IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This sometimes fails, apparently due to a cat process in onnode
getting EAGAIN. The conclusion is that tests that process large
amounts of output should not depend on a sub-shell delivering that
output into a shell variable.
Change try_command_on_node() to leave all of the output in file
$outfile and just put the first 1KB into $out. $outfile is removed
after each test completes.
Change the implementation of sanity_check_output() to use $outfile
instead of $out.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
All callers are currently passed $out. Global variable $out is used
in many other places so use it here to simplify the interface and make
future changes simpler.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This file is included by local_daemons.sh, which is not a bash script
and wait_until() uses the "local" keyword. Prefixing variable names
with '_' to indicate that they are local changes a lot of lines in
this function. So, fix indentation, potential quoting problems and
other ShellCheck hits while touching this function.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
This isn't used anywhere that requires it to be exported, but the lack
of consistency will cause problems and confusion at some later stage.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
Always create an empty event script directory. If $TEST_SUBDIR is
unset then don't use it to look for etc-ctdb/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Don't calculate this locally as _tools_dir. Add it to PATH
unconditionally - this may result in duplicate entries in PATH but the
resulting code is simpler.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Don't calculate this locally as _test_bin_dir. Just calculate
top_dir, source script_install_paths.sh and use
$CTDB_SCRIPT_TESTS_BINDIR.
Don't bother sanity checking if TEST_BIN_DIR is set. It will go away
soon.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ctdb_test_init() now passes any arguments to setup_ctdb().
Update tests that have custom local daemon configuration to call
ctdb_test_init() directly. Remove the redundant, initial call to
ctdb_test_init() to avoid starting the cluster an extra time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This no longer does anything. Integration test cases now start and
shut down the cluster.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The remainder of the scheduled restart logic is about to be removed,
so produce debugging information any time the cluster is not healthy.
While here, reindent and drop the else since there is already an early
return before it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This makes tests self-contained. They can also now be individually
looped, if necessary.
Most tests (all but 1 complex, more than 50% of simple) restart the
daemons anyway, so this simplification is worth it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Exit on first test failure instead of setting a variable. The bizarre
logic in ctdb_test_exit() makes this worth dropping.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Record counts are sometimes incomplete for large databases when
relevant tests are run on a real cluster.
This probably has something to do with ssh, pipes and buffering, so
move the filtering and counting to the remote end. This means that
only the count comes across the pipe, instead of all the record data.
Instead of explicitly excluding the key for persistent database
sequence numbers, just exclude any key starting with '_'. Such keys
are not used in tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Oct 8 05:36:11 CEST 2018 on sn-devel-144
There are too many functions to start/stop daemons. Simplify this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are too many functions to start/stop daemons. Simplify this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are too many functions to start/stop daemons. Simplify this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB's test suite doesn't work from a top-level compile. The first
step to fixing this is to correctly locate the bin/ directory.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This will always find a binary helper, as opposed to a script helper,
which currently lives under tools/ in the source tree.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The echo command in dash expands octal escapes in strings by default
but the echo command in bash doesn't. Since the behaviour is
ill-defined, use printf to handle affected strings. However, ensure
that these strings aren't used as format strings.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Mar 27 09:06:14 CEST 2018 on sn-devel-144
On the node where the tests are run, CTDB_BASE is always set. This
applies to local daemons too. However, when tests are being run
against a real cluster, there may be a need to access configuration
files. However, CTDB_BASE will not be set in this case.
So, provide a function to get CTDB_BASE, if set, or a real cluster
node's configuration directory, if CTDB_BASE is not set.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The previous test might have made configuration changes, so call
setup_ctdb() to cause the configuration to be rewritten. This is only
really useful in local daemons tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Several test suites need the CTDB_BASE directory to contain a subset
of the regular contents of that subdirectory. In some cases there are
symbolic links in the test directory (or a subdirectory) and these
symbolic links need to be fixed at installation time.
Instead, add new function setup_ctdb_base() to set CTDB_BASE, create
the directory and populate it as specified. This relies on
script_install_paths.sh so it can copy the specified targets. It also
copies any files from the test directory's etc-ctdb/ subdirectory.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Separate stopping and starting of daemons during restart
This allows actions to be taken after stopping and allows the init
testcase to be clearer about what it is doing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The rest of the code in this file now matches the coding guidelines,
so clean up the rest.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
When using non-standard test subdirectories, the current code can fail
to find the test bin directory and stupidly just adds /bin to PATH.
Switch to using CTDB_TESTS_ARE_INSTALLED along with some sanity checks
to determine the mode of operation.
With this change, test directories can now be created as
subdirectories of arbitrary component directories. Tests can then be
run directly, either by specifying the subdirectory or individual test
cases.
Integration into the top-level tests/ directory is then done via a
symbolic link, which enables 2 things:
* Ability to run a directory of test cases from top level by simply
specifying the link name.
* Ease of installation - the installation code just works with the
symbolic link.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
So it can be called within the script instead of just by scripts that
include it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Mon Jan 16 15:46:42 CET 2017 on sn-devel-144
Avoids valgrind and such, so a function can be passed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This simplifies comparing the output to the expected output.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
