IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
code.
In particular this assists tpot in some of his work, becouse it provides the
connection between the authenticaion and the vuid generation.
Major Changes:
- Fully malloc'ed structures.
- Massive rework of the code so that all structures are made and destroyed
using malloc and free, rather than hanging around on the stack.
- SAM_ACCOUNT unix uids and gids are now pointers to the same, to allow them
to be declared 'invalid' without the chance that people might get ROOT by
default.
- kill off some of the "DOMAIN\user" lookups. These can be readded at a more
appropriate place (probably domain_client_validate.c) in the future. They
don't belong in session setups.
- Massive introduction of DATA_BLOB structures, particularly for passwords.
- Use NTLMSSP flags to tell the backend what its getting, rather than magic
lenghths.
- Fix winbind back up again, but tpot is redoing this soon anyway.
- Abstract much of the work in srv_netlog_nt back into auth helper functions.
This is a LARGE change, and any assistance is testing it is appriciated.
Domain logons are still broken (as far as I can tell) but other functionality
seems
intact.
Needs testing with a wide variety of MS clients.
Andrew Bartlett
(This used to be commit f70fb819b2)
more.
(Previously it set them to 'XXXX' or similar when only the flags were being
changed - a bug I must have introduced when I reworked the passdb end of things
a few weeks back.)
Adds a new local flag: LOCAL_SET_PASSWORD to specify that the password is
actually to be changed.
Andrew Bartlett
(This used to be commit cea6b6cb22)
In particular this commit focuses on:
The guts of the moving about inside passdb.
While these changes have been mildly tested, and are pretty small, any
assistance in this is appreciated.
----
These changes allow for the introduction of a large dose of 'const' to
the Samba tree.
There are a number of good reasons to do this:
- I want to allow the SAM_ACCOUNT structure to move from wasteful
pstrings and fstrings to allocated strings. We can't do that if
people are modifying these outputs, as they may well make
assumptions about getting pstrings and fstrings
- I want --with-pam_smbpass to compile with a slightly sane
volume of warnings, currently its pretty bad, even in 2.2
where is compiles at all.
- Tridge assures me that he no longer opposes 'const religion'
based on the ability to #define const the problem away.
- Changed Get_Pwnam(x,y) into two variants (so that the const
parameter can work correctly): - Get_Pwnam(const x) and
Get_Pwnam_Modify(x).
- Reworked smbd/chgpasswd.c to work with these mods, passing
around a 'struct passwd' rather than the modified username
passdb/
- Kill off disp_info stuff, it isn't used any more - Kill off
support for writing to the old smbpasswd format, it isn't relevent
to Samba 3.0
- Move around and modify the pdb_...() helper functions, adding
one that sets the last changed time to 'now' and that sets the
must change time appropriately.
- Remove the ugly forced update of the LCT- value in
pdb_smbpasswd. - Remove the implicit modification of the ACB
flags when both NT and LM passwords are set.
- Removed substation in pdb_getsampwnam output, as a single
password change will render them inoperable in any case (they
will be substituted and stored)
- Added a default RID to the init_sam_from_pw() function, based on
our rid algorithm.
- Added checks that an smbpasswd stored user has a uid-based RID.
- Fail to store tdb based users without a RID
lib/
- Change the substituion code to use global_myname if there is
no connection (and therefore no called name) at the present time.
(This used to be commit 8f607810eb)
rpcclient code. Refactored cmd_* functions to move common mem_ctx and pipe
opening stuff up one level. Moved rpcclient.h into rpcclient directory and
out of includes/smb.h
(This used to be commit a40facba96)
activate you need to:
- install krb5 libraries
- run configure
- build smbclient
- run kinit to get a TGT
- run smbclient with the -k option to choose kerberos auth
(This used to be commit d330575856)
was not forced to be 8 byte aligned. Use union to force it to be correctly aligned
for memcpy and use void *, to tell compiler not to optimize aligned copy (this last fix
suggested by Trond @ RedHat). The first fix should be sufficient, but this provides a
"belt and braces" fix.
Jeremy.
(This used to be commit 22c5915bb4)
Rework the 'map to guest' code, its now possible to follow what its trying
to do...
Add an NT_STATUS_EQUAL(x,y) macro to make this stuff sane to look at.
Andrew Bartlett
(This used to be commit d618880661)
- added WERROR for win32 error codes
- added a configure test for immediate structures
still lots to do, so its not enabled by default, but the main
structure is there
(This used to be commit 24f9ab683d)
major changes include:
- added NSTATUS type
- added automatic mapping between dos and nt error codes
- changed all ERROR() calls to ERROR_DOS() and many to ERROR_NT()
these calls auto-translate to the client error code system
- got rid of the cached error code and the writebmpx code
We eventually will need to also:
- get rid of BOOL, so we don't lose error info
- replace all ERROR_DOS() calls with ERROR_NT() calls
but that is too much for one night
(This used to be commit 83d9896c1e)
fixes some problems wih some character sets and allows for using
internal charsets in conjunction with ionv charsets
this makes us slower but more correct. speed will come later.
(This used to be commit 594f84b4e3)
This commit gets rid of all our old codepage handling and replaces it with
iconv. All internal strings in Samba are now in "unix" charset, which may
be multi-byte. See internals.doc and my posting to samba-technical for
a more complete explanation.
(This used to be commit debb471267)
send unaligned unicode strings sometimes!
Fixed our handling of the workgroup name tacked on the end of the
NT1 negprot response (a unaligned unicode)
fixed a couple of places where we should be using the message_end fns instead
of pre-calculated buffer lengths
(This used to be commit 86613493a9)
it will avoid problems with lists being longer than 1024 bytes
just now only ip list parameters have been converted to the new type
(hosts allow, hosts deny, ssl hosts, ssl hosts resign)
(This used to be commit e1572f85d6)
CAP_LARGE_READX|CAP_LARGE_WRITEX bits on negprot and out W2K
performance goes through the roof......
And as we *always* offer 64 buffers we can do this with this
simple change.....
Jeremy.
(This used to be commit c328dda0fa)
- cleaned up GNUC printf attribute macros
- added enum handling in mkproto
- removed non-vararg code
- made slprintf and vslprintf just macros for snprintf and vsnprintf
- don't need slprintf code any more
(This used to be commit c7aeb2254d)
for memory allocation. This fixes a long standing seg fault
(i knew i would get around to it one day :) )
Tested with NT4 and Win2k. Needs a little more testing with the
"create the machine account on the fly" code for NT4.
Simo, this is probably going to break the tdb passdb code.
Can you look at that when you get a chance and see what you think?
(This used to be commit 1c13110873)
when copying to a full disk problem, I discovered that we were not allowing
the delete on close flag to be set properly, this led to other things, and
after investigation of the proper delete on close semantics and their relationship
to the file_share_delete flag I discovered there were some cases where we
weren't doing the deny modes properly. And this after only 5 years working
on them..... :-) :-).
So here's the latest attempt. I realised the delete on close flag needs to
be set across all smbds with a dev/ino pair open - in addition, the delete
on close flag, allow share delete and delete access requested all need to
be stored in the share mode tdb.
The "delete_on_close" entry in the fsp struct is now redundant and should
really be removed. This may also mean we can get rid of the "iterate_fsp"
calls that I didn't like adding in the first place. Whilst doing this patch,
I also discovered we needed to do the se_map_generic() call for file opens
and POSIX ACL mapping, so I added that also.
This code, although ugly, now passes the deny mode torture tests plus the
delete on close tests I added. I do need to add one more multiple connection
delete on close test to make sure I got the semantics exactly right, plus we
should also (as Andrew suggested) move to random testing here.
The good news is that NT should now correctly delete the file on disk
full error when copying to a disk :-).
Jeremy.
(This used to be commit 51987684bd)
now in pipe struct (where used) rather than user_struct.
Secured machine account password changing in srv_netlog_nt.c - ensure
that only the given machine can change its own password. May need to
free this up later for NT admin tools, but this is a fail-safe secure
position for now.
Jeremy.
(This used to be commit 46b12f2275)
include/smb.h: Added LPQ_xx enums to correspond with the NT JOB_STATUS_XXX. We
need these to be different as we're storing LPQ_xx enums in the tdb
already.
rpc_server/srv_spoolss_nt.c: Don't need to return status strings as we're now
returning status codes.
smbd/lanman.c: Change the RAP status codes to have "RAP" in the name.
printing/printing.c: Keep track of the status of a job. Allow a job to be
deleted from one smbd when being submitted by another.
Made logic in mutex clearer.
Jeremy.
(This used to be commit 71029da7dd)
source/rpc_server/srv_spoolss_nt.c
- add an access check to _spoolss_deleteprinter() to stop random
users and passers by from deleting printers.
source/lib/messages.c
- converted global msg_all struct to a local in message_send_all()
function.
source/include/smb.h
- added a success error code to the spoolss return codes.
source/include/proto.h
source/param/loadparm.c
source/printing/printing.c
- Added new parameter "total print jobs" to limit the total number
of print jobs across all queues. Currently individual queues are
limited by "max print jobs".
(This used to be commit 02f154e729)
list of structures rather than the dodgy parsing code we had before
this also gets smbw working correctly with no initial workgroup (using
name_status_find on __MSBROWSE__ returns)
(This used to be commit f2be88a873)
Currently does exactly the same thing (returns ACLs the same way). This
code is written to try and get a POSIX ACL via the abstract sys_XX interface,
then fall back to providing a UNIX based ACL if the calls fail. Seems to
work. Next step is to add a --with-posix-acls to configure.in and then
check on a POSIX ACL system that a complex ACL is returned correctly
as an NT ACL. Note that the ACL set (a more complex problem) is not
addressed yet.
Jeremy.
(This used to be commit 4339e20202)
statement after an 'if'. Tracking this down took 4 hours from my life and ANDREW I WANT
THEM BACK !!!!! :-).
include/smb.h smbd/password.c: Fixed the bug veritas reported with realloc of the validated_users
array growing without bounds. This is now a linked list as god (Andrew) intended :-).
Jeremy.
(This used to be commit 346f2f9206)
o added BOOL own_memory flag in SAM_ACCOUNT so we could
use static memory for string pointer assignment or
allocate a new string
o added a reference TDB passdb backend. This is only a reference
and should not be used in production because
- RID's are generated using the same algorithm as with smbpasswd
- a TDB can only have one key (w/o getting into problems) and we
need three. Therefore the pdb_sam-getpwuid() and
pdb_getsampwrid() functions are interative searches :-(
we need transaction support, multiple indexes, and a nice open
source DBM. The Berkeley DB (from sleepycat.com seems to fit
this criteria now)
o added a new parameter "private dir" as many places in the code were
using lp_smb_passwd_file() and chopping off the filename part.
This makes more sense to me and I will docuement it in the man pages
o Ran through Insure-lite and corrected memory leaks. Need for
a public flogging this time Jeremy (-:
-- jerry
(This used to be commit 4792029a29)
