IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
filename_convert() handles mangled names just fine, so we don't
need to split the last component and check for mangle.
Now we don't take wildcard names this is not needed. This was the
last caller of split_fname_dir_mask(), so ifdef it out.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
All callers have gone through filename_convert(), which has
already called check_name() on the destination.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
No longer used. filename_convert() already handles mangled
names just fine, so we don't need this logic.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
One parameter needs changing position. The logic inside unlink_internals()
is no longer needed if it doesn't accept wildcards. filename_convert()
already handles mangled names just fine, so we don't need this logic.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Now we don't use wildcards when calling in unlink_internals()
the logic inside it serves no purpose and can be replaced with
a direct call to do_unlink() (which we will rename to unlink_internals()).
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
source3/torture/torture.c:4309:17: error: ‘pname’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
4309 | printf("qfilename gave different name? [%s] [%s]\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4310 | fname, pname);
| ~~~~~~~~~~~~~
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Dec 11 00:25:46 UTC 2021 on sn-devel-184
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Fri Dec 10 14:52:54 UTC 2021 on sn-devel-184
This was only used in the prefork source3 rpc servers
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This is the big switch to use samba-dcerpcd for the RPC services in
source3/. It is a pretty big and unordered patch, but I don't see a
good way to split this up into more manageable pieces without
sacrificing bisectability even more. Probably I could cut out a few
small ones, but a major architechtural switch like this will always be
messy.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
These are rpcd_* binaries.
rpcd_classic collects everything that's not specific
Changes the epmapper to read the epmdb.tdb, which will make the
epmapper tests non-bisectable until the switch is done.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Even internal pipes have a small cost, external ones will block a
process from exiting soon.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Will be used later in client tools.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
is_known_pipename() will be removed soon
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
A future patch will remove the PRINTING dependency from smbd, but in
delete_and_reload_printers() we still reference it.
Maybe at some later stage we can remove reload_printers() overall, we
don't really need to load the full printer list into every smbd. All
we need is to load them on-demand for explicit listing functions, but
there we can throw them away again. And when someone connects to the
printer, we can also load them on demand.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Get status information out of samba-dcerpcd and its RPC helpers.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Helper routine to connect to bind to a locally started rpcd_* process's
rpc interface.
Based upon local_np_connect() to start samba-dcerpcd on demand if it's
not there, designed to replace our internal RPC interfaces where the
RPC server runs in the same process. This will be called from winbindd_cm.c
and source3/rpc_server/rpc_ncacn_np.c
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This is the generic code that becomes the
template that all rpcd_* instances that
serve DCERPC can use to provide services to samba-dcerpcd.
The external entry point is:
rpc_worker_main() which takes an argc/argv list
and two functions:
get_interfaces() - List all interfaces that this server provides
get_servers() - Provide the RPC server implementations
Each rpcd_* service needs only to provide
the implementations of get_interfaces() and get_servers()
and call rpc_worker_main() from their main() function
to provide services that can be connected to from samba-dcerpcd.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This will be used for internal pipe connects. It starts samba_dcerpc
on demand if it's not there yet, so long as smb.conf [global]
has "rpc start on demand helpers = true" (the default setting).
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Central dispatcher for incoming RPC requests, supported by helpers
that implement RPC services.
Upon startup, it asks all helpers which interfaces and endpoints to
listen on so it doesn't interfere with the samba binary when we're
configured as an Active Directory Domain Controller, then samba-dcerpcd
opens the relevant sockets. Once clients connect, start required helpers
and tell them to shut down once idle for a while.
Can be started as a full standalone daemon without smbd involved or as
a helper daemon started on demand by smbd or winbind or other local
processes trying to connect to a named pipe based RPC service.
NB. To start as a standalone daemon the smb.conf [global] option
"rpc start on demand helpers = false" must be set.
By default "rpc start on demand helpers = true"
in order to allow upgrades without needing an smb.conf change.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
If "true" allow smbd and winbindd to spawn samba-dcerpcd
as a named pipe helper. Allows upgrade without any change
to smb.conf. If samba-dcerpcd is run as a daemon this
must be set to "false".
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
MSG_RPC_DUMP_STATUS will be like pool-usage carrying a file descriptor to
report status to, the other two are described in rpc_host.idl.
NOALIGN on rpc_worker_status: This makes it easier to count bytes to
push into a static buffer.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This is used by the helpers of samba-dcerpcd: When accepting a DCERPC
client, normally the server engine would read the initial bind
packet. In case of samba-dcerpcd the bind packet will already be read
from the socket, so we need to inject it into the rpc server engine
externally.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
[MS-BKRP] says it SHOULD listen here. In the ad dc, this conflicts
with smbd's srv_ntsvcs_nt.c listening also on nt ntsvcs unix domain
socket. Because "samba" starts smbd after itself, smbd takes over the
socket anyway, backupkey can't have been reached over this transport.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
We'll need to set custom callbacks on source3's global_dcesrv_ctx,
which right now is deeply embedded. Once we have everything more
nicely layered, this can go again.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This does not have to go to syslog by default always, it might be just
a daemon not listening.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Once we do registry access via a pipe into a different process, a
registry client won't be able to directly do registry transactions
anymore. In this case, I argue that doing this in a transactioned way
is overkill anyway. svcctl_init_winreg() just sets up some registry
keys, and if that leaves behind some stale entries if it fails
somewhere in the middle, it does not really matter because the only
one looking at these registry keys is the svcctl service, and that
only starts up if the init function was successfully run.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This is a become_root user callout that I have never seen in use in
more than 20 years of Samba. Why disable now? In the next commit I
need to make a change to initializing the registry values for
services, the svcctl service won't be able to do registry transactions
anymore. I'm not sure that going without transactions is 100% safe in
all failure cases, so I decided to propose disabling the problematic
code that might lead to security issues.
One fix might be to add a lot more validation code to
_svcctl_OpenServiceW() to see whether the registry values underlying
the service are sane.
Yes, this is technical debt, but I would question that starting unix
daemons via DCERPC used at all out there.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
I was getting this failure:
[102(815)/143 at 10m59s] samba4.blackbox.net_ads_dns(ad_member:local)(ad_member:local)
UNEXPECTED(failure): samba4.blackbox.net_ads_dns(ad_member:local).Adding an unprivileged user(ad_member:local)
REASON: Exception: Exception: Could not add user unprivuser. Error setting password Incorrect net address
My preliminary analysis shows that the KRB5KRB_AP_ERR_BADADDR error
message is triggered by the libkrb5 client code. I have not yet shown
this to happen with pure libkrb5, but my theory is the following:
k5_privsafe_check_addrs() fails under the following circumstances: The
kpasswd server is contacted on IPv4 and is slow to reply. After
waiting a bit, libkrb5 also tries to contact kpasswd on
IPv6. kpasswd_sendto_msg_callback() for the IPv6 request changes the
authentication context's local_addr to IPv6. Then the IPv4 request is
replied to, and then k5_privsafe_check_addrs() bails on the address
family in ac->local_addr (IPv6) vs the one received and via the IPv4
connection.
libkrb5's src/lib/krb5/os/changepw.c has this comment:
/*
* TBD: Does this tamper w/ the auth context in such a way
* to break us? Yes - provide 1 per conn-state / host...
*/
I think we're hit by this.
This patch hacks around the situation by priming the kpasswd server
without error checking. If the initial v4 request is quick enough
because the kpasswd server is already started up properly, everything
works flawlessly.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Eventually, this new mechanism might replace the ncalrpc_as_system mechanism: I
think with this we're much more flexible and even more secure: We rely on the
direct permissions on "np/" and don't have to pretend that the local client
came from a file on /root. We are more flexible because with this mechanism we
can easily fake arbitrary tokens and play with session keys.
However, this would require that the source4 librpc code needs to learn about
this mechanism, which I was not able to complete.
The source3 rpc_server side of this will go away soon, so for now only
allow NCACN_NP there. The check in source4 will stay with us for a
while, so allow NCACN_NP and NCALRPC to be set remotely here. With
NCACN_NP (the case for a client to connect on a named pipe), protect
against accidentially connecting as system.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This will serve as a check to make sure that in particular a SAMR
client is really root. This is for example used in get_user_info_18()
handing out a machine password.
The unix domain sockets for NCACN_NP can only be contacted by root,
the "np\" subdirectory for those sockets is root/root 0700.
Connecting to such a socket is done in two situations: First, local
real root processes connecting and smbd on behalf of SMB clients
connecting to \\pipe\name, smbd does become_root() there. Via the
named_pipe_auth_req_info4 smbd hands over the SMB session information
that the RPC server blindly trusts. The session information (i.e. the
NT token) is heavily influenced by external sources like the KDC. It
is highly unlikely that we get a system token via SMB, but who knows,
this is information not fully controlled by smbd.
This is where this additional field in named_pipe_auth_req_info5 makes
a difference: This field is set to NCACN_NP by smbd's code, not
directly controlled by the clients. Other clients directly connecting
to a socket in "np\" is root anyway (only smbd can do become_root())
and can set this field to NCALRPC.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Once RPC services are done by individual processes, we need to avoid
recursion between processes:
Any RPC server process will be able to serve multiple client requests
simultaneously, but each request is served in a single-threaded
blocking manner.
For example the netlogon RPC service needs to ask samr for
something. The netlogon->samr connection will initially be handled by
a central dispatcher assigning clients to processes. This dispatcher
needs to know that this connection can't end up in the same process
that originated the request.
With this flag an RPC client can request a samr server process that
exclusively serves its own requests and that will not serve anybody
else while serving netlogon.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Thu Dec 9 18:57:15 UTC 2021 on sn-devel-184
Best viewed with 'git show -b'
As we're touching the DEBUG() code, change it to modern DBG_NOTICE().
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
We no longer use resolve_wildcards() so comment it out
for later removal. Keep the '{ ... }' block around the
singleton rename for now, to keep the diff small.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
