IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Test to see how the server behaves when the client flushes data back to
the server but doesn't send the lease break response over the channel.
Does it then retry the lease break?
This test is specifically expected to run against Samba and will not
work against a MS Windows servers because it uses the ignore method to
ignore oplock breaks sent by the server.
Signed-off-by: Guenther Deschner <gd@samba.org>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Check to see how the server behaves if lease break response is sent
over a different channel to one over which the break is received.
The test by default blocks channels by ignoring incoming lease break
requests on that channel. This does not work when testing against a
windows server.
Use --option=torture:use_iptables=true to use iptables to block ports
instead when testing against windows servers.
Signed-off-by: Guenther Deschner <gd@samba.org>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Test to check if lease breaks are sent by the server as expected.
The test by default blocks channels by ignoring incoming lease break
requests on that channel. This does not work when testing against a
windows server.
Use --option=torture:use_iptables=true to use iptables to block ports
instead when testing against windows servers.
Signed-off-by: Guenther Deschner <gd@samba.org>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Test to check if lease breaks are sent by the server as expected.
Signed-off-by: Guenther Deschner <gd@samba.org>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Test to see if oplock break retries are sent by the server.
Also checks to see if new channels can be created and used
after an oplock break retry.
The test by default blocks channels by ignoring incoming lease break
requests on that channel. This does not work when testing against a
windows server.
Use --option=torture:use_iptables=true to use iptables to block ports
instead when testing against windows servers.
Signed-off-by: Guenther Deschner <gd@samba.org>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Test to confirm that server sends oplock breaks as expected.
Signed-off-by: Guenther Deschner <gd@samba.org>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
We use two methods to block channels
1) Simply ignore incoming oplock break requests and do not respond to
them.
This method doesn't work against Microsoft Windows based servers which
rely on the tcp stack for confirmation that the oplock break command was
sent to the client machine. This is meant to be used with samba servers
and is the default method.
2) Use iptables to block the channel.
The method requires the use of a privileged account and can only be used
on Linux systems with iptables installed. To use this blocking method,
pass the option
--option=torture:use_iptables=true
Signed-off-by: Guenther Deschner <gd@samba.org>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Helper functions used by both oplock and lease break tests.
Signed-off-by: Guenther Deschner <gd@samba.org>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
New macros used by our tests.
Signed-off-by: Guenther Deschner <gd@samba.org>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
0.1 seconds is not enough when running tests against a server over the
network and are causing timing related bugs. We increase this to 1
second.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
For use in multichannel oplock break tests. These handers ignore
incoming oplock and lease break requests so that we can test the
oplock/lease break retries on the server.
This is meant for use with samba servers which rely on receiving a reply
from the client before timeout.
Windows servers rely on underlying tcp commands to decide if the oplock
break command was delivered successfully to the client and therefore
cannot be tested with this method.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Do not completely depend on proto.h.
Also move torture_reset_break_info() to lease_break_handler.h so that
the layout is similar to that of oplock_break_handler.*
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Also Skip MC tests for s4 ntvfs fileserver, it's not supported at all.
Use knownfail for s3 fileserver for the time being (until socketwrapper
supports fd-passing).
Signed-off-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
During replication, transmission of objects and linked attributes are
split into chunks. These two tests check behavioural consistency across
chunks for regular schema objects and linked attributes.
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Cmocka test exposing LDB bug where a request with an empty attributes
list returns a response containing all attributes. The bug is in the
ACL module and will be fixed in the next commit.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13836
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Both:
smbtorture //w2012r2-188/torture -Ua%b smb2.notify.valid-req --smb-ports=139
and:
smbtorture //w2012r2-188/torture -Ua%b smb2.notify.valid-req --smb-ports=445
work against Windows 2008R2, 2012R2 and 2016 now and it reflects what
we have implemented in Samba.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13864
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
There's no reason to use torture_setup_complex_file(), when we want to
test notify code. The test pass fine against Samba this way and don't
fail because of unrelated timestamp behavior.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13864
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Instead of the *_complex_file() versions these don't use EA's nor
complex timestamps.
A lot of tests currently using *_complex_file() only fail because
smbd doesn't implement the correct 'change_time' update behavior.
That should not be the reason why all smb2 related tests fail.
Timestamps should be tested in dedicated tests.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13864
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is 1000 times longer than before and is less likely to
change the timing behavior when running under valgrind.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This is 1000 times longer than before and is less likely to
change the timing behavior when running under valgrind.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This test was failing now that the client had an IPv6 address, however,
the test was marked as flapping so this failure wasn't obvious.
Use iface_list_n_is_v4() to filter out only the IPv4 addresses, as
that's all the test cares about.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The samba3.blackbox.shadow_copy_torture tests call to strptime passing
an uninitalized tm structure as an argument, but the strptime function
does not write the tm.tm_isdst field.
These tm structures are passed later as the mktime argument, which
produces different values depending on whether the arbitrary value
of the tm.tm_isdst field is lower or equal to zero or greather than
zero.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Use a temporary struct as a return value to make the compiler catch all
callers. If we just changed bool->ssize_t, this would just generate a
warning. struct sid_parse_ret will go away in the next commit
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
samba-o3 test failed in ubuntu:16.04 docker container:
==> /home/samba/samba/samba-o3.stderr <==
../../source4/torture/raw/eas.c: In function ‘test_max_eas’:
../../source4/torture/raw/eas.c:286:12: error: assuming signed overflow does not occur when simplifying conditional to constant [-Werror=strict-overflow]
static bool test_max_eas(struct smbcli_state *cli, struct torture_context *tctx)
^
cc1: all warnings being treated as errors
`total += j` may overflow. Change total type to `size_t` to mute error.
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
When access_mask contains SEC_FLAG_MAXIMUM_ALLOWED, the server must still
proces other bits from access_mask. Eg if access_mask contains a right that
the requester doesn't have, the function must validate that against the
effective permissions.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Creates a 2-element ALLOW + DENY ACE showing that when calculating
effective permissions and maximum access already seen allow bits are not
removed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13812
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Creates a 3-element ALLOW + ALLOW + DENY ACE showing that when
calculating maximum access already seen allow bits are not removed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13812
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Shows that owner and SID_OWNER_RIGHTS ACE
entries interact in max permissions requests.
Tested against Windows.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13812
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
In order to detect an value overflow error during
the string to integer conversion with strtoul/strtoull,
the errno variable must be set to zero before the execution and
checked after the conversion is performed. This is achieved by
using the wrapper function strtoul_err and strtoull_err.
Signed-off-by: Swen Schillig <swen@linux.ibm.com>
Reviewed-by: Ralph Böhme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Fold the two 32 bit values logon_id_high and logon_id_low into a single
64 bit logon_id in netr_identity_info. This will be used to tie
together winbind and SamLogon requests in audit logging.
Summary of the of the Query and Response from Microsoft on it's usage.
[REG:119013019612095] [MS-NRPC]: NETLOGON_LOGON_IDENTITY_INFO: Does
the Reserved field have LogonId meaning?
Questions:
In NetrLogonSamLogonEx does the Reserved field
(of NETLOGON_LOGON_IDENTITY_INFO) have LogonId meaning?
What is a valid LogonID, and does have any audit usage?
Samba is sending a constant "deadbeef" in hex and would like to
understand any usage of this field.
Response:
The NRPC spec is accurate in defining the field as Reserved, and without
protocol significance. In the header file in our source code, it is
defined as LogonId and commented as such, but it’s effectively not used.
This is probably why the API structure has that field name. It may have
been intended as such but it’s not used.
Samba will send a random value in this field.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Originally added for BUG: https://bugzilla.samba.org/show_bug.cgi?id=13584
to demonstrate a lock order violation, this test
exposed problems in the mapping of SMB1/2 share modes
and open modes to NetATalk modes once we moved to OFD locks.
Change the test slightly (and add comments)
so it demonstrates working NetATalk share modes
on an open file.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13770
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Böhme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Feb 8 23:26:46 CET 2019 on sn-devel-144
Ensure that the provided inf defines Class=Printer for driver installation
to succeed.
Some driver packages(HP Universal Print Driver) include inf files with
other device types such as Class=USB. Attempting to install these will fail
when tested against Windows Server 2016 Print server using
iremotewinspool RPC calls.
Signed-off-by: Justin Stephenson <jstephen@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Bjoern Jacke <bjacke@samba.org>
Autobuild-User(master): Björn Jacke <bjacke@samba.org>
Autobuild-Date(master): Mon Jan 28 19:34:41 CET 2019 on sn-devel-144
Uninstall and remove the print driver packages to cleanup
after the install. Cleanup and remove smb directory created
inside print$.
Signed-off-by: Justin Stephenson <jstephen@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Bjoern Jacke <bjacke@samba.org>
Perform checks against the print driver registry information
to ensure the driver was installed as expected.
Signed-off-by: Justin Stephenson <jstephen@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Bjoern Jacke <bjacke@samba.org>
