IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Need to be able to recognise a RHEL system. Still use "system" to
start and stop service, since that still works and yields the smallest
change.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Commit 176ae6c704 caused these functions
to exit on failure. This is incorrect and broke NAT gateway.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This feature was added quite a while ago but was not enabled by
default. It is a useful feature so enable it to dump stack traces of
up to 5 stuck processes by default.
This can be disabled by setting:
CTDB_NFS_DUMP_STUCK_THREADS=0
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Feb 25 04:06:45 CET 2014 on sn-devel-104
This comment was true when 50.samba was spaghetti because it tried to
automatically manage both smbd (and nmbd) and winbind. It isn't true
anymore.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Feb 19 04:07:12 CET 2014 on sn-devel-104
If a primary IP address is being deleted from an interface, the
secondaries are remembered and added back after the primary is
deleted. This is done under a lock shared by the add/del script code.
It is necessary because, by default, Linux deletes secondaries when
the corresponding primary is deleted.
There is a race here between ctdbd and the scripts, since ctdbd
doesn't know about the lock. If ctdbd receives a release IP control
and the IP address is not on an interface then it is regarded as a
"Redundant release of IP" so no "releaseip" event is generated. This
can occur if the IP address in question is a secondary that has been
temporarily dropped. It is more likely if the number of secondaries
is large.
Since Linux 2.6.12 (i.e. 2005) Linux has supported a
promote_secondaries option on interfaces. This option is currently
undocumented but that will change in Linux 3.14. With
promote_secondaries enabled the kernel will not drop secondaries but
will promote a corresponding secondary instead. The kernel does all
necessary locking.
Use promote_secondaries to simplify the code, avoid re-adding
secondaries, avoid re-adding routes and provide improved performance.
This could be done conditionally, with a fallback to legacy
secondary-re-adding code, but no supported Linux distribution is
running a pre-2.6.12 kernel so this is unnecessary.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Services can be flagged for reconfigure when they release IPs at
shutdown. The flag is never removed and the service is prematurely
reconfigured during the first "ipreallocated" event, before any IPs
are hosted and before the "startup" event has actually started the
services.
$CTDB_VARDIR/state directly contained the service state subdirectories
and is already removed in the "init" event. Just push the service
state subdirectories down a level and put everything else in a
subdirectory.
This way all the eventscript state gets cleaned up every time CTDB
starts up.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Jan 17 09:58:26 CET 2014 on sn-devel-104
Currently the lock is held until the corresponding eventscript
completes, since the process still exists. If the regular part of an
eventscript hangs then the lock might unnecessarily be held for a long
time. The pathological case is when a monitor event gets stuck in
D-wait state and the script times out but can't be killed so the lock
is still held. This can cause an unwanted monitor replay.
Change this so that the lock is released immediately after the
reconfiguration is complete.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
"monitor" events can be cancelled. If a reconfigure action does a
service restart then the "monitor" event can be cancelled at the
inconvenient moment after the service is stopped. In this case the
service stays down and the node may become unhealthy (depending on
whether there are any repair actions in the monitor event).
A long time ago we did service reconfiguration in "monitor" events
following failovers. Service reconfiguration was then moved to the
"ipreallocated" event. However, reconfiguration in "monitor" events
has been kept as a last resort in case an "ipreallocate" event does
not occur. The only important case that this covers is "ctdb
deleteip", where "releaseip" events are generated without a
corresponding "ipreallocated". Therefore, IPs can be deleted without
running the required service reconfiguration.
The supported way of removing IP addresses is now via "ctdb
reloadips", which always causes a takeover run with a corresponding
"ipreallocate" event.
This means that service reconfiguration in "monitor" events is no
longer required and should be removed because it is unsafe.
Also update the associated tests. Make the first confirm that the
monitor event no longer does reconfiguration. Change the others to
test that monitor status is correctly replayed when something else is
doing a reconfigure and currently holds the reconfigure lock.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Dec 17 06:32:35 CET 2013 on sn-devel-104
A generic framework is no longer needed now that the "ctdb" checker is
the only one left. Simplify the code.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 044d302b41a2040642355401e3236fcecc3a620a)
"ctdb checktcpport" is no longer experimental so the other checkers
are no longer required.
Remove tests related to the removed checkers.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 50e330d0679614bee2e7bab028436e929f74ca50)
The current setting is inconsistent with settings on most systems,
putting /bin before /sbin. Use of /usr/local/bin, which may be
required on some systems, is also overridden. This can make it
difficult to do interactive debugging of script problems.
Rely on the system PATH instead.
If system-specific changes need to be made then this can be done in a
configuration file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit cfbff39e22e42f3997f637290748290833525714)
The old logic was actually wrong. If CTDB_LOGFILE is unset then a
default is used, not syslog.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 79e2029f9bc078126e865aa715100a3870c7604b)
Allowing people to put random options in CTDB_OPTIONS complicates some
logic (particularly around use of syslog). If we're going to have
variables for options then let's make sure we have a variable for each
option and make people use them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit e55f3a1577eff0182802b0341d865d961aeae1c7)
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 8f660d0dd52013e5876806be908e8e603aa6e968)
It should print the actual number of consecutive failures rather than
the limit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit ff5f0d1e29af2b293e30cdc54bed03a644be7038)
This makes the gaps in the logs more obvious.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 11fbf4789d783dd0bac22754b374dd9ea4b03bad)
Passing "localhost" to the rpcinfo command causes overheads, like
reading /etc/services multiple times.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 1d61988af9e4fa3621a3e2d06a859bcb53df2d67)
Also add it to the corresponding eventscript unit test infrastructure.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit f4ef83a256f59eeb00b9a5bc10c28347e1ad1031)
While doing this:
* Explicitly assign RPC program and version information in
_nfs_check_rpc_common(). This is more lines of code but is easier
to read.
* Don't print the options when starting a service. Trying to print it
makes the code messy for little benefit.
Update the eventscript unit testing code and a Ganesha test to
reflect this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit e8b531405665885196c95fe1608db33a255bf761)
That is, /dev/null the "stop" output. This is consistent with the way
CTDB generally deals with the output when stopping a service.
It also makes updating the eventscript unit tests easier.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit c7332526b1b488abefeb4be78a7cd3f2f9abc451)
This avoids issuing multiple "ctdb killtcp" commands to terminate tcp
connections, one per connection. This will considerably reduce the
time when there is a large number of tcp connections. This also makes
it possible to avoid calling "ctdb killtcp" when there are no connections.
Add a couple of unit tests for killtcp and update eventscript unit
test infrastructure to support.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit a20d94717d2e4ab866d8a002cdf39c0669b74c6a)
Otherwise secondary addresses that aren't owned by CTDB could be
dropped.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 5ffce65a1ad659b198ddf647622b899bdde45c72)
Change all callers to maintain current behaviour.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 0b67397ef5419c781a35916575151da7b7e7cc27)
If some nfsd threads are still alive after a shutdown during a restart
then this indicates the maximum number of threads for which a stack
trace should be dumped. This can be useful for trying to determine
why nfsd is stuck.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 2503245db10d567af708a04edd3a3b488c24f401)
60.nfs and 60.ganesha touch $statd_update_trigger every time they're
run. This stops the statd-callout updates from ever being called.
Make this logic self-contained and move it to new function
nfs_statd_update() in the functions file. Call this in 60.nfs and
60.ganesha with the appropriate update period as the only argument.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reported-by: Poornima Gupte <poornima.gupte@in.ibm.com>
(This used to be ctdb commit 1b5968f6be084590667f4f15ff3bef13ed9a2973)
This is needed for AIX and possibly others.
Also provide a cheaper mktemp function is needed in the run_tests
script.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit b2b572e9049c7138bd223226475bef8fe3e01f10)
fff88940f71058e4eefd65f50a6701389c005c17 introduced a regression.
Without $service_name set by default, the CTDB configuration is no
longer loaded when loadconfig() is called without any arguments.
That's bad.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit f1619a36c1beba11533052dc5728fa3adaa08870)
No longer used, support removed from test infrastructure.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 0eb351ff4c7ee096de7c5e0a59561067091fa32e)
Want nfs_check_rpc_services() to support filenames without the 'k'.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit d9775fcbd6e30eef8382bea68e2f9bad2309f2c1)
This is intended to replace nfs_check_rpc_service(), which builds
configuration into eventscripts.
nfs_check_rpc_services() uses a directory of configuration checks that
can be edited by an administrator. The files have one limit check and
a set of actions per line. The program name is extracted from the
file name.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 9bc8fbee6550ed2814fb35c70d57fab21ef1b8fd)
This creates new function _nfs_check_rpc_common().
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit cc3bb42e48bbdabd19187c231846b98589b4f4f3)
This is unused so doesn't need to be maintained. An attempt to use it
now will explicitly fail rather than implicitly fail via bitrot.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 887733dd7be53158bfe07b30ef31b611d0f8122f)
This reverts commit 92f74fd589467b46c758e116e97417edfe8773d7.
This change is unused and is just complicating the function.
Conflicts:
config/functions
(This used to be ctdb commit 77302dbfd85754e02559eccb2dd6c090db0b6b9f)
The code in 60.nfs is going to be genericised, so make all the checks
look the same.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 15b0f78cbf8d6ba481b7eba9e4fe3f4270214c72)
This has 2 advantages:
1. It uses get_tcp_connections_for_ip() to check for leftover
connections, instead of custom code.
2. It checks for the timeout condition before sleeping. The current
code sleeps and then checks, so wastes a second.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 60a08eb96e1d97aab31e9bd4af01683c650541c2)
Uses new function get_tcp_connections_for_ip(). This avoids using a
temporary file and running netstat twice.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit a621622903c7ef17764b15293d6ea8df5a53c7e1)
... using kill_tcp_connections()
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 10e4db8f796d1e3259733180494db3b4bbad291a)
This change is a no-op. However, In a subsequent commit we'll merge
kill_tcp_connections_local_only() with this function.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 23c0f5f48e3e5a0c1a3254c582299f7893cf0d33)
Setting these variables spawns lots of unnecessary processes, which
would surely slow down these functions on a busy system.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 3eae161472e6352f7f656851c73dc056f95113eb)
