IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- add an idtree_limit to limit the max VUID we give the clients
it's UINT16_MAX (0xffff) for the SMB protocol
- add auth_time to the smbsrv_session statistics
- use the session_info as marker for finished and non-finished
session setups
metze
them
- add a idtree_limit to the tcons substructure of smbsrv_connection
this controls what the highest TID is we give away to the client
it's UINT16_MAX (0xFFFF) for the SMB protocol
metze
authentication. This pulls the creating of the keytab back to the
credentials code, and removes the special case of 'use keberos keytab
= yes' for now.
This allows (and requires) the callers to specify the credentials for
the server credentails to GENSEC. This allows kpasswdd (soon to be
added) to use a different set of kerberos credentials.
The 'use kerberos keytab' code will be moved into the credentials
layer, as the layers below now expect a keytab.
We also now allow for the old secret to be stored into the
credentials, allowing service password changes.
Andrew Bartlett
set to the internal ldap server over loopback. The following happened:
- DCERPC_AUTH3 request
- auth requests calls ldb
- ldb calls ldap
- ldap calls our internal ldap server, triggering events
- samrConnect from client
- connect refused
- SMBclose from client
- causes dcerpc_pipe to be destroyed
- AUTH3 continues
- dies on freed pipe
I chose this solution as it provides a guarantee that backends only have to think about
async issues when they mark a request async. When they don't, this code guarantees that
a second request won't happen on the same connection while processing the first one
behaviour on session setups, and because we no longer need do deal
with the linked list as much, the code is much simpiler too.
We may be able to compleatly remove the tid and vuid linked lists, but
I need to check.
This patch also tries to clean up the VUID handling and session setups
in general. To avoid security issues, we now have a distinction
between VUIDs allocated for the session setup (to tie togeather the
multiple round trips) and those used after authentication.
Andrew Bartlett
servers in smbd. The old code still contained a fairly bit of legacy
from the time when smbd was only handling SMB connection. The new code
gets rid of all of the smb_server specific code in smbd/, and creates
a much simpler infrastructures for new server code.
Major changes include:
- simplified the process model code a lot.
- got rid of the top level server and service structures
completely. The top level context is now the event_context. This
got rid of service.h and server.h completely (they were the most
confusing parts of the old code)
- added service_stream.[ch] for the helper functions that are
specific to stream type services (services that handle streams, and
use a logically separate process per connection)
- got rid of the builtin idle_handler code in the service logic, as
none of the servers were using it, and it can easily be handled by
a server in future by adding its own timed_event to the event
context.
- fixed some major memory leaks in the rpc server code.
- added registration of servers, rather than hard coding our list of
possible servers. This allows for servers as modules in the future.
- temporarily disabled the winbind code until I add the helper
functions for that type of server
- added error checking on service startup. If a configured server
fails to startup then smbd doesn't startup.
- cleaned up the command line handling in smbd, removing unused options
- stream_socket services
the smb, ldap and rpc service which sets up a srtam socket end then
waits for connections
and
- task services
which this you can create a seperate task that do something
(this is also going through the process_model subsystem
so with -M standard a new process for this created
with -M thread a new thread ...
I'll add datagram services later when we whave support for datagram sockets in lib/socket/
see the next commit as an example for service_task's
metze
maintaining the async nature of the server. This is done with a
SMBtrans request queue for partially completed requests.
The smb signing issues with this get a little tricky, but it now seems
to work fine
- get rid of req->mid, as it isn't a safe value to use to match
requests in the server (it is safe in the client code, as we choose
the mid, but in the server we can't rely on other clients to choose
the mid carefully)
the idea is that a passthru module can use ntvfs_async_state_push() before
calling ntvfs_next_*() and in the _send function it calls
ntvfs_async_state_pop() and then call the upper layer send_fn itself
- ntvfs_nbench is now fully async
- the ntvfs_map_*() functions and the trans(2) mapping functions are not converted yet
metze
preparation for the full share modes and ntcreatex code that I am
working on.
highlights include:
- changed the way a backend determines if it is allowed to process a
request asynchronously. The previous method of looking at the
send_fn caused problems when an intermediate ntvfs module disabled
it, and the caller then wanted to finished processing using this
function. The new method is a REQ_CONTROL_MAY_ASYNC flag in
req->control_flags, which is also a bit easier to read
- fixed 2 bugs in the readbraw server code. One related to trying to
answer a readbraw with smb signing (which can't work, and crashed
our signing code), the second related to error handling, which
attempted to send a normal SMB error packet, when readbraw must
send a 0 read reply (as it has no header)
- added several more ntvfs_generic.c generic mapping functions. This
means that backends no longer need to implement such esoteric
functions as SMBwriteunlock() if they don't want to. The backend
can just request the mapping layer turn it into a write followed by
an unlock. This makes the backends considerably simpler as they
only need to implement one style of each function for lock, read,
write, open etc, rather than the full host of functions that SMB
provides. A backend can still choose to implement them
individually, of course, and the CIFS backend does that.
- simplified the generic structures to make them identical to the
principal call for several common SMB calls (such as
RAW_WRITE_GENERIC now being an alias for RAW_WRITE_WRITEX).
- started rewriting the pvfs_open() code in preparation for the full
ntcreatex semantics.
- in pvfs_open and ipc_open, initially allocate the open file
structure as a child of the request, so on error we don't need to
clean up. Then when we are going to succeed the open steal the
pointer into the long term backend context. This makes for much
simpler error handling (and fixes some bugs)
- use a destructor in the ipc backend to make sure that everthing is
cleaned up on receive error conditions.
- switched the ipc backend to using idtree for fnum allocation
- in the ntvfs_generic mapping routines, use a allocated secondary
structure not a stack structure to ensure the request pointer
remains valid even if the backend replies async.
- the stacking of modules
- finding the modules private data
- hide the ntvfs details from the calling layer
- I set NTVFS_INTERFACE_VERSION 0 till we are closer to release
(because we need to solve some async problems with the module stacking)
metze
server code. This fixes a number of memory leaks I found when testing
with valgrind and smbtorture, as the cascading effect of a
talloc_free() ensures that anything derived from the top level object
is destroyed on disconnect.
ntvfs handler = nbench posix
and the nbench pass-thru module will be called before the posix
module. The chaining logic is now much saner, and less racy, with each
level in the chain getting its own private pointer rather than relying
on save/restore logic in the pass-thru module.
The only pass-thru module we have at the moment is the nbench one
(which records all traffic in a nbench compatibe format), but I plan
on soon writing a "unixuid" pass-thru module that will implement the
setegid()/setgroups()/seteuid() logic for standard posix uid
handling. This separation of the posix backend from the uid handling
should simplify the code, and make development easier.
I also modified the nbench module so it can do multiple chaining, so
if you want to you can do:
ntvfs module = nbench nbench posix
and it will save 2 copies of the log file in /tmp. This is really only
useful for testing at the moment until we have more than one pass-thru
module.
like it in the mainline code (outside the smb.conf magic).
We will need to have a more useful 'helper' routine for this, but for
now we at least get a reliable IP address.
Also remove the unused 'socket' structure in the smb server - it seems
to have been replaced by the socket library.
Andrew Bartlett
- This causes our client and server code to use the same core code,
with the same debugs etc.
- In turn, this will allow the 'mandetory/fallback' signing algorithms
to be shared, and only written once.
Updates to the SPNEGO code
- Don't wrap an empty token to the server, if we are actually already finished.
Andrew Bartlett
to a struct smbsrv_session that the same as cli_session for the client
we need a gensec_security pointer there
(spnego support will follow)
prefix some related functions with smbsrv_
metze
the idea is to have services as modules (smb, dcerpc, swat, ...)
the process_model don't know about the service it self anymore.
TODO:
- the smbsrv should use the smbsrv_send function
- the service subsystem init should be done like for other modules
- we need to have a generic socket subsystem, which handle stream, datagram,
and virtuell other sockets( e.g. for the ntvfs_ipc module to connect to the dcerpc server
, or for smb or dcerpc or whatever to connect to a server wide auth service)
- and other fixes...
NOTE: process model pthread seems to be broken( but also before this patch!)
metze
