IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This causes any tracked connections for the IP address to be lost.
When doing a takeip, the server sends a tickle ACK to the client, the
client responds with a valid ACK and the server's TCP stack responds
with a reset because the connection does not exist. However, in the
updateip, case the connection *does* exist, so the tickle *does not*
cause the connection to be reset.
ctdb_announce_vnn_iface() clears the list of tracked TCP connections
while sending the tickle ACKs. So, if there are no reconnects as in
the takeip case, then the list of connections is simply lost.
The "updateip" event in the 10.interface event script already sends
gratuitous ARPs and tickles connections in both directions. This
ensures that traffic continues after packets may have been dropped
when the script temporarily blocks traffic to the IP address.
All of this means that the call to ctdb_announce_vnn_iface() can just
be deleted.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Introduce a single new tunable IPAllocAlgorithm to set the IP
allocation algorithm. This defaults to 2 for LCP2 IP address
allocation.
Tunables LCP2PublicIPs and DeterministicIPs are obsolete.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Instead of gathering the value from all nodes, just use the value on
the recovery master and have it affect all nodes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Instead of gathering the value from all nodes, just use the value on
the recovery master and have it affect all nodes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the interfaces have different names then they are different
interfaces.
Also, move assignment of new_name just above where is is first used.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Now takes a pointer to an interface structure and does direct pointer
comparisons.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To keep this change small, this leaves behind some redundant calls to
ctdb_find_iface() and similar. They will be cleaned up later.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This will allow a change to the way interfaces are handled in a VNN.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There's no point parsing the interfaces twice, especially since it
doesn't improve error handling.
This also removes a use of strdup(3)/free(3), which is not generally
used in our code.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Also add a missing out-of-memory check for vnn->ifaces.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This also moves the interface validation down, making more obvious
that it can be consolidated.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If anything should be used here it should be talloc functions.
However, this is a remnant from when ctdb_sys_find_ifname() was used
here and, for some reason, it used strdup(3).
In this case the interface string doesn't actually need to be copied.
The only use of it is when ctdb_event_script_callback_v() uses it with
the format string in a call to talloc_vasprintf(). In the same
context the IP address isn't copied.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If *async_reply isn't set then the calling code will reply to the
control and free the control structure. In some places the control
structure pointer is stolen onto state before a synchronous exit due
to an error condition. The error handling then frees state and
returns an error. The calling code will access-after-free when trying
to reply to the control.
To make this easier to understand, the convention is that any
(immediate) error results in a synchronous reply to the control via an
error return code AND *async_reply not being set. In this case the
control structure pointer should never be stolen onto state. State is
never used for a synchronous reply, it is only ever used by a
callback.
Also initialise state->c to NULL so that any premature call to a
callback (e.g. in an immediate error path) is more obvious.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12180
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
When an error occurs so an IP address is not released then the PNN in
the VNN is currently incorrectly updated.
Instead, update the PNN in the callback when the release is
successful. Also, explicitly update the PNN on redundant releases.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12158
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Sun Aug 21 22:45:33 CEST 2016 on sn-devel-144
Many years ago takeover_callback_state was used for both IP takeover
and release. Now it is only used when releasing an IP so rename it to
improve clarity.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12158
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Commit c40fc62642ff5ac49b75e9af49c299e33dbc9073 runs the IP allocation
algorithm after calculating the timeout offset. If the algorithm
takes a long time then there may be no attempt to release or take over
IPs.
Instead, reset the timeout just before the RELEASE_IP stage if an
early jump to IPREALLOCATED was not taken.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12161
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Thu Aug 18 12:36:37 CEST 2016 on sn-devel-144
Cause an "updateip" instead of just logging a message.
This may reset existing connections. However, CTDB doesn't think the
address should already be hosted on the node so there should be no
connections.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This doesn't currently happen but it will in a subsequent commit.
That commit and this one could be squashed but then the functional
change gets lost in amongst this one.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This reverts commit 4136f2714578a9bc0e5632a21d287a50f9ec137a.
If the IP address is on an interface then it won't help to pretend
that it isn't. This will simply cause a takeip event, which will fail
because the address can't be added. Note that the IP address isn't
necessarily new - something unexpected may have happened.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The address may already be assigned to another node, so this is wrong.
It also leaves the interface unknown.
This is better left to code that handles rogue IP addresses. A
takeover run should correctly takeover the address if it is assigned
to this node or release it if it is assigned to another node. Coming
soon...
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This has the advantage of using common code. Also, if there was
previously a failed attempt to release the IP address as part of a
delete, then this will finish processing the delete.
Extra care needs to be taken when a VNN is actually deleted.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12158
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This contains the cleanup that needs to be done after an IP address is
released from an interface.
state->vnn is set to the return value from release_ip_post(), which is
either the original VNN, or NULL if it was deleted. This allows
correct handling of the in-flight flag in the destructor for state.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12158
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If there's an allocation failure then the implicit early return in
CTDB_NO_MEMORY_VOID() means that no reply is sent to the control.
ctdb_daemon_send_message() makes a copy of the data, so don't copy it
here and remove an unnecessary chance of failure.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12158
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If RELEASE_IP fails then updating the VNN makes it inconsistent with
reality. Instead, log the failure and move on to the next IP
address.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12158
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The "releaseip" event in 10.interface will determine the interface and
do the right thing.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12158
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Interfaces going up or down are always interesting, so log these at
error level.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12157
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This drastically simplifies the code. "ctdb reloadips" behaves the
same, since it causes a takeover run immediately after IPs are
deleted. "ctdb delip" now needs to be followed with an explicit "ctdb
ipreallocate".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
RELEASE_IP sometimes times out because killing TCP connections can
take a long time.
The aim of the takeover timeout is actually to limit the total amount
of time for an IP takeover run. So, calculate a combined timeout
offset once and use it for each of the RELEASE_IP, TAKEOVER_IP,
IPREALLOCATED stages. This gives RELEASE_IP more time to kill TCP
connections but still limits the total time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
No longer require CTDB context but pass in number of nodes, algorithm,
no_ip_failback and force_rebalance_nodes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Abstracts out code involving internals of IP allocation state.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
How the existing IP layout is constructed and how the merged IP list is
sorted are important aspects of the IP allocation algorithm. Construct the
merged IP list when known and available IPs are assigned.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use ctdb_fetch_remote_public_ips() inline to fetch each list. Assign
them into the IP allocation state separately.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
