IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This will make it possible to run them in parallel (hopefully on shared
gitlab runners).
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
These will be used to move the build stages from private gitlab runner
jobs to shared runners.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This means we avoid a lot of cpu usage for the build.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This will make it possible to split build and test stages
in the next steps.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
For now it keeps being the same as self.test_source_dir, but that will
change soon.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This will make further reconstruction easier.
Use 'git show -w' to see the minimal diff.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
We do start for almost all jobs, just samba-ctdb keeps passing it via
configure in order to have a regression test for it.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This works for all cases even if the builder runs in a subdirectory.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
The will make it easier to add more meta data properties to task
definitions.
Use 'git show -w' to see the minimal diff.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
It's not useful to generate a python backtrace from within the cleanup code.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Wed Jan 27 18:17:17 UTC 2021 on sn-devel-184
That also tries to re-add write permissions before removing.
In future we'll have jobs changing there directory to read-only.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
The key is that we only enable it for just one task.
I plan to restructure the autobuild tasks, but 'samba-ctdb'
will stay the way it works currently.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
MIMEText(text, 'plain', 'utf-8') encodes the text into
base64 and adds 'Content-Transfer-Encoding: base64' header.
Signed-off-by: SATOH Fumiyasu <fumiyas@osstech.co.jp>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Mon Nov 16 22:43:35 UTC 2020 on sn-devel-184
It is much harder to determine why we get messages like
Step #6: Error occured while running fuzz_reg_parse:
Step #6: /workspace/out/coverage/fuzz_reg_parse: error while loading shared libraries: libavahi-common.so.3: cannot open shared object file: No such file or directory
instead this detects the failure to use RPATH (which is
strictly required instead of the modern RUNPATH)
otherwise.
We do this by creating a new build_samba.sh after renaming
build_samba.sh to do_build.sh because this is what oss-fuzz
runs, meaning we don't need to coordinate a MR there as well.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This includes a revert of commit e60df21499.
We strictly require RPATH, not the modern RUNPATH for the behaviour
we need in oss-fuzz, which is that not just the first line of dependencies
but the full set of libraries used by the program are looked for in the
'$ORIGIN/lib' directory.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Douglas Bagnall <dbagnall@samba.org>
Autobuild-Date(master): Thu Oct 22 14:10:04 UTC 2020 on sn-devel-184
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Oct 16 18:30:18 UTC 2020 on sn-devel-184
This avoids another full compile cycle.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Running a "make install" involves a full re-link which takes quite some time
we really only need to test this in a couple of basic combinations, so remove
from a few more targets.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This might help our CI runners get a ccache hit by keeping the path constant.
Otherwise, we only get a good ccache hit rate if the docker container gives
us the same pid each time.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
We expect these will complete in under an hour and reduce the number of
parallel jobs. Hopefully there will be some ccache hits between these
as well.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
For now at least we do not have any in third_party.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: David Mulder <dmulder@suse.com>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Aug 21 00:12:52 UTC 2020 on sn-devel-184
We did not check we could actually build the HTML of the
Samba Developers guide and HTML of the manpages previously.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Jun 10 07:11:59 UTC 2020 on sn-devel-184
This job is already quite long and these tests are unlikely
to vary between hosts or under the -O3 compile
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Adjust the existing autobuild jobs that currently include/exclude
test env fileserver to also use fileserver_smb1.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
This is a relatively new test environment that only uses very few tests
yet. Skip the env name rename dance for this env, but someone has to convert the
tests later on.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
These commands are just there as hints to debug possible problems.
In order to support autobuild.py on non-linux platforms we should
just ignore errors here.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Thu Apr 2 07:36:07 UTC 2020 on sn-devel-184
On platforms like FreeBSD 12 cp doesn't accept the long options,
using the one letter options works there and keeps working on Linux
as well.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
.git is not always a directory, with 'git worktree' it's a file.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This saves CI resources (20mins build time) at the expense of making
the samba-nt4 job take 45min (5 min longer).
The new maximum job time is 1:15 by samba-o3 on the different hosts.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Mon Mar 23 14:45:59 UTC 2020 on sn-devel-184
This avoids a full compile of Samba just to test Kerberos with a system Heimdal
while still providing an environment to test other fileserver features.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Building an AD DC while setting --without-ads makes no sense and just wastes compile time on our build hosts.
To allow samba-nt4 to build --without-ad-dc we set rpc.spoolss.notify
(which is built on the NTVFS fileserver for the callbacks) to run in
the ad_member environment rather than nt4_dc and ad_dc.
This is also just more realistic in any case.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This includes tests which should make sure that certain code is not
optimized away, like memset_s().
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Mon Mar 9 23:42:26 UTC 2020 on sn-devel-184
Speed up the build a bit
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Wed Feb 19 11:28:56 UTC 2020 on sn-devel-184
