IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This option adds a lot of unnecessary complexity to scripts.
Configuration should go in $CTDB_BASE, either directly or via a
symlink, so simplify by using the default location.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This was added for a vendor who decided not to use it. It is almost
certainly unused by anyone. If anyone really needs it then it is in
the git history.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the specified file or the default does not exist then log a
warning.
This is done in the takeover code to localise the handling of the
public addresses file. Soon the daemon command-line option will go
away and the takeover code will be replaced in the not too distant
future.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use environment variables for test-only options.
The setenv() can be dropped because the socket location is either the
compile-time default or the already set environment variable.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Event scripts live in a standard place.
For testing, CTDB_BASE is modified.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Event scripts live in a standard place.
For testing, CTDB_BASE is modified.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The check action should be there. It is used by 20.nfs_ganesha.check.
This reverts commit 4fa9026bbd.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This command is not used anywhere and also does not work for IPv6
addresses.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Instead of more generic SSH and EXTRA_SSH_OPTS.
Quietly drop reference to rsh in case it gives anyone ideas.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Some of these are only in a comment but git grep finds them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
... and update the output from various database query commands.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This allows to mix CTDB major versions in a single cluster.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed May 24 21:06:28 CEST 2017 on sn-devel-144
In particular, make them reflect the recent advice in ctdbd.conf(5)
about setting CTDB_NFS_CHECKS_DIR.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There is no "check" method. This was an error in the original
example.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
In ctdb/doc/examples/nfs-ganesha-callout line 216:
for node in `ls ${GANSTATEDIR}`; do
^-- SC2045: Iterating over ls output is fragile. Use globs.
^-- SC2006: Use $(..) instead of legacy `..`.
^-- SC2086: Double quote to prevent globbing and word splitting.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This call-out is referred to in the wiki as an example, so make it as
clean as possible.
All the changes here are trivial. There is still one failure, which
is slightly non-trivial, so it can be fixed in a separate commit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Fix some whitespace errors, reindent the whole script and wrap lines
where needed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Jan 20 18:47:04 CET 2017 on sn-devel-144
This changed to "ctdb gratarp" some time ago but the scripts were
never updated.
Fix the documentation for the ctdb tool too.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12512
Reported-by: Ralph Böhme <slow@samba.org>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The debug() function, which is the only user of this variable, is no
longer used. It is also dropped.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This has bit-rotted, at least for NFS. It can be fixed but it is
better to remove it because it adds a lot of unnecessary complexity.
Variable event_name becomes unused so remove it. Also remove
associated tests.
To continue to manage/unmanage services while CTDB is running:
* Start service by hand and then flag it as managed
* Mark service as unmanaged and shut it down by hand
In some cases CTDB does something fancy - e.g. start Samba under
"nice", so care is needed. One technique is to disable the
eventscript, mark as managed, run the startup event by hand and then
re-enable the eventscript.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Introduce a single new tunable IPAllocAlgorithm to set the IP
allocation algorithm. This defaults to 2 for LCP2 IP address
allocation.
Tunables LCP2PublicIPs and DeterministicIPs are obsolete.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These commands are now replaced with ctdb event ...
ctdb scriptstatus is maintained for backward compatibility.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This command covers all the commands to event daemon.
ctdb event run <event>
ctdb event status [<event>] [lastrun|lastfail|lastpass]
ctdb event script list
ctdb event script enable <script>
ctdb event script disable <script>
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This introduces a mutex helper called ctdb_etcd_lock, which allows CTDB to
use an existing etcd cluster to provide the functionality of a recovery lock
using the API outlined in ctdb/doc/cluster_mutex_helper.txt.
Signed-off-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): José A. Rivera <jarrpa@samba.org>
Autobuild-Date(master): Mon Dec 5 19:39:10 CET 2016 on sn-devel-144
The plan is to switch to Samba's (incompatible) debug levels, so just
expect CTDB users to use the symbolic name for the debug level.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Persistent databases are now always recovered by sequence number, so
there is no need for this tunable.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Nov 25 08:13:59 CET 2016 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12152
This makes the behaviour of "ctdb addip" similar to "ctdb delip".
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12123
Although this has been queued for a while, with changes to add stdin
support to the original ctdb tool, this came for free with the
replacement tool.
addtickle and deltickle also now have this feature. However, they're
internal commands and we're not adding new documentation for
internal/debug commands.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This drastically simplifies the code. "ctdb reloadips" behaves the
same, since it causes a takeover run immediately after IPs are
deleted. "ctdb delip" now needs to be followed with an explicit "ctdb
ipreallocate".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This avoids CTDB spending too much time processing multiple packets and
return to the event loop sooner.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This controls the maximum size of data ctdb will read from sockets at
a time.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
No preamble, just print keyword ENABLED or DISABLED. Fix the
documentation to reflect this and remove the text that is simply
wrong.
Also remove output from "ctdb enablemonitor" and "ctdb disablemonitor"
on success. This is just noise.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This limitation can be removed with a reasonable amount of effort. It
probably isn't worth doing until the public IP address configuration
is stored in a cluster-wide database. That seems like the right time
to change the API to handle the details that
CTDB_CONTROL_GET_PUBLIC_IPS doesn't currently retrieve.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Databases should never be thawed manually. A database recovery will
correctly thaw all databases. Otherwise there is a bug in the database
recovery.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This generates takeip-pre and releaseip-pre call-out events.
One use is to put NFS into grace before an IP is assigned to an
interface.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The recovery lock can not be reliably updated at run-time. If it
fails to update on some nodes then split-brain protection is gone and
there is no reasonable way to repair the situation. CTDB will have to
be restarted on all nodes. So, if this feature is being used to avoid
scheduling an outage then an outage will have to be scheduled just in
case!
To update the recovery lock, shut down CTDB on all nodes, reconfigure
the recovery lock and start CTDB again.
Those that *really* want to be able to change the recovery lock at
run-time can still do so. Set CTDB_RECOVERY_LOCK to point to a script
and this script can then be modified at run-time. However, please
don't report bugs if bad things happen...
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Sat May 14 03:06:05 CEST 2016 on sn-devel-144
Add CTDB_NFS_STATE_FS_TYPE and CTDB_NFS_STATE_MNT config options, show use in
nfs-ganesha-callout. Since the callout script is only an example, we
officially don't have default values for these.
Signed-off-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Comment typos and clarifications, erroneous variable names, corrected
pathnames, reorganizing variables, and squashing a few non-fatal
scripting errors.
Signed-off-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This currently fails exactly when it is needed: when there is a
dangling link pointing into an unmounted filesystem. This happens
because [ -e <dangling-link> ] returns false. The solution is simply
to remove that check.
Now the first condition in the "if" statement catches the backward
compatibility case where $GANRECDIR used to be a directory. It will
also catch other problems, such as if a file has been created in this
location. If nothing exists then it will silently succeed (due to
-f).
The second case catches a symlink pointing to the wrong place (e.g. in
an unmounted filesystem).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The underlying change is to allow the cluster mutex argstring to
optionally contain a helper command. When the argument string starts
with '!' then the first word is the helper command to run. This is
now the standard way of changing the helper from the default.
CTDB_CLUSTER_MUTEX_HELPER show now only be used to change the location
of the default helper when testing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the reclock is set then print it, otherwise print nothing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
LVS and NAT gateway support had bit-rotted. We don't use any of these
in scripts/tests and we very much doubt anyone else uses them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Apr 25 10:34:47 CEST 2016 on sn-devel-144
This can list the different aspects of status: master, list, status.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
For "master", if there is a master then print the PNN, otherwise print
nothing.
For "list", print the PNN and IP addresses without a colon in between.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This simply calls out to the wrapper, so that commands are changed as
follows:
ctdb lvsmaster -> ctdb lvs master
ctdb lvs -> ctdb lvs list
This provides a simple, extensible interface and means that "ctdb lvs
status" is also available.
Unit tests are streamlined so that there is a single test for each
CTDB state. Each test does "master", "list" and "status" sub-tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To keep this commit comprehensible, 91.lvs and the CTDB CLI tool are
temporarily inconsistent. The tool will be made consistent in a
subsequent commit.
LVS now uses a configuration file specified by CTDB_LVS_NODES and
supports the same slave-only syntax as CTDB_NATGW_NODES. LVS also
uses new variable CTDB_LVS_PUBLIC_IFACE instead of
CTDB_PUBLIC_INTERFACE.
Update unit tests and documentation.
Note that the --lvs and --single-public-ip daemon options are no
longer used. These will be removed and relevant documentation
updated in a subsequent commit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This will be used to limit the size of record buffer sent in newer
controls for recovery and existing controls for vacuuming.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This was a workaround for trying to ensure public IP addresses are
properly rebalanced after running "ctdb addip" on multiple nodes.
"ctdb reloadips" is a better solution.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is undocumented and is not needed. It was a workaround for
trying to ensure public IP addresses are properly rebalanced after
running "ctdb addip" on multiple nodes. "ctdb reloadips" is a better
solution.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To keep this commit comprehensible, 11.natgw and the CTDB CLI tool are
temporarily inconsistent. The tool will be made consistent in a
subsequent commit.
ctdb_natgw_slave_only() is reimplemented to check for the option in
the appropriate line in $CTDB_NATGW_NODES.
Update unit tests and documentation.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This has always been the case. Now it is documented and enforced.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Move information about TCP connection tracking and resetting into
ctdb.7.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This only applies to monitor events so renaming clarifies this.
Note that this change is not backward compatible. Users with
CTDB_SET_EventScriptTimeoutCount=<n>
in their configuration will get failures when starting CTDB but the
cause will be clearly logged.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* The defaults for EventScriptTimeout and EventScriptTimeoutCount are
wrong.
* EventScriptTimeout is the total time for all enabled scripts that
are run for an event, not a single event script.
* EventScriptTimeoutCount only applies to monitor events.
* EventScriptUnhealthyOnTimeout is obsolete, so remove it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The tmpfs is mounted and unmounted by ctdbd_wrapper. Format is
CTDB_DBDIR=tmpfs:<tmpfs-options>. The only default for the tmpfs is
mode=700 - to override, specify a different value in <tmpfs-options>.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Nov 9 10:58:32 CET 2015 on sn-devel-104
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Nov 6 13:43:45 CET 2015 on sn-devel-104
This is deprecated. For many commands it doesn't make sense. Instead
of "ctdb ip -n all" use "ctdb ip all".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Should be an IP address not a filename.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Sat Sep 19 16:39:23 CEST 2015 on sn-devel-104
These still say /tmp/ctdb.socket, which is very out-dated. Update
with build-time location.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
In this case: ctdbd_wrapper, onnode, ctdb_diagnostics, ctdb.sudoers.
Set sensible defaults from configure options.
Update documentation to match, trying to fix up anything that has been
missed before.
The onnode unit tests need a symlink to the functions file.
The simple integration tests need to set CTDB_BASE and also
need symlinks to functions/nodes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
fixup
Signed-off-by: Martin Schwenke <martin@meltin.net>
This variable points to /etc/ by default.
This distinguishes it from the different variable from wscript, which
points to /etc/ctdb/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Clearly identifies where all state files from scripts should go and
allows that location to be easily changed. This patch should not
change any behaviour (outside of eventscript unit tests, where a
clearer location is now used).
CTDB_VARDIR should no longer be overridden. Continue to set
CTDB_DBDIR and similar to override database location in unit tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Have wscript do path substitution.
No need to export this and CTDB_ETCDIR here, but test scripts will
still need to do so.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Format instructions for adding/deleting nodes with appropriate XML and
simplify wording.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Always check filesystem usage for the database directories.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Sat Aug 29 20:08:48 CEST 2015 on sn-devel-104
CTDB should warn by default if too much system memory or swap is used.
The tests have also been tweaked. In particular, the filesystem-only
tests need to initialise the memory information to avoid errors where
meminfo isn't set.
Document the defaults, warning against disabling them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
New variables CTDB_MONITOR_MEMORY_USAGE and CTDB_MONITOR_SWAP_USAGE.
Both take a pair of <warn_threshold>:<unhealthy_threshold> where each
theshold is specified as a percentage.
This adds a callout to check_thresholds() that is run when the
unhealthy threshold is reached.
Add some combination tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB_MONITOR_FREE_MEMORY and CTDB_MONITOR_FREE_MEMORY_WARN are now
percentages that specify thresholds of acceptable memory usage.
Memory/swap usage in tests also specified as percentages.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This allows both errors (i.e. unhealthy) and warnings for different
thresholds. It replaces CTDB_CHECK_FS_USE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Will put all the system monitoring in here, simplifying 00.ctdb.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
We don't expect to maintain an up-to-date copy. NFS Ganesha team
might provide patches.
Also move the Ganesha .check file
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This adds new configuration variable CTDB_RPCINFO_LOCALHOST6.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is now handled by passing the desired number of threads to the
command specified in the dump_stuck_threads variable in .check files.
Remove unused function nfs_dump_some_threads().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This isn't a straightforward move of code from 60.ganesha to the
callout. Simplifications have been made to allow better
interoperation with the new NFS checking logic.
The following configuration variables have been removed:
CTDB_GANESHA_REC_SUBDIR
Edit NFS ganesha callout to change this location
CTDB_NFS_SERVER_MODE, NFS_SERVER_MODE
Use CTDB_NFS_CALLOUT instead
CTDB_NFS_SKIP_KNFSD_ALIVE_CHECK, CTDB_SKIP_GANESHA_NFSD_CHECK
Disable the corresponding .check file instead
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is now always enabled. If nfsd thread monitoring is not required
then make CTDB_NFS_CALLOUT point to a wrapper around
nfs-linux-kernel-callout that does not implement "monitor-post".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
For use with DisableIPFailover=1.
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed May 13 09:27:36 CEST 2015 on sn-devel-104
Required when automatic address detection can not be used. This can
be the case when running multiple ctdbd daemons/nodes on the same
physical host (usually for testing), using InfiniBand for the private
network or on Linux when sysctl net.ipv4.ip_nonlocal_bind=1.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Apr 27 06:10:08 CEST 2015 on sn-devel-104
There are valid real-world use cases. Improve the documentation.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This was true for the daemon until commit
b4589b954e.
Defaulting to ERR in the ctdb CLI tool encourages logging notices at
ERR level, so default to NOTICE instead.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It is pointless having a recovery lock but not sanity checking that it
is working. Also, the logic that uses this tunable is confusing. In
some places the recovery lock is released unnecessarily because the
tunable isn't set.
Simplify the logic by assuming that if a recovery lock is specified
then it should be verified.
Update documentation that references this tunable.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
In the CTDB CLI tool source code and the documentation example.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To support this, update printm() to replace ':' in format string with
options.machineseparator, which is a string but must contain a single
character.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are parentheses missing that stop the default pattern from
matching commands with trailing garbage (e.g. "exportfs.orig").
A careful check of POSIX (and running GNU sed with --posix) suggests
that "\|" isn't a supported way of specifying alternation in a regular
expression. Therefore, it is clearer to switch to extended regular
expressions so that this has a chance of being portable (even though
the point is to print /proc/<pid>/stack, which only works on Linux).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Nov 18 06:37:45 CET 2014 on sn-devel-104
Some implementations may not understand RC3164 format messages on the
UDP socket, so add support for RFC5424 message format.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This has most of the advantages of the old logd with none of the
complexity of the extra process. There are several good syslog
implementations that can listen on the UDP port.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Remove --logfile and --syslog daemon options and replace with
--logging.
Modularise and clean up logging initialisation code. The
initialisation API includes an app_name argument that is currently
unused - this will be used in extensions to the syslog backend.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Internally map them to DEBUG_ERR to limit code churn.
This reduces the unwieldy number of debug levels used by CTDB. ALERT
and CRIT aren't of much use as separate errors, since everything from
ERR up should always be logged. In future just ERR can be used.
This also improves compatibility with Samba's debug.c system priority
mapping.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It isn't used and shouldn't be. CTDB can't make the system unusable.
Update associated test to ensure that EMERG isn't attempted. Actually
test all remaining debug levels and modernise the test a bit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
As far as we know, nobody uses this and it just complicates the
logging subsystem.
Remove all ringbuffer code and documentation. Update the local
daemons startup code correspondingly.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
