IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
connection that set it up has been shut down.
(Also, pipes still connected, and reconnections to the same pipe (eg SAMR)
may continue to use that session key until their TCP/IP connection is shut
down)
Allow further testing by printing out the session key, and allowing it's input
into rpcclient.
Next step is automatic storage in a TDB.
Andrew Bartlett
(This used to be commit fa4d7be1619b51aacec37ddf995c940b8100aef9)
to pstr_sprintf() and fstr_sprintf() to try to standardize.
lots of snprintf() calls were using len-1; some were using
len. At least this helps to be consistent.
(This used to be commit 9f835b85dd38cbe655eb19021ff763f31886ac00)
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
* move back to qsort() for sorting IP address in get_dc_list()
* remove dc_name_cache in cm_get_dc_name() since it slowed
things down more than it helped. I've made a note of where
to add in the negative connection cache in the ads code.
Will come back to that.
* fix rpcclient to use PRINTER_ALL_ACCESS for set printer (instead
of MAX_ALLOWED)
* only enumerate domain local groups in our domain
* simplify ldap search for seqnum in winbindd's rpc backend
(This used to be commit f8cab8635b02b205b4031279cedd804c1fb22c5b)
that is now possible to, for example, load a module which contains
an auth method into a binary without the auth/ subsystem built in.
(This used to be commit 74d9ecfe2dd7364643d32acb62ade957bd71cd0d)
important once we start doing schannel, as there would be a lot more
roundtrips for the second PIPE open and bind. With this patch logging
in to a member server is a matter of two (three if you count the
ack...) packets between us and the DC.
Volker
(This used to be commit 5b3cb7725a974629d0bd8b707bc2940c36b8745e)
>Patch from waider to set exit code of last executed command specified
>as an argument to -c.
(This used to be commit b1ad69268889dbc2765ae98789112a28dc4c40c6)
>Return NT_STATUS_UNSUCCESSFUL if the sourcedata and echodata rpcs
>return unexpected data.
>
>Closes bug #2.
(This used to be commit 2e5f75beafd3f3d81869ce68e77b8c53cd7a2caf)
a pstrcpy/fstrcpy or at most a safe_strcpy().
These have the advantage of being compiler-verifiable.
Get these out of the way, along with a rewrite of 'get_short_archi' in the
spoolss client and server. (This pushes around const string pointers, rather
than copied strings).
Andrew Bartlett
(This used to be commit 32fb801ddc035e8971e9911ed4b6e51892e9d1cc)
This allows us to join as a BDC, without appearing on the network as one
until we have the database replicated, and the admin changes the configuration.
This also change the SID retreval order from secrets.tdb, so we no longer
require a 'net rpc getsid' - the sid fetch during the domain join is sufficient.
Also minor fixes to 'net'.
Andrew Bartlett
(This used to be commit 876e00fd112e4aaf7519eec27f382eb99ec7562a)
Also merged a bunch of other random changes as this file has
been drifting off due to lack of janitors.
(This used to be commit 38337ec5ef1bd0e8fa7ba74ea1bc8a21bf2001b2)
requests and responses and is only compiled in when --enable-developer
is passed to configure. It includes server and client side code for
generating and responding to functions on this pipe. The functions are:
- AddOne: add one to the uint32 argument and return ig
- EchoData: echo back a variable sized char array to the caller
- SourceData: request a variable sized char array
- SinkData: send a variable sized char array and throw it away
There's a win32 implementation of the client and server in the
junkcode CVS repository in the rpcecho-win32 subdirectory.
(This used to be commit 4ccd34ef836eba05f81dc2da73fd7cfaac201798)
rpcclient -S pdc -U% -c "samlogon user password"
and it should work with the schannel. Needs testing against platforms
different from NT4SP6.
Volker
(This used to be commit eaef0d8aeff1aa5a067679be3f17e08d7434e1e8)
rpcclient -S pdc -U% -c "samlogon user password"
and it should work with the schannel. Needs testing platforms
different from NT4SP6.
Volker
(This used to be commit ecd0ee4d248e750168597ccf79c389513bb0f740)
> when doing "enumdomusers", rpcclient prints each one preceded by the
> word "group" instead of "user"
(This used to be commit 0e9a2f41df932585bbff2a1a53d3dadc9a3dac62)
> when doing "enumdomusers", rpcclient prints each one preceded by the
> word "group" instead of "user"
(This used to be commit 17567dd1d510d4cf1dffa67be78510ae51571ec6)
Merge: add popt_common_version to command line options table.
Merge: mbp's rewrite of do_cmd()
(This used to be commit 20f153cee38edfa93ffd60cc872a299a4f296240)
remember under what mail address I have to post.
My last commit to this file made it compile again, my fingers were a bit
too fast to really type this message.
Sorry for this confusion,
Volker
(This used to be commit 3b905f5a16dff8ce6742a92fd403cb720707f513)
