IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Shows we fail sending an SMB2_OP_FLUSH + SMB2_OP_FLUSH
compound if we immediately close the file afterward.
Internally the flushes go async and we free the req, then
we process the close. When the flushes complete they try to access
already freed data.
Extra test which will allow me to test when the final
component (flush) of the compound goes async and returns
NT_STATUS_PENDING.
Add knownfail.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15172
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Shows we fail sending an SMB2_OP_FLUSH + SMB2_OP_CLOSE
compound. Internally the flush goes async and
we free the req, then we process the close.
When the flush completes it tries to access
already freed data.
Found using the Apple MacOSX client at SNIA SDC 2022.
Add knownfail.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15172
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15224
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Nov 16 19:29:21 UTC 2022 on sn-devel-184
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Nov 16 16:29:30 UTC 2022 on sn-devel-184
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15224
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
Autobuild-User(master): Noel Power <npower@samba.org>
Autobuild-Date(master): Wed Nov 16 15:09:45 UTC 2022 on sn-devel-184
tls_tstream can't properly handle 'New Session Ticket' messages
sent 'after' the client sends the 'Finished' message.
This is needed because some servers (at least elasticsearch) wait till
they get 'Finished' messgage from the client before sending the
"New Ticket" message.
Without this patch what typcially happens is when the application code
sends data it then tries to read the response, but, instead of the
response to the request it actually recieves the "New Session Ticket"
instead. The "New Session Ticket" message gets processed by the upper layer
logic e.g.
tstream_tls_readv_send
->tstream_tls_readv_crypt_next
->tstream_tls_retry_read
->gnutls_record_recv
instead of the core gnutls routines.
This results in the response processing failing due to the
currently 'unexpected' New Ticket message.
In order to avoid this scenario we can ensure the client doesn't
negotiate resumption with session tickets.
Signed-off-by: Noel Power <noel.power@suse.com>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Nov 16 09:58:45 UTC 2022 on sn-devel-184
Can easily be seen by doing make test TESTS=fruit
and looking in st/nt4_dc/smbd_test.log.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15210
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Wed Nov 16 06:00:56 UTC 2022 on sn-devel-184
Catch overflows that result from adding PAC_INFO_BUFFER_SIZE.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15203
Heavily edited by committer Nico Williams <nico@twosigma.com>, original by
Joseph Sutton <josephsutton@catalyst.net.nz>.
Signed-off-by: Nico Williams <nico@twosigma.com>
[jsutton@samba.org Zero-initialised header_size in krb5_pac_parse() to
avoid a maybe-uninitialized error; added a missing check for ret == 0]
Autobuild-User(master): Jule Anger <janger@samba.org>
Autobuild-Date(master): Tue Nov 15 17:02:52 UTC 2022 on sn-devel-184
The runonce is always being set because neither
True nor False is ever None.
Signed-off-by: David Mulder <dmulder@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Nov 15 02:09:45 UTC 2022 on sn-devel-184
This fixes the startup scripts list command to
not fail when the parameters variable is empty.
Signed-off-by: David Mulder <dmulder@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The output for listing startup scripts wasn't
clear because there was no newline between
entries.
Signed-off-by: David Mulder <dmulder@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Make sure it is clear how to specify args for the
command, and that multiple args can be passed
wrapped in quotes.
Signed-off-by: David Mulder <dmulder@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The args for the command could not be parsed
because samba-tool detects the '-' and thinks its
part of the samba-tool command.
Signed-off-by: David Mulder <dmulder@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Currently all fsctls we implement need the base fsp, not
an alternate data stream fsp. We may revisit this later
if we implement fsctls that operate on an ADS.
Remove knownfail.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15236
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andrew Walker <awalker@ixsystems.com>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Nov 14 18:13:31 UTC 2022 on sn-devel-184
Signed-off-by: David Mulder <dmulder@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Nov 12 01:34:17 UTC 2022 on sn-devel-184
If unrecognized keys are set in the GptTmpl.inf,
the extensions would fail to apply.
Signed-off-by: David Mulder <dmulder@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Thanks to Metze for the hint that all file servers already listen on 2
addressess -- V4 and V6 :-)
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Thu Nov 10 08:23:14 UTC 2022 on sn-devel-184
Only allow share connections if the server address matches
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This is a per-share parameter to limit share visibility and
accessibility to specific server IP addresses.
This can be used to limit the visibility and accessibility of shares
on different subnets offered by the server.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Nov 9 23:15:07 UTC 2022 on sn-devel-184
The target may only be available over IPv6.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15226
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Nov 9 20:34:07 UTC 2022 on sn-devel-184
We should not fail when crontab -l errors, this
just means the crontab is empty.
Signed-off-by: David Mulder <dmulder@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Nov 8 22:33:37 UTC 2022 on sn-devel-184
In which we make AS and TGS requests and verify the SIDs we expect are
returned in the PAC.
Example command to test against Windows Server 2019 functional level
2016 with FAST enabled:
ADMIN_USERNAME=Administrator ADMIN_PASSWORD=locDCpass1 \
CLAIMS_SUPPORT=1 COMPOUND_ID_SUPPORT=1 DC_SERVER=ADDC.EXAMPLE.COM \
DOMAIN=EXAMPLE EXPECT_PAC=1 FAST_SUPPORT=1 KRB5_CONFIG=krb5.conf \
PYTHONPATH=bin/python REALM=EXAMPLE.COM SERVER=ADDC.EXAMPLE.COM \
SKIP_INVALID=1 SMB_CONF_PATH=smb.conf STRICT_CHECKING=1 \
TKT_SIG_SUPPORT=1 python3 python/samba/tests/krb5/group_tests.py
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Tue Nov 8 03:37:37 UTC 2022 on sn-devel-184
We can now verify attributes of SIDs and the PAC locations in which SIDs
are placed. We also gain the ability to assert that no SIDs are present
in the PAC other than the ones we expect.
We lighten somewhat the requirement that no duplicates are present among
the SIDs, as such a situation may arise even with Windows, especially if
group types are changed. For example, if a Universal group containing a
user is changed to a Domain-Local group in between an AS-REQ and a
TGS-REQ, the group's SID will be added to the PAC once for each request.
We only verify that there are no exact duplicates (SID, attributes, and
PAC location all being identical).
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
As well as passing in a single 'str', we can now choose to pass a
collection of member DN strings.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This will be useful for testing the handling of Domain-Local groups.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It's not an encryption type bit, so we should ignore it here.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The blob will be empty until we properly support claims.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This allows us to add claims blobs to the PAC once we have the ability
to create them.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
These functions have no need to modify the PACs passed in, and this
change permits us to operate on const PACs in the KDC.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We can't unconditionally assume (as we did in
third_party/heimdal_build/wscript_configure) that Heimdal has this type,
since we may have an older system Heimdal that lacks it. We must also
check whether krb5_pac_get_buffer() is usable with krb5_const_pac, and
declare krb5_const_pac as a non-const typedef if not.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Previously, the call to CHECK_BUNDLED_SYSTEM() in
check_system_heimdal_lib() could have us pick up MIT Kerberos headers
when we should only be using system Heimdal headers. Now, we just
perform an explicit check for the functions we require, which should
avoid any use of the MIT libraries.
We also remove some library checks for Heimdal components that we don't
use directly, restricting the checks to only the functions we need.
Finally, we no longer need to recurse into third_party/heimdal_build
when performing a system Heimdal build.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We don't need to include these any more, and removing them allows us to
simplify the build system for system Heimdal builds.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The intention of this option was to hide *files*. Before this patch we
also hide directories where new files are dropped.
This is a change in behaviour, but I think this option is niche enough
to justify not adding another parameter that we then need to test. If
workflows break with this change and people depend on directories also
to be hidden, we can still add the additional option value required.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Nov 7 22:58:33 UTC 2022 on sn-devel-184
