IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We also log if a simple bind was over TLS, as this particular case matters to a lot of folks
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
gensec_session_info() is not called for bare NTLM, so we have to log manually
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-Programmed-by: Gary Lockyer <gary@catalyst.net.nz>
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
This ensures that gensec, and then the NTLM auth subsystem under it, always gets the
remote and local address pointers for potential logging.
The local address allows us to know which interface an authentication is on
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-Programmed-by: Gary Lockyer <gary@catalyst.net.nz>
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
This ensures that gensec, and then the NTLM auth subsystem under it, always gets the
remote and local address pointers for potential logging.
The local address allows us to know which interface an authentication is on
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-Programmed-by: Gary Lockyer <gary@catalyst.net.nz>
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Add a human readable authentication log line, to allow
verification that all required details are being passed.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-Programmed-by: Gary Lockyer <gary@catalyst.net.nz>
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
This will allow us to get the SID in another location for logging
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-Programmed-by: Gary Lockyer <gary@catalyst.net.nz>
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
We will soon have a much better replacement, but a note here may help some in the transition
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-Programmed-by: Gary Lockyer <gary@catalyst.net.nz>
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
This will allow the logging code to make clear which protocol an authentication was for.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-Programmed-by: Gary Lockyer <gary@catalyst.net.nz>
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
This allows the GENSEC service description to be set from the various callers
that go via this function.
The RPC service description is the name of the interface from the IDL.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-Programmed-by: Gary Lockyer <gary@catalyst.net.nz>
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
So far this is only on the AD DC
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Pair-Programmed-by: Gary Lockyer <gary@catalyst.net.nz>
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
This makes the USER_INFO_LOCAL_SAM_ONLY and AUTH_METHOD_LOCAL_SAM
interaction obsolete.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=2976
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
For now they'll all do the same, but that will change in the following commits.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=2976
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Move everything but the strict loop logic outside. This makes the
loop exit condition clearer to me: Anything but NOT_IMPLEMENTED breaks
the loop.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=2976
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
So far if any kind of error has happened, we just tried further auth
modules. An auth module should have the chance to definitely say "no,
this is a valid error, no further attempts anywhere else". The protocol
so far was for an auth module to return NT_STATUS_NOT_IMPLEMENTED if it
wanted to pass on to other modules, but any error led to the next auth
modules also being given a try.
This patch makes any auth module return code except NOT_IMPLEMENTED to
terminate the loop, such that every module has to explicitly request to
pass on to the next module via NOT_IMPLEMENTED.
All modules we reference in make_auth_context_subsystem() have code to
explicitly say "not for me please" with NOT_IMPLEMENTED.
This *might* break existing setups which fail in for example "guest" or
"winbind" due to other reasons. I prefer it this way though, because
adding another parameter like "This is a real authoritative failure,
don't go looking somewhere else" will only add to the mess.
But it's more a theoretical than a practical change with the
default auth backends.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=2976
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Take a string instead of a string list. Simplifies
make_auth_context_subsystem and later similar callers
BUG: https://bugzilla.samba.org/show_bug.cgi?id=2976
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Use "git show -b" to see the simple diff.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=2976
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
No intended code change, just reformatting and a goto fail with
inverted logic
Best viewed with "git show -b"
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Mar 9 02:01:35 CET 2017 on sn-devel-144
No intended code change, just reformatting and a goto fail with
inverted logic
Best viewed with "git show -b" :-)
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Instead of directly assigning (*pserver_info), work on a local copy
first and assign it once when successful
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Use talloc_stackframe and talloc_tos. Don't bother to talloc_free
within the loop, we don't have many iterations.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Preparation for simplified talloc handling. Slight behaviour change:
We now ZERO_STRUCTP(pserver_info) in all failure cases.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We have global_sid_System, so we don't need to dom_sid_parse("S-1-5-18");
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Feb 27 11:31:53 CET 2017 on sn-devel-144
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
It seems that this was only used in OneFS. The filesystem parts were
removed in 2012 with 70be41c772d.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
... Saves a few bytes of footprint
Signed-off-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This makes it more obvious where this legacy code is used
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sun Nov 20 06:23:19 CET 2016 on sn-devel-144
When mapping user and domain during NTLM authentication, an empty domain
is mapped to the local SAM db. However, an empty domain may legitimately
be used if the user field has both user and domain in upn@realm format.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12375
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Trever L. Adams <trever.adams@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Oct 13 04:26:26 CEST 2016 on sn-devel-144
