IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This would typically happen when the garbage collection
removed a parent object before a child object (both with
the DISALLOW_MOVE_ON_DELETE bit set in systemFlags),
while dbcheck is running at the same time as the garbage collection.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13816
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
When a parent object is removed during the tombstone garbage collection
before a child object and samba-tool dbcheck runs at the same time, the
following can happen:
- If the object child had DISALLOW_MOVE_ON_DELETE in systemFlags,
samba-tool dbcheck moves the object under the LostAndFound[Config]
object (as an originating update!)
- The lastKnownParent attribute is removed (as an originating update!)
These originating updates cause the object to have an extended time
as tombstone. And these changes are replicated to other DCs,
which very likely already removed the object completely!
This means the destination DC of replication has no chance to handle
the object it gets from the source DC with just 2 attributes (name, lastKnownParent).
The destination logs something like:
No objectClass found in replPropertyMetaData
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13816
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
These are only used within the function, and there's already a local
variable that stores the same info.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Setting up a testenv involves populating 2 different hashmaps - an
intermediary one (usually called 'ctx') and one that is used to populate
the testenv environment variables (usually called 'env_vars' or
'dcvars').
Because the dns_hub setup is very simple, it doesn't need two different
hashmaps. However, the variable names are still a mix of the two
hashmaps.
This patch updates dns_hub to use the second, more finalized hashmap
variable-names.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This has the side-effect of giving the client an IPv6 address, which it
hasn't had up until now. But it at least makes the client and server
interfaces settings consistent, and gets rid of a hard-coded IP address.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Add a helper function to return the IPv4/IPv6 addresses for the
smb.conf. This keeps the netmask assumptions in the same places as
the IP subnet assumptions.
This refactor means we no longer need to store $ctx->{interfaces}, as it
was only used in one place.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
I can't see anything in the tests that ever tries to use these other IP
addresses. While it makes sense that we might want the tests to simulate
multiple different clients (with different IPs), we don't appear to do
this currently.
Removing the spare client addresses minimizes the number of hard-coded
IP addresses in selftest.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The build farm is no longer used, so we can remove checks for this
environment variable in the selftest code.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This writes out the environment variables that are normally setup in the
testenv xterm to a file. This allows them to be sourced later.
This function is currently unused. However, it provides an alternative
replacement for the selftest-vars.sh script (which is really out of
date). I do plan to make use of this function in a subsequent patch-set.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This brings it closer to the code that actually sets these variables
(i.e. Samba3/4.pm).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This doesn't appear to be used anywhere and dates back to 2008.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This should make it clear at run-time how dns_hub is actually proxying
DNS requests, which will hopefully aid in debugging problems (i.e.
forgetting to add a mapping when adding a new DNS realm).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Mar 6 00:48:43 UTC 2019 on sn-devel-144
We've dropped the iface logic now - this dictionary maps from
realm-to-IP.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The code is more readable if the hashmap translates between realm and
DC-name, rather than realm-to-iface. We already have a function to map
between DC-name and iface (and since we're doing this, we might as well
map straight to IP address).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Instead of storing hashmaps in 2 different files, we can just convert a
perl hashmap into a string, pass it to dns_hub, and convert it back into
a python dictionary.
The main reason for doing this is the IP-to-testenv mapping now all
lives in a single file (Samba.pm). All this logic is right next to each
other rather than being split across multiple files. Hopefully this will
make it easier to keep it up to date as we add new testenvs.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Add a separate helper function, as the realm-to-IPv4-addr logic is
fairly self-contained.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
dns_hub.py maps the testenv realm to an IP and Samba.pm maps the testenv
NetBIOS name to an IP. We need to keep the two places consistent, as we
add or remove testenvs.
This patch changes dns_hub.py so that it uses a similar hashmap to
Samba.pm. We now have a hashmap with the same name in 2 different
places, so hopefully that's easier to tie them together and keep them in
sync.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It looks a bit cleaner if we declare the hash-map in one go, rather than
adding each entry one at a time. Also added a comment explaining what
the hash-map is for, and fixed up tab vs spaces inconsistencies.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We implicitly assume the client IP used by selftest is always
127.0.0.11. Add an iface entry for the client to make this a little more
explicit.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
dns_hub doesn't need to store $ctx->{swiface}. Other testenvs store this
and export it as SOCKET_WRAPPER_DEFAULT_IFACE (i.e. for the tests to
use), but dns_hub doesn't need to do this.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The auth-logging tests are an odd combination of server and client
behaviour. On the one hand we want a IRPC connection to see the auth
events being logged on the server. On the other hand, we want the auth
events to appear to be happening on a client. Currently we hardcode in
the use of a SOCKET_WRAPPER interface to make this happen.
We can avoid this explicit socket wrapper usage by using the server
smb.conf instead in the one place we actually want to act like the
server (creating the IRPC connection). Then we can switch from using
the 'ad_dc*:local' testenvs to use 'ad_dc*', in order to act like a
client by default. The SERVERCONFFILE environment variable has already
been added for the few cases where a test needs explicit access to the
server's smb.conf.
However, for samba.tests.auth_log, the samlogon test cases are still
reliant on being run on the :local testenv, and so we can't switch them
over just yet. This is because the samlogon is using the DC's machine
creds underneath, which will fail on the non-local testenv. We could
create separate machine creds for the client and use those, but this is
a non-trivial rework of the test code.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Deny ACEs must always be evaluated against explicitly granted rights
from previous ACEs.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13812
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Creates a 2-element ALLOW + DENY ACE showing that when calculating
effective permissions and maximum access already seen allow bits are not
removed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13812
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Creates a 3-element ALLOW + ALLOW + DENY ACE showing that when
calculating maximum access already seen allow bits are not removed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13812
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
We basically must process the Owner Rights ACEs as any other ACE wrt to the
order of adding granted permissions and checking denied permissions. According
to MS-DTYP 2.5.3.2 Owner Rights ACEs must be evaluated in the main loop over
the ACEs in an ACL and the corresponding access_mask must be directly applied
to bits_remaining. We currently defer this to after the loop over the ACEs in
ACL, this is wrong.
We just have to do some initial magic to determine if an ACL contains and
Owner Rights ACEs, and in case it doesn't we grant SEC_STD_WRITE_DAC |
SEC_STD_READ_CONTROL at the *beginning*. MS-DTYP:
-- the owner of an object is always granted READ_CONTROL and WRITE_DAC.
CALL SidInToken(Token, SecurityDescriptor.Owner, PrincipalSelfSubst)
IF SidInToken returns True THEN
IF DACL does not contain ACEs from object owner THEN
Remove READ_CONTROL and WRITE_DAC from RemainingAccess
Set GrantedAccess to GrantedAccess or READ_CONTROL or WRITE_OWNER
END IF
END IF
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13812
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Shows that owner and SID_OWNER_RIGHTS ACE
entries interact in max permissions requests.
Tested against Windows.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13812
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This was missing in 44590c1b70c0a24f853c02d5fcdb3c609401e2ca.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13812
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Thu Feb 28 19:18:16 UTC 2019 on sn-devel-144
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Wed Feb 27 11:24:59 UTC 2019 on sn-devel-144
This will allow us to run really most tests in an isolated
autobuild/ci task later.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This will allow us to run really most tests in an isolated
autobuild/ci task later.
This will apply to tests, which may not rely on the ntvfs backend, so
the ad_dc_default alias can point to another environment in future.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This will allow us to run really slow tests in an isolated
autobuild/ci task later.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Using aliases it will be possible to split the large amount
of tests which use ad_dc_ntvfs into multiple autobuild/ci
tasks/jobs later.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Previous regression test ensures we still return the correct
error code for POSIX pathname operations.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13803
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Mon Feb 25 09:33:27 CET 2019 on sn-devel-144
Ensure that if POSIX_foo exists as a file
we return the correct error code NT_STATUS_OBJECT_PATH_NOT_FOUND
if we try and traverse it as a directory.
Also ensure creation/deletion of POSIX_foo/foo fails
for directories and files with NT_STATUS_OBJECT_PATH_NOT_FOUND
if the directory POSIX_foo/ doesn't exist.
knownfail is back :-).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13803
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
For posix_pathnames don't blunder into the name_has_wildcard OR
get_real_filename() codepaths as they may be doing case insensitive lookups.
So when creating a new POSIX directory 'Foo' they might
match on name 'foo'.
Remove POSIX-MKDIR from knownfail.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13803
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Sun Feb 24 14:04:14 CET 2019 on sn-devel-144
Test does:
mkdir POSIX_foo
mkdir POSIX_Foo
mkdir POSIX_foo/Foo
mkdir POSIX_foo/foo
mkdir POSIX_Foo/Foo
mkdir POSIX_Foo/foo
Which should pass a SMB1 POSIX extensions server
as posix mkdir should always be case sensitive
no matter what the share is set to.
Mark as knownfail for now.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13803
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Generate JSON authentication messages for winbind PAM_AUTH and
PAM_AUTH_CRAP requests. The logon_id in these messages can be used to
link them to the SamLogon messages.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Tests to validate that winbind generates a random logon_id and passes it
in the netlogon call.
This will allow the linking of the windbind authentication requests and
the SamLogon request on the DC.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Previously we were only checking samba compiled OK with
--disable-python, not that it actually ran.
The main problem is all the make test framework is based around
subunit/smbtorture, neither of which we seem to build with
disable-python. However, for just a simple sanity-check, we can just
bypass all the subunit-filter work and just call the Perl code directly.
This works OK as long as it's just simple shell script tests that we're
running, as we can check the script's exit code directly.
The main thing that we really want to test is that we can start up the
smbd testenv and connect to it (i.e. a simple smbclient test).
This patch adds a new 'make test-nopython' target. This disables the
subunit filtering, and runs a small test-list that was generated manually.
Note that currently this has the limitation that it doesn't support known
failures or flapping tests. However, just checking that smd starts up OK
is probably OK for now.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Feb 20 02:10:00 CET 2019 on sn-devel-144
The --one selftest.pl option means abort when the first test fails.
However, when 'make test' fails to startup a testenv, it'll try to
continue and run other tests by default. When '--one' is used,
selftest.pl can just die() at that point.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It's simpler to do setup DC_SERVER/etc in the same place we set
SERVER/etc. (Rather than initializing them for every single testenv,
like we were doing).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Mon Feb 18 07:24:05 CET 2019 on sn-devel-144
