IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This fixes a bug when using encrypted transport and DFS links. Found
by my basic DFS torture test, which I'll check in next. Testing *rocks* :-).
Jeremy.
Convert all uses of cli_open(), cli_nt_createXXX to NTSTATUS versions.
This is smaller than it looks, it just fixes a lot of old code.
Next up, ensure all cli_XX functions return NTSTATUS.
Jeremy.
I know this is just yet another iteration, but I like this one much better than
the one that exists right now :-)
It will do trans and echo requests without a _recv helper and without
unnecessary memcpy().
We store the seqnum/mid mapping in the cli_request structure
for async requests and in the cli_state structure for sync calls.
We skip the signing check for oplock requests while waiting
for async requests coming in.
metze
the problem that stops libsmbclient being thread safe. Subsidiary
DFS connections are now hung off a list inside the cli_state struct.
Much more to do in order to get libsmbclient to thread safety, but
this is a good start.
Jeremy.
Each cli struct has it's own local copy of this variable,
so use that in client code. In the smbd server, add one
static to smbd/proccess.c and use that inside smbd. Fix
a bunch of places where smb_rw_error could be set by
calling read_data() in places where we weren't reading
from the SMB client socket (ie. winbindd).
Jeremy.
(This used to be commit 255c2adf7b)
the incoming buffer in the non-signed case. Speeds
up writes by over 10% or so. Complete the server
recvfile implementation.
Jeremy.
(This used to be commit 81ca5853b2)
to struct sockaddr_storage in most places that matter (ie.
not the nmbd and NetBIOS lookups). This passes make test
on an IPv4 box, but I'll have to do more work/testing on
IPv6 enabled boxes. This should now give us a framework
for testing and finishing the IPv6 migration. It's at
the state where someone with a working IPv6 setup should
(theorecically) be able to type :
smbclient //ipv6-address/share
and have it work.
Jeremy.
(This used to be commit 98e154c312)
bugs in various places whilst doing this (places that assumed
BOOL == int). I also need to fix the Samba4 pidl generation
(next checkin).
Jeremy.
(This used to be commit f35a266b3c)
for the server side enc. (doesn't break anything).
I'll keep updating this until I've got NTLM seal working
on both client and server, then add in the gss level
seal.
Jeremy.
(This used to be commit 530ac29abf)
process deep dfs links (ie. links that go to non root
parts of a share). Make the directory handling conanonical
in POSIX and Windows pathname processing.
dfs should not be fully working in client tools. Please
bug me if not.
Jeremy.
(This used to be commit 1c9e10569c)
on the wire. This allows us to go to nsec resolution
for systems that support it. It should also now be
easy to add a correct "create time" (birth time)
for systems that support it (*BSD). I'll be watching
the build farm closely after this one for breakage :-).
Jeremy.
(This used to be commit 425280a1d2)
* \PIPE\unixinfo
* winbindd's {group,alias}membership new functions
* winbindd's lookupsids() functionality
* swat (trunk changes to be reverted as per discussion with Deryck)
(This used to be commit 939c3cb5d7)
cd up and down the tree and get directory listings.
Still have to figure out how to get a directory listing on a
2k dfs root. Also have to work out some issues with relative paths
that cross dfs mount points.
We're protected from the new code paths when connecting to
a non-dfs root share ( the flag from the tcon&X is stored
in the struct cli_state* )
(This used to be commit e57fd2c5f0)
supported pipe. Netlogon is still special, as we open that twice, one to do
the auth2, the other one with schannel.
The client interface is completely unchanged for those who only use a single
pie. cli->pipe_idx is used as the index for everything except the "real"
client rpc calls, which have been explicitly converted in my last commit. Next
step is to get winbind to just use a single smb connection for multiple pipes.
Volker
(This used to be commit dc294c52e0)
then is the client supports it (current clients supported are Samba and
CIFSVFS - detected by the negprot strings "Samba", "POSIX 2" and a bare
"NT LM 0.12" string) then the setting of the per packet flag smb_flag
FLAG_CASELESS_PATHNAMES is taken into account per packet. This allows
the linux CIFS client to use Samba in a case sensitive manner.
Additional command in smbclient "case_sensitive", toggles the
flag in subsequent packets.
Docs to follow.
Jeremy.
(This used to be commit cf84c0fe1a)
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0d)
Ensure a server can't do a downgrade attack if client signing is mandatory.
Add a lp_server_signing() function and a 'server signing' parameter that
will act as the client one does.
Jeremy
(This used to be commit 203e4bf0bf)
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9ea)
rpcclient -S pdc -U% -c "samlogon user password"
and it should work with the schannel. Needs testing against platforms
different from NT4SP6.
Volker
(This used to be commit eaef0d8aef)
A much better SMB signing module, that allows for mulitple signing algorithms
and correctly backs down from signing when the server cannot sign the reply.
This also attempts to enable SMB signing on NTLMSSP connections, but I don't
know what NTLMSSP flags to set yet.
This would allow 'client use signing' to be set by default, for server
compatability. (A seperate option value should be provided for mandetory
signing, which would not back down).
Andrew Bartlett
(This used to be commit 1c87be7a3d)
- new kerberos code, allowing the account to change it's own password
without special SD settings required
- NTLMSSP client code, now seperated from cliconnect.c
- NTLMv2 client code
- SMB signing fixes
Andrew Bartlett
(This used to be commit 837680ca51)
NTLMSSP in cli_establish_connection()
What we really need to do is kill off the pwd_cache code. It is horrible,
and assumes the challenge comes in the negprot reply.
(This used to be commit 3f919b4360)
activate you need to:
- install krb5 libraries
- run configure
- build smbclient
- run kinit to get a TGT
- run smbclient with the -k option to choose kerberos auth
(This used to be commit d330575856)
server. This is just a framework right now - I want this to eventually
replace the win32 test code from monyo
The interesting this about this test is that it shows up a really
horrible performance bug in our stat cache code. I'll see if I can fix
it.
(This used to be commit eb668b54af)
I've currently got this code disabled by default as it is
incomplete. You enable it by setting a USE_UNICODE environment
variable. Once the support is complete this check will be removed and
the CAP_UNICODE capability bit will be the sole determination of
whether the client library code uses unicode
right now I have converted session_setup and tconx. I will do more fns
over the next few days.
see clistr.c for the new client side string interface. Luckily it
tends to make the code smaller and neater while adding unicode
support.
(This used to be commit e1a04e621f)
a byte range lock (write lock only, but Win2k breaks on read lock also so I
do the same) - if you think about why, this is obvious. Also fixed our client
code to do level II oplocks, if requested, and fixed the code where we would
assume the client wanted level II if it advertised itself as being level II
capable - it may not want that.
Jeremy.
(This used to be commit 213cd0b519)
in the RPC code. This change was prompted by trying to save a long (>256)
character comment in the printer properties page.
The new system associates a TALLOC_CTX with the pipe struct, and frees
the pool on return of a complete PDU.
A global TALLOC_CTX is used for the odd buffer allocated in the BUFFERxx
code, and is freed in the main loop.
This code works with insure, and seems to be free of memory leaks and
crashes (so far) but there are probably the occasional problem with
code that uses UNISTRxx structs on the stack and expects them to contain
storage without doing a init_unistrXX().
This means that rpcclient will probably be horribly broken.
A TALLOC_CTX also needed associating with the struct cli_state also,
to make the prs_xx code there work.
The main interface change is the addition of a TALLOC_CTX to the
prs_init calls - used for dynamic allocation in the prs_XXX calls.
Now this is in place it should make dynamic allocation of all RPC
memory on unmarshall *much* easier to fix.
Jeremy.
(This used to be commit 0ff2ce543e)
semi-connection and a rpcclient prompt, but no functionality there yet.
Will be a few more days on that.
The changes to the header files were minor. A few struct's and a few
additional fields to existing ones. No deletions. **minimal change
necessary** :-) Well, maybe not minimal, but I tried.
All other programs compile, link and run ok from what I can tell so
I don;t think I broke anything.
--jerry
(This used to be commit cd7f0b0b91)
We finally have a perfect emulation of Microsoft wildcard
matching. The routine ms_fnmatch() does wildcard matching with all MS
wildcards (including the unicode wildcards), and masktest against a
NT4 workstation with hundreds of thousands of random exmaples has not
found a single error.
amazingly it is only about 60 lines of code, but it has taken us years
to get it right. I didn't sleep much last night :)
(This used to be commit cc9e007cdf)
damn, this one is bad.
started, at least two days ago, to add an authentication mechanism to
the smbd<->msrpc redirector/relay, such that sufficient unix / nt
information could be transferred across the unix socket to do a
become_user() on the other side of the socket.
it is necessary that the msrpc daemon inherit the same unix and nt
credentials as the smbd process from which it was spawned, until
such time as the msrpc daemon receives an authentication request
of its own, whereupon the msrpc daemon is responsible for authenticating
the new credentials and doing yet another become_user() etc sequence.
(This used to be commit 30c7fdd6ef)
ideas from ssh-agent.
the intent is to be able to share smb sessions using cli_net_use_add()
across multiple processes, where one process knows the target server
name, user name and domain, but not the smb password.
(This used to be commit 294b653f2e)
verified that lsaquery, lsalookupsids work, and found some bugs in the
parameters of these commands :-)
soo... we now have an lsa_* api that has the same arguments as the nt
Lsa* api! cool!
the only significant coding difference is the introduction of a
user_credentials structure, containing user, domain, pass and ntlmssp
flags.
(This used to be commit 57bff6fe82)
have we got. and what data do we have. hmm.. i wonder what the NTLMv2
user session key can be... hmmm... weell.... there's some hidden data
here, generated from the user password that doesn't go over-the-wire,
so that's _got_ to be involved. and... that bit of data took a lot of
computation to produce, so it's probably _also_ involved... and md4 no, md5?
no, how about hmac_md5 yes let's try that one (the other's didn't work)
oh goodie, it worked!
i love it when this sort of thing happens. took all of fifteen minutes to
guess it. tried concatenating client and server challenges. tried
concatenating _random_ bits of client and server challenges. tried
md5 of the above. tried hmac_md5 of the above. eventually, it boils down
to this:
kr = MD4(NT#,username,domainname)
hmacntchal=hmac_md5(kr, nt server challenge)
sess_key = hmac_md5(kr, hmacntchal);
(This used to be commit ab174759cd)
LsaLookupSids etc from within SamrQueryAliasMembers, for example.
fnum is now a parameter to client functions. thanks to mike black
for starting the ball rolling.
(This used to be commit bee8f7fa6b)
client/client.c:
include/client.h: Added some debug messages that the old client used to
generate. These are needed to make scripts such as
'findsmb' work - there may be other changes to keep
backwards output compatibility. Do we need a -old-client-compat
argument ?
libsmb/clientgen.c: Fixed crash bug where malloc'ed data wasn't being
cleared - corrupted malloc chains.
web/swat.c: John's changes to get rid of "ghost" table entries.
(This used to be commit 3c45a3503e)
client/client.c:
client/clitar.c:
include/client.h:
smbwrapper/smbw_dir.c:
smbwrapper/smbw_stat.c:
smbwrapper/smbw.c:
lib/util.c: Converted all use of 'mode' to uint16.
smbd/quotas.c: Fixed stupid comment bug I put in there :-(.
printing/printing.c: Fix from J.F. to new code.
Jeremy.
(This used to be commit bacd3e9d20)
changes uses the unique index number from a SMB_QUERY_FILE_ALL_INFO to
try to provide inode numbers. If it is 0 then use the hash of the
filename as before.
(This used to be commit 2565ccf9de)
AS/U:
it returns dce/rpc "first" and "last" bits _clear_ in a bind/ack
response, when they should be set in a (small) packet. they also,
in the bind/ack do not set a secondary address string at all, so
we can't check against that...
Win95:
client-side dce/rpc code is a bit odd. it does a "WaitNamedPipeState"
and has slightly different pipe-naming (\PIPE\LANMAN is joined by
\PIPE\SRVSVC, \PIPE\WINREG etc whereas nt just has \PIPE\LANMAN
and \PIPE\).
Win95-USRMGR.EXE:
added LsaOpenPolicy (renamed existing to LsaOpenPolicy2).
added SamrConnect (renamed existing to SamrConnect2).
(This used to be commit a7fccd807b)
read/write requests for large reads. up to max_mux requests may be
outstanding. This gives _much_ better throughput and should allow
smbsh to saturate just about any network.
this is an implementation of the "fast SMB" method I described on the
CIFS list a couple of months back.
(This used to be commit c728d1c5d6)
uid_t, gid_t and vuid. Added sys_getgroups() to get
around the int * return problem. Set correct datatypes
for all uid, gid and vuid variables.
Jeremy.
(This used to be commit e570db46fc)
Changes to get Samba to compile cleanly with the IRIX compiler
with the options : -fullwarn -woff 1209,1174 (the -woff options
are to turn off warnings about unused function parameters and
controlling loop expressions being constants).
Split prototype generation as we hit a limit in IRIX nawk.
Removed "." code in smbd/filename.c (yet again :-).
Jeremy.
(This used to be commit e0567433bd)
and client.h. They are still included from smb.h so nothing should
change (or break) but this keeps the new definitions easier to
maintain. This is similar to what I did with ntdomain.h
Jeremy.
(This used to be commit 2831e5c9c4)
