IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
setup_ctdb_base() and node_dir() duplicate the construction of
CTDB_BASE. Drop the use of node_dir() and construct the values for
CTDB_BASES by hand.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Simple test configuration is all relative to CTDB_BASE and node_dir is
redundant. Make this explicit by dropping most uses of node_dir.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Tests now deviate from the compile-time default by setting CTDB_BASE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Tests now deviate from the compile-time default by setting CTDB_BASE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Instead of using an intermediate environment variable for nodes files,
just create "node" or "nodes.<pnn>" in CTDB_BASE. This makes the
nodes file loading in fake_ctdb slightly repetitive but simplifies the
test scripts a lot. It also remove several instance of the CTDB_NODES
variable from the code base, so it is no longer found by "git grep".
Use an empty nodes file to indicate that fake_ctdbd should fail to
read it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
setup_ctdb_base() makes this a convenient temporary directory.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Make use of variables provided by script_install_paths.sh instead of
reinventing the logic.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Create the file and then copy it to CTDB_BASE for each node.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The interface must always be specified in the public addresses file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This option adds a lot of unnecessary complexity to scripts.
Configuration should go in $CTDB_BASE, either directly or via a
symlink, so simplify by using the default location.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
On the node where the tests are run, CTDB_BASE is always set. This
applies to local daemons too. However, when tests are being run
against a real cluster, there may be a need to access configuration
files. However, CTDB_BASE will not be set in this case.
So, provide a function to get CTDB_BASE, if set, or a real cluster
node's configuration directory, if CTDB_BASE is not set.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This was added for a vendor who decided not to use it. It is almost
certainly unused by anyone. If anyone really needs it then it is in
the git history.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the specified file or the default does not exist then log a
warning.
This is done in the takeover code to localise the handling of the
public addresses file. Soon the daemon command-line option will go
away and the takeover code will be replaced in the not too distant
future.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The previous test might have made configuration changes, so call
setup_ctdb() to cause the configuration to be rewritten. This is only
really useful in local daemons tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These provide special-purpose setups for particular testcases.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
options.socket will go away in future. This moves processing of
CTDB_SOCKET close to where it is used.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use environment variables for test-only options.
The setenv() can be dropped because the socket location is either the
compile-time default or the already set environment variable.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These were necessary because CTDB_SOCKET was not already exported via
test setup.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use environment variables for test-only options. Don't put them in
the configuration file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use environment variables for test-only options.
Switch to using a local variable. This simplifies both the logic and
the ability to later drop the command-line option.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Event scripts live in a standard place.
For testing, CTDB_BASE is modified.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Event scripts live in a standard place.
For testing, CTDB_BASE is modified.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
nmap-ncat is used in some distributions to replace netcat. It has a
different meaning for these options.
We can get the same effect as the current combination of -d and -w by
piping a sleep process to nc. Subsequent use of $! works because it
gets the last process in pipeline.
Note that redirecting from /dev/null doesn't work with some versions
of nc. They just exit when they get EOF.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Mar 9 12:24:13 CET 2018 on sn-devel-144
The check action should be there. It is used by 20.nfs_ganesha.check.
This reverts commit 4fa9026bbd.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This directory is only used by simple tests when running against local
daemons. Moving it to simple/etc-ctdb/events.d/ means that it is
automatically copied by setup_ctdb_base().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The local daemons code puts the socket in the CTDB_BASE directory.
This means CTDB_NODES_SOCKETS can be replaced by CTDB_BASES, a list of
base directories. The fake ssh script can first determine the correct
CTDB_BASE directory and then use it to set CTDB_SOCKET and
CTDB_PIDFILE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The comment in local.bash is incorrect. CTDB_BASE will never be set
here because this script is not run under onnode. Instead, this where
CTDB_BASE needs to be set when running against a real cluster.
For local daemons, the check for CTDB_BASE being inconsistent with
node_dir is temporary.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This could have been done earlier but previous movement of lines out
to new functions has made the job easier.
Best viewed with show/diff -w.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Untangle a single loop into two separate, clear functions. Create a
separate, empty file for the node with no public IPs instead of
pointing the configuration at /dev/null.
Leave the indentation in setup_ctdb() in the old style to make this
commit comprehensible.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
