IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
DNS names (realms) from NetBIOS domain names.
Until now, we would experience delays as we broadcast lookups for DNS names
onto the local network segments.
Now if DNS comes back negative, we fall straight back to looking up the
short name.
Andrew Bartlett
(This used to be commit 32397c8b01)
restored on next valid packet if a logon fails. This has relevence
if people are using su.exe within logon scripts !
Jeremy.
(This used to be commit d405a93a9d)
to pstr_sprintf() and fstr_sprintf() to try to standardize.
lots of snprintf() calls were using len-1; some were using
len. At least this helps to be consistent.
(This used to be commit 9f835b85dd)
- The 'not implmented' checks are now done by all auth modules
- the ntdomain/trustdomain/winbind modules are more presise as to
what domain names they can and cannot handle
- The become_root() calls are now around the winbind pipe opening only,
not the entire auth call
- The unix username is kept seperate from the NT username, removing the
need for 'clean off the domain\' in parse_net.c
- All sid->uid translations are now validated with getpwuid() to put a very
basic stop to logins with 'half deleted' accounts.
Andrew Bartlett
(This used to be commit 85f88191b9)
* is_trusted_domain() is broken without winbind. Still working on this.
* get_global_sam_name() should return the workgroup name unless we
are a standalone server (verified by volker)
* Get_Pwnam() should always fall back to the username (minus domain name)
even if it is not our workgroup so that TRUSTEDOMAIN\user can logon
if 'user' exists in the local list of accounts (on domain members w/o
winbind)
Tested using Samba PDC with trusts (running winbindd) and a Samba 3.0
domain member not running winbindd.
notes: make_user_info_map() is slightly broken now due to the
fact that is_trusted_domain() only works with winbindd. disabled
checks temporarily until I can sort this out.
(This used to be commit e1d6094d06)
to handle domain trusts. Jeremy and I talked about this
and it's going in as working code. It keeps winbind clean
and solves the trust problem with minimal changes.
To summarize, there are 2 basic cases where the deadlock would
occur. (1) lookuping up secondary groups for a user, and
(2) get[gr|pw]nam() calls that fall through the NSS layer because
they don't exist anywhere.
o To handle case #1, we bypass winbindd in sys_getgrouplist() unless
the username includes the 'winbind separator'.
o Case #2 is handled by adding checks in winbindd to return failure
if we are a DC and the domain matches our own.
This code has been tested using basic share connections, domain
logons, and with pam_winbind (both with and without 'winbind
use default domain'). The 'trustdomain' auth module should work
as well if an admin wants to manually create UNIX users for
acounts in the trusted domains.
Other misc fixes:
* we need to fix check_ntlm_password() to be able to determine
if an auth module is authoritative over a user (NT_STATUS_WRONG_PASSWORD,
etc...). I worked around my specific situation, but this needs to be
fixed. the winbindd auth module was causing delays.
* fix named server mutex deadlock between trust domain auth module
and winbindd looking up a uid
* make sure SAM_ACCOUNT gets stored in the server_info struct for the
_net_sam_logon() reply.
Configuration details:
The recommended method for supporting trusts is to use winbind.
The gets us around some of the server mutex issues as well.
* set 'files winbind' for passwd: and group: in /etc/nsswitch.conf
* create domain trusts like normal
* join winbind on the pdc to the Samba domain using 'net rpc join'
* add normal parameters to smb.conf for winbind
* set 'auth method = guest sam winbind'
* start smbd, nmbd, & winbindd
Problems that remain:
* join a Windows 2k/XP box to a Samba domain.
* create a 2-way trust between the Samba domain
and an NT domain
* logon to the windows client as a user from theh trusted
domain
* try to browse server in the trusted domain (or other
workstations). an NT client seems to work ok, but 2k
and XP either prompt for passwords or fail with errors.
apparanently this never got tested since no one has ever been
able to logon as a trusted user to a Samba domain from a Windows
client.
(This used to be commit f804b590f9)
map to guest = bad user works again when "trustdomain" is listed
as last auth method.
Also clean up some more DC location calls.
(This used to be commit 77a5b1032f)
*) consolidates the dc location routines again (dns
and netbios) get_dc_list() or get_sorted_dc_list()
is the authoritative means of locating DC's again.
(also inludes a flag to get_dc_list() to define
if this should be a DNS only lookup or not)
(however, if you set "name resolve order = hosts wins"
you could still get DNS queries for domain name IFF
ldap_domain2hostlist() fails. The answer? Fix your DNS
setup)
*) enabled DOMAIN<0x1c> lookups to be funneled through
resolve_hosts resulting in a call to ldap_domain2hostlist()
if lp_security() == SEC_ADS
*) enables name cache for winbind ADS backend
*) enable the negative connection cache for winbind
ADS backend
*) removes some old dead code
*) consolidates some duplicate code
*) moves the internal_name_resolve() to use an IP/port pair
to deal with SRV RR dns replies. The namecache code
also supports the IP:port syntax now as well.
*) removes 'ads server' and moves the functionality back
into 'password server' (which can support "hostname:port"
syntax now but works fine with defaults depending on
the value of lp_security())
(This used to be commit d7f7fcda42)
* move back to qsort() for sorting IP address in get_dc_list()
* remove dc_name_cache in cm_get_dc_name() since it slowed
things down more than it helped. I've made a note of where
to add in the negative connection cache in the ads code.
Will come back to that.
* fix rpcclient to use PRINTER_ALL_ACCESS for set printer (instead
of MAX_ALLOWED)
* only enumerate domain local groups in our domain
* simplify ldap search for seqnum in winbindd's rpc backend
(This used to be commit f8cab8635b)
This replaces the universal group caching code (was originally
based on that code). Only applies to the the RPC code.
One comment: domain local groups don't show up in 'getent group'
that's easy to fix.
Code has been tested against 2k domain but doesn't change anything
with respect to NT4 domains.
netsamlogon caching works pretty much like the universal group
caching code did but has had much more testing and puts winbind
mostly back in sync between branches.
(This used to be commit aac01dc7bc)
important once we start doing schannel, as there would be a lot more
roundtrips for the second PIPE open and bind. With this patch logging
in to a member server is a matter of two (three if you count the
ack...) packets between us and the DC.
Volker
(This used to be commit 5b3cb7725a)
- better error codes than NT_STATUS_UNSUCCESSFUL for domain logon errors
- make auth_winbind load the ntdomain module if winbind isn't there.
- use new trusted domains cache to determine if the domain is valid.
Andrew Bartlett
(This used to be commit ec8d6524c6)
This allows us to join as a BDC, without appearing on the network as one
until we have the database replicated, and the admin changes the configuration.
This also change the SID retreval order from secrets.tdb, so we no longer
require a 'net rpc getsid' - the sid fetch during the domain join is sufficient.
Also minor fixes to 'net'.
Andrew Bartlett
(This used to be commit 876e00fd11)
NTLM Authentication:
- Add a 'privileged' mode to Winbindd. This is achieved by means of a directory
under lockdir, that the admin can change the group access for.
- This mode is now required to access with 'CRAP' authentication feature.
- This *will* break the current SQUID helper, so I've fixed up our ntlm_auth
replacement:
- Update our NTLMSSP code to cope with 'datagram' mode, where we don't get a
challenge.
- Use this to make our ntlm_auth utility suitable for use in current Squid 2.5
servers.
- Tested - works for Win2k clients, but not Win9X at present. NTLMSSP updates
are needed.
- Now uses fgets(), not x_fgets() to cope with Squid environment (I think
somthing to do with non-blocking stdin).
- Add much more robust connection code to wb_common.c - it will not connect to
a server of a different protocol version, and it will automatically try and
reconnect to the 'privileged' pipe if possible.
- This could help with 'privileged' idmap operations etc in future.
- Add a generic HEX encode routine to util_str.c,
- fix a small line of dodgy C in StrnCpy_fn()
- Correctly pull our 'session key' out of the info3 from th the DC. This is
used in both the auth code, and in for export over the winbind pipe to
ntlm_auth.
- Given the user's challenge/response and access to the privileged pipe,
allow external access to the 'session key'. To be used for MSCHAPv2
integration.
Andrew Bartlett
(This used to be commit ec071ca3dc)
90% fix for CR 1076. The password server parameter will no take things
like
password server = DC1 *
which means to contact DC1 first and the go to auto lookup if it
fails.
jerry
(This used to be commit 016ef8b36b)
This commit builds on the auth subsystem to give Samba support for trusting NT4
domains. It is off by default, but is enabled by adding 'trustdomain' to the
'auth methods' smb.conf paramater.
Tested against NT4 only - there are still some issues with the join code for
Win2k servers (spnego stuff).
The main work TODO involves enumerating the trusted domains (including the RPC
calls to match), and getting winbind to run on the PDC correctly.
Similarly, work remains on getting NT4 to trust Samba domains.
Andrew Bartlett
(This used to be commit ac8c24a9a8)
Remove a stray 'unbecome_root()' in the ntdomain an auth failure case.
Only allow trust accounts to request a challange in srv_netlogon_nt.c.
Currently any user can be the 'machine' for the domain logon. MERGE for 2.2.
Andrew Bartlett
(This used to be commit 0242d0e178)
this is needed because W2K will send a TCP reset to any open
connections that have not done a negprot when a second connection is
made. This meant that under heavy netlogon load a Samba domain member
would fail authentications.
Jeremy, you may wish to port this to 2.2.x
(This used to be commit eb196070e6)
info3. These are RIDs, and it only makes sense to combine them with the domain
SID returned with them. This is important for trusted domains, where that sid
might be other than the one we currently reterive from the secrets.tdb.
Also remove the become_root()/unbecome_root() wrapper from around both
remaining TDB users: Both are now initialised at smbd startup.
Andrew Bartlett
(This used to be commit 554842e0a5)
Added TODO about perhaps doing a SAMLOGON udp/138 request before a
cli_full_connection in connect_to_domain_password_server()
(This used to be commit b61e40a5be)
This occured when the attempt to contact the PDC failed. The connection code
has already shut down the connection, and 'free'ed the cli or has never
initialised it in the first place.
Andrew Bartlett
(This used to be commit 37ce763043)
This work was sponsored by Optifacio Software Services, Inc.
Andrew Bartlett
(various e-mails announcements merged into some form of commit message below:)
This patch which adds basics of universal groups support
into Samba 3. Currently, only Winbind with RPC calls supports this, ADS
support requires additional (possibly huge) work on KRB5 PAC. However,
basic infrastructure is here.
This patch adds:
1. Storing of universal groups for particular user logged into Samba
software (smbd/ two winbind-pam methods) into netlogon_unigrp.tdb as array
of uint32 supplemental group rids keyed as DOMAIN_SID/USER_RID in tdb.
2. Fetching of unversal groups for given user rid and domain sid from
netlogon_unigrp.tdb.
Since this is used in both smbd and winbindd, main code is in
source/lib/netlogon_uingrp.c. Dependencies are added to AUTH_OBJ as
UNIGRP_OBJ and WINBINDD_OBJ as UNIGRP_OBJ.
This patch has had a few versions, the final version in particular:
Many thanks to Andrew Bartlett for critics and comments, and partly
rewritten code.
New:
- updated fetching code to changed byte order macros
- moved functions to proper namespace
- optimized memory usage by reusing caller's memory context
- enhanced code to more follow Samba coding rules
Todo:
- proper universal group expiration after timeout
(This used to be commit 80c2aefbe7)
