IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The early exits from the sub-shell make the obvious successes much
more obvious, and slightly simplify the code that follows.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Handling this across two different functions led to insanity, so
simplify.
The handling of unhealthy_after when $_numfails = 0 implicitly causes
the node to be healthy. This is how the "rpcinfo succeeds" case
works. Doing it this way for statistics makes this patch easier to
read. The implicit behaviour will go away in the next patch.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The current structure here is wrong and repetitive. Checking rpcinfo
result and determining output should be in the same place.
Failure counting is now contained in
rpc_set_service_failure_response(), but needs a file to survive the
sub-shell.
Don't attempt to combine and simplify code yet. That would make this
commit harder to review.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The output file is initialised, so doesn't need to be created on
success. Treat the return code file the same way.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Nothing more complex is ever done, so we might as well simplify and
reduce coupling.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If an RPC service is given, it is automatically marked down. This
avoids repetition in test cases and loosens coupling.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Add a single line USENODESCOMMAND directive to the fake ctdb in order to
enable use of a nodes script instead of a nodes file. For simplicity
the fake ctdb always uses `nodes.sh` in the CTDB_BASE.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Similar to the recent changes to the ctdb server code, add the ability
to load the nodes from a subprocess stdout.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
In a future commit we will add support for loading the config file from
the `ctdb` command line tool. Prior to this change the config file load
func always called D_NOTICE that causes the command to emit new text and
thus break all the tests that rely on the specific test output (not to
mention something users could notice). This change plumbs a new
`verbose` argument into some of the config file loading functions.
Generally, all existing functions will have verbose set to true to match
the existing behavior. Future callers of this function can set it to
false in order to avoid emitting the extra text.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Add a "nodes list" configuration option to the [cluster] section of the
ctdb server config. This option will be used similarly to the `cluster
lock` parameter works. When unset it defaults to the same value as
before (/etc/ctdb/nodes). If given a path that is not prefixed by `!` it
instead loads the nodes file from the given path If given a path
prefixed by `!` then it executes the path as a command and reads the
standard output as if it were the content of the nodes file.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
The current fake_ctdbd code for reloading the nodes file overruns the
allocation when adding a deleted node at the end. This is a very
unlikely case, but it might as well work.
Check the size of the internal node map when marking a node deleted.
Also, update the code that adds a node to correctly set the deleted
flag when appropriate.
The included test case tests this.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Guenther Deschner <gd@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Wed Jul 17 00:06:53 UTC 2024 on atb-devel-224
There are no existing tests to exercise node IP address change
detection.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Guenther Deschner <gd@samba.org>
rpc.statd is single-threaded and runs its HA callout synchronously. If
it is too slow then latency accumulates and rpc.statd's backlog grows.
Running a pair of add-client/del-client events with the current code
averages ~0.030s in my test environment. This mean that 1000 clients
reclaiming locks after failover can easily cause 10s of latency. This
could cause rpc.statd to become unresponsive, resulting in a time out
for an rpcinfo-based health check of the status service.
Split the add-client/del-client events out to a standalone
statd_callout executable, written in C, to be used as the HA callout
for rpc.statd. All other functions move to statd_callout_helper.
Now, running a pair of add-client/del-client events in my test
environment averages only ~0.002s. This seems less likely to cause
latency problems.
The standalone statd_callout executable needs to read a configuration
file, which is generated by statd_callout_helper from the "startup"
event. It also needs access to a list of currently assigned public
IPs.
For backward compatibility, during installation a symlink is created
from $CTDB_BASE/statd-callout to the new statd_callout, which is
installed in the helper directory.
Testing this as part of the eventscript unit tests starts to become
even more of a hack than it used to be. However, the dependency on
stubs and the corresponding setup of fake state makes it hard to move
this elsewhere.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Tue Jun 25 04:24:57 UTC 2024 on atb-devel-224
When monitoring an RPC service, the rpcinfo command might time out
even though the service is making progress. In this case, it is just
slow, so counting the timeout as a failure and potentially restarting
the service will not help. The problem is determining if a service is
making progress.
Add a new NFS checks service_stats_command. This command is intended
to run a statistics command. The output is naively compared using
cmp(1). If the output changes then rpcinfo failures are converted to
successes.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This simplifies and removes a bad hack. Also, in my test environment,
it also drops the average time take to run an add-client/del-client
pair from ~0.055s to ~0.030s.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
rpc.statd runs statd-callout as a non-root user, which is currently
hacked around using some sudo logic that fails to work in some
contexts (e.g. in a container).
Use $CTDB_MY_PUBLIC_IPS_CACHE to access the node's currently assigned
public IPs, for add-client/del-client. This avoids connecting to
ctdbd when called from rpc.statd.
Also, use $CTDB_MY_PUBLIC_IPS_CACHE in other places where it makes
sense.
Connections to ctdbd are still made in the "notify" action, but this
is always run as root.
In the test code, set the PNN after public addresses setup so that the
cache of assigned IPs correctly initialised.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
This is called in a couple of places without an argument, so give it a
default.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
This is way more complicated than I would like but, as per the
comment, this is due to complexities in the way public IPs work. The
main consumer will be statd-callout, which will then be able to run as
a non-root user.
Also generate the cache file in test code, whenever the PNN is set.
However, this can cause "ctdb ip" to generate a fake IP layout before
public IPs are setup. So, have the "ctdb ip" stub generate the IP
layout every time it is run to avoid it being stale.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
All of the other uses of ctdb.tdb are in statd-callout.
New variable statd_callout_db makes it easy to change the database
name in future, perhaps even allowing it to be configurable.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Using xargs with sort -u to de-duplicate this list was my idea and
causes a couple of things to go wrong. The use of xargs causes
double-quotes to be lost. The resulting $public_ifaces value also
contains newlines. The newlines could be removed with an additional
xargs at the end of the pipeline... but that would add an extra level
of quote stripping.
I have unsuccessfully tried to find an alternative, but still elegant,
command pipeline that de-duplicates the list, while maintaining
quoting.
So, just drop the de-duplication.
This might make interface_ifindex_exists_with_options() slightly less
efficient. However, that function walks the whole list, only
terminating early when a match is found on both interface and options,
so at least it will be correct.
Include an extra testcase.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Thu Apr 18 09:08:34 UTC 2024 on atb-devel-224
This was an implementation of getline(3), use that instead.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Martin Schwenke <mschwenke@ddn.com>
Trigger a "startipreallocate" event, but only if in RUNNING runstate.
"startipreallocate" is intended to allow an NFS server to be put into
grace on all nodes before any locks are released as part of releaseip
during failover. If node A is leader and initiates a takeover run
then node B may be connected/active but may not have completed
startup. In this case, the attempt to put NFS-Ganesha into grace on
node B will fail, startipreallocate will fail, and the node will be
banned.
Signed-off-by: Vinit Agnihotri <vagnihotri@ddn.com>
Reviewed-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
rb_test_001.sh runs for 60s even though rb_tree.c is almost never
modified. This generally extends test time by an unreasonable amount
of time.
Add an optional timeout (in seconds) argument to rb_test, defaulting
to 60, and pass 5 from rb_test_001.sh. If anyone ever significantly
updates rb_tree.c then they can run rb_test directly with its default
60s timeout... or for as long as they like.
Reported-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Thu Feb 29 13:20:40 UTC 2024 on atb-devel-224
CTDB_CONTROL_TCP_CLIENT_DISCONNECTED and
CTDB_CONTROL_TCP_CLIENT_PASSED were added in commits
c6602b686b and
037e8e449d. They were missing test
support for the packet push/pull. While adding the testing (for
completeness, before adding another new control) I noticed that the
push functionality was absent. This adds that, along with the test
support.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15580
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Mon Feb 19 10:21:48 UTC 2024 on atb-devel-224
/etc/os-release is quite universal. It can be found on most Linux
distros and on FreeBSD.
Attempt to use /etc/os-release to detect Red Hat, SUSE and Debian
based distros. If /etc/os-release exists but distro is unknown then
$ID is printed as the detected distro, which will probably result in
sub-optimal behaviour, but when tracing it will at least indicate that
a new distro needs to be handled.
The only way to handle missing /etc/os-release is to set
CTDB_INIT_STYLE - see ctdb.sysconfig(5) for details.
The event script unit tests are updated to use /etc/os-release so
the new logic is exercised.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Oct 30 09:19:11 UTC 2023 on atb-devel-224
With a file "home_nodes" next to "public_addresses" you can assign
public IPs to specific nodes when using the deterministic allocation
algorithm. Whenever the "home node" is up, the IP address will be
assigned to that node, independent of any other deterministic
calculation. The line
192.168.21.254 2
in the file "home_nodes" assigns the IP address to node 2. Only when
node 2 is not able to host IP addresses, 192.168.21.254 undergoes the
normal deterministic IP allocation algorithm.
Signed-off-by: Volker Lendecke <vl@samba.org>
add home_nodes
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Tue Oct 10 14:17:19 UTC 2023 on atb-devel-224
This effectively provides simple testing for the threshold-based
approach.
Add new script option CTDB_VSFTPD_MONITOR_THRESHOLDS.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Oct 3 04:53:38 UTC 2023 on atb-devel-224
>>> CID 1539212: Control flow issues (NO_EFFECT)
>>> This greater-than-or-equal-to-zero comparison of an unsigned value is always true. "p >= 0UL".
216 while (p >= 0 && output[p] == '\n') {
This is a real problem in the unlikely event that the output contains
only newlines.
Fix the issue by using a pointer and add a test to cover this case.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15438
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Multi-line output currently prints like this:
OUTPUT: aaa
bbb
ccc
This is less beautiful than it could be.
Instead, print multi-line output with no inlining and each line
indented:
OUTPUT:
aaa
bbb
ccc
However, continue to inline single line output:
OUTPUT: foo
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
When event scripts succeed they generally produce no output. However,
when a script succeeds and produces output, such output almost
certainly contains warnings. So, always print script output.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Errors logged when testing statd-callout don't currently go anywhere.
This is because arguments to the hacked version of script_log() are
ignored.
Remove the hack and configure logging to stderr.
This could go in the local statd-callout.sh setup script. However,
make it available for other script tests.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Jul 19 09:57:37 UTC 2023 on atb-devel-224
On some platforms, egrep prints a deprecation warning to stderr:
egrep: warning: egrep is obsolescent; using grep -E
Use grep -E instead.
This is nice and simple, so no use splitting this commit into 2
separate commits for each of tools and test.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
NOTICE level debug messages in common/run_event.c are not logged by
default.
Currently eventd ends up using ERROR, since this is specified as
LOGGING_LOG_LEVEL_DEFAULT. It doesn't inherit the debug level from
ctdbd and only uses NOTICE level when interactive.
Change the real logging default to NOTICE and use it everywhere.
Followups might be:
* Remove the default_log_level argument to logging_conf_init()
* Kick eventd to update debug level when "ctdb setdebug" is used
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Wed Jul 5 12:16:57 UTC 2023 on atb-devel-224
These are all trivial, so handle them in bulk.
* Change code to avoid (approximately sorted by frequency):
SC2004 $/${} is unnecessary on arithmetic variables.
SC2086 Double quote to prevent globbing and word splitting.
SC2162 read without -r will mangle backslashes.
SC2254 Quote expansions in case patterns to match literally rather than as a glob.
SC2154 (warning): <variable> is referenced but not assigned.
SC3037 (warning): In POSIX sh, echo flags are undefined.
SC2016 (info): Expressions don't expand in single quotes, use double quotes for that.
SC2069 (warning): To redirect stdout+stderr, 2>&1 must be last (or use '{ cmd > file; } 2>&1' to clarify).
SC2124 (warning): Assigning an array to a string! Assign as array, or use * instead of @ to concatenate.
SC2166 (warning): Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
SC2223 (info): This default assignment may cause DoS due to globbing. Quote it.
* Locally disable checks:
SC2034 (warning): <variable> appears unused. Verify use (or export if used externally).
SC2086 (info): Double quote to prevent globbing and word splitting. [once]
SC2120 (warning): <function> references arguments, but none are ever passed.
SC2317 (info): Command appears to be unreachable. Check usage (or ignore if invoked indirectly).
While touching reads for SC2162, switch unused variables to "_"
instead of "_x", which seems to be preferred by ShellCheck.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
SC2059 (info): Don't use variables in the printf format string. Use printf '..%s..' "$foo".
Move the format string to the function and just parameterise the share
type.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
