IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When monitoring an RPC service, the rpcinfo command might time out
even though the service is making progress. In this case, it is just
slow, so counting the timeout as a failure and potentially restarting
the service will not help. The problem is determining if a service is
making progress.
Add a new NFS checks service_stats_command. This command is intended
to run a statistics command. The output is naively compared using
cmp(1). If the output changes then rpcinfo failures are converted to
successes.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is way more complicated than I would like but, as per the
comment, this is due to complexities in the way public IPs work. The
main consumer will be statd-callout, which will then be able to run as
a non-root user.
Also generate the cache file in test code, whenever the PNN is set.
However, this can cause "ctdb ip" to generate a fake IP layout before
public IPs are setup. So, have the "ctdb ip" stub generate the IP
layout every time it is run to avoid it being stale.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
All of the other uses of ctdb.tdb are in statd-callout.
New variable statd_callout_db makes it easy to change the database
name in future, perhaps even allowing it to be configurable.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Tweak some lines to avoid overflowing 80 columns.
Best viewed with "git show -w".
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Using xargs with sort -u to de-duplicate this list was my idea and
causes a couple of things to go wrong. The use of xargs causes
double-quotes to be lost. The resulting $public_ifaces value also
contains newlines. The newlines could be removed with an additional
xargs at the end of the pipeline... but that would add an extra level
of quote stripping.
I have unsuccessfully tried to find an alternative, but still elegant,
command pipeline that de-duplicates the list, while maintaining
quoting.
So, just drop the de-duplication.
This might make interface_ifindex_exists_with_options() slightly less
efficient. However, that function walks the whole list, only
terminating early when a match is found on both interface and options,
so at least it will be correct.
Include an extra testcase.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Thu Apr 18 09:08:34 UTC 2024 on atb-devel-224
get_all_interfaces() functions gets all names for all public interfaces.
However name is misleading. Thus renamed it to get_public_ifaces() and
moved it under functions.
Signed-off-by: Vinit Agnihotri <vagnihotri@ddn.com>
Reviewed-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
If someone wants to enable the witness service
samba-dcerpcd needs to be started as standalone service
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15577
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
We can easily monitor if the service is running at all,
that better than no monitoring at all...
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15577
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
This effectively provides simple testing for the threshold-based
approach.
Add new script option CTDB_VSFTPD_MONITOR_THRESHOLDS.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Oct 3 04:53:38 UTC 2023 on atb-devel-224
Loading tunables is now done in ctdbd, so find another example for the
"setup" event.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
New in ShellCheck 0.9.0:
SC2317 (info): Command appears to be unreachable. Check usage (or ignore if invoked indirectly).
Also:
SC2086 (info): Double quote to prevent globbing and word splitting.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
When testparm processes the output of "testparm -v" (which includes
default values) it appears to do global checks (or some other sort of
initialisation logic) for all specified values. This includes a DNS
lookup for the node's hostname, as a side-effect of a libldap
ldap_set_option() call when processing "ldap debug level". If DNS
servers are down then this can induce timeouts, possibly resulting in
monitor timeouts.
Avoid this by using sed to extract configuration values from the
testparm cache file.
This is already shown to work when retrieving share paths, where
testparm is basically used as cat. Update the sed pattern to avoid
matching empty values on the right-hand side of the equals ('=') -
this avoids the default empty path value (and "smb ports" never has an
empty value).
Corresponding test changes:
* 50.samba.monitor.111.sh no longer expects a failure from being
unable to set smb ports, since testparm is no longer used in that
code path.
* smb ports needs to be set in fake smb.conf so it is in the default
output and can be extracted using sed.
* Although testparm --parameter-name is no longer used in
50.samba.script, update the stub implementation (in case it is ever
used again) to extract from fake smb.conf, since "smb ports" is now
set there. The change from $parameter to $param allows a long line
to stay below 80 columns.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Tue Feb 14 08:43:53 UTC 2023 on atb-devel-224
The list changed back to space-separated in commit
93448f4be9, so simplify the code a
little.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
For example:
In /home/martins/samba/samba/ctdb/tools/onnode line 304:
[ "$nodes" != "${nodes%[ ${nl}]*}" ] && verbose=true
^---^ SC2295 (info): Expansions inside ${..} need to be quoted separately, otherwise they match as patterns.
Did you mean:
[ "$nodes" != "${nodes%[ "${nl}"]*}" ] && verbose=true
For more information:
https://www.shellcheck.net/wiki/SC2295 -- Expansions inside ${..} need to b...
Who knew? Thanks ShellCheck!
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
For memory usage, no need to dump all of this data on every failed
monitor event. The first call will be enough to diagnose the problem.
The node will then go unhealthy, drop clients and memory usage should
then drop.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Jul 22 07:32:54 UTC 2022 on sn-devel-184
If filesystem usage exceeds the unhealthy threshold then checking
memory usage checking is not done. Always do them both.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use printf to allow easier line breaks and use some early returns.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
About to modify this file, so reformat first as per recent Samba
convention.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
SC2164 (warning): Use 'cd ... || exit' or 'cd ... || return' in case cd fails.
A problem can only occur if /etc/ctdb/ or an important subdirectory is
removed, which means the script itself would not be found. Use && to
silence ShellCheck.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is functionally the same as ctdb_release_all_ips().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Note that order of sed expressions matters: the expression to delete
comment lines must come first as the second expression would transform
# comment
to
comment
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14826
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Instead of master/slave.
Nearly all of these are simple textual substitutions, which preserve
the case of the original. A couple of minor cleanups were made in the
documentation (such as "LVSMASTER" -> "LVS leader").
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Instead of master/slave.
Nearly all of these are simple textual substitutions, which preserve
the case of the original.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Till now 50.samba script was based on RHEL versions <=6 where we didn't
have separate start up script for nmb and smbd used to start nmbd when
required. Now that nmbd has its own start up script named "nmb" it is
reasonable to have "nmb" as default value for CTDB_SERVICE_NMB inside
new 48.netbios ctdb script.
Signed-off-by: Anoop C S <anoopcs@redhat.com>
Reviewed-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This change basically moves out nmbd references from 50.samba script to
a new 48.netbios script. Accordingly ctdb test scripts are tweaked to
cope with newly added script.
Signed-off-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This covers the following:
SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
POSIX agrees that -a and -o should not be used:
https://pubs.opengroup.org/onlinepubs/9699919799/utilities/test.html
Fixing these doesn't cause much churn.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Commit ea7708d8c7 simplified
01.reclock.script and removed include of functions file which is
required for setting CTDB_HELPER_BINDIR and for die() function.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
The "init" event is only run once so don't bother caching the
configured value of the recovery lock. Add some extra error checking.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Jul 26 04:52:04 UTC 2019 on sn-devel-184
CTDB's system memory monitoring in 05.system.script monitors both main
memory and swap. The swap monitoring was originally based on
the (possibly incorrect, see below) idea that swap space stacks on top
of main memory, so that when a system starts filling swap space then
this is supposed to be a good sign that the system is running out of
memory. Additionally, performance on a Linux system tends to be
destroyed by the I/O associated with a lot of swapping to spinning
disks.
However, some platforms default to creating only 4GB of swap space
even when there is 128GB of main memory. With such a small swap to
main memory ratio, memory pressure can force swap to be nearly full
even when a significant amount of main memory is still available and
the system is performing well. This suggests that checking swap
utilisation might be less than useful in many circumstances.
So, remove the separate swap space checking and change the memory
check to cover the total of main memory and swap space.
Test function set_mem_usage() still takes an argument for each of main
memory and swap space utilisation. For simplicity, the same number is
now passed twice to make the intended results comprehensible. This
could be changed later.
A couple of tests are cleaned up to no longer use hard-coded
/proc/meminfo and ps output.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Preparation for recommending configuration for each script next to the
actual script.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is the initial location that will be used by the new
multi-component aware event daemon.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
