IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
dashes of const. This is a rather large check-in, some things may break.
It does compile though :-).
Jeremy.
(This used to be commit 82b8f749a36b42e22186297482aad2abb04fab8a)
- Report references in smb.conf that point to non-existent entries
- Report entries that are not referenced in the list
- Report entries that are documented, but don't exist in loadparm.c
- Report entries that are in loadparm.c, but are not documented
(This used to be commit bf5a84efb36410bc07e7de91f4a926a60083bb7a)
after a given date. I use it to help update the WHATSNEW.txt for a
release.
./cvslog.pl SAMBA_2_2 '>2002-06-18' configure.in
The output is a little messy right now, but I plan to clean that up.
(This used to be commit 8812223e2a37b0d0f143fcc74c6ba85ac8081ffb)
>When creating an automatically generated prototype make sure the
>destination directory exists.
(This used to be commit 9ffca4824c9fa76ab288f59b4b57a3cdc99a93b8)
and display correctly in regedit.exe.
Not sure about REG_SZ values in PrinterDriverData. If we store these
in UNICODE, I'll have to fix up a few things.
REG_BINARY & REG_DWORD are fine.
(This used to be commit 2a30c243ec28734bbc721dfc01b743faa6f73788)
via the registry. There is a seg fault here which shouldn't
bother anyone until I can get it fixed. I just need
a check point in case I need to roll back to this version later on.
(This used to be commit e62ae94823461e142978a786b2860ea97906cfb3)
be static
very very slow ... I leave it as an exercise for the reader to make
this O(n) instead of O(n^2)
(This used to be commit 7c035d473c7175163ad5db0373ed2fe6c739b968)
cleanup some of the code in net_rpc_join re const warnings and
fstrings.
Passdb:
Make the %u and %U substituions in passdb work.
This is done by declaring these paramters to be 'const' and doing
the substitution manually. I'm told this is us going full circle,
but I can't really see a better way.
Finally these things actually seem to work properly...
Make the lanman code use the pdb's recorded values for homedir etc
rather than the values from lp_*()
Add code to set the plaintext password in the passdb, where it can
decide how to store/set it. For use with a future 'ldap password
change' option, or somthing like that...
Add pdb_unix, so as to remove the 'not in passdb' special cases from the
local_lookup_*() code. Quite small, as it uses the new 'struct passwd ->
SAM_ACCOUNT' code that is now in just one place. (also used by pdb_smbpasswd)
Other:
Fix up the adding of [homes] at session setup time to actually pass
the right string, that is the unix homedir, not the UNC path.
Fix up [homes] so that for winbind users is picks the correct name.
(bad interactions with the default domain code previously)
Change the rpc_server/srv_lsa_nt.c code to match NT when for the
SATUS_NONE_MAPPED reply: This was only being triggered on
no queries, now it is on the 'no mappings' (ie all mappings failed).
Checked against Win2k.
Policy Question: Should SID -> unix_user.234/unix_group.364 be
considered a mapping or not? Currently it isn't.
Andrew Bartlett
(This used to be commit c28668068b5a3b3cf3c4317e5fb32ec9957f3e34)
directory so we don't keep getting these stupid error messages about
incorrect size for valid.dat upcase.dat and lowcase.dat
(This used to be commit 4af0c7a93f626dde33fd737618c2b786f83046c7)
into its own. The 'installdirs' makefile entry didn't do anything on my laptop,
so it has been replaced with the section from installbin.sh.
This also fixes the bug that we ignored the setting of $(PRIVATEDIR) when
making the directories.
Finally, link pam_winbind with .po objects only, not a mix of .o and .po
(as per Don Mccall's request).
Andrew Bartlett
(This used to be commit c7a883df28da9dd6fb88198df22c4d78bf8acd8b)
degree of seperation betwen reading/writing the raw NamedPipe SMB packets
and the matching operations inside smbd's RPC components.
This patch is designed for no change in behaviour, and my tests hold that to be
true. This patch does however allow for the future loadable modules interface
to specify function pointers in replacement of the fixed state.
The pipes_struct has been split into two peices, with smb_np_struct taking the
information that should be generic to where the data ends up.
Some other minor changes are made: we get another small helper function in
util_sock.c and some of the original code has better failure debugs and
variable use. (As per on-list comments).
Andrew Bartlett
(This used to be commit 8ef13cabdddf58b741886782297fb64b2fb7e489)
- gss error code patch from a.bokovoy@sam-solutions.net
- better sid dumping in ads_dump
- fixed help in wbinfo
(This used to be commit ee1c3e1f044b4ef62169ad74c5cac40eef81bfda)
activate you need to:
- install krb5 libraries
- run configure
- build smbclient
- run kinit to get a TGT
- run smbclient with the -k option to choose kerberos auth
(This used to be commit d33057585644e1337bac743e25ed7653bfb39eef)
used by SWAT into $swatdir/$ln/{help,images,include}
we have still points which needs to discuss, that is how to archive
and install lots of HTML help files and Using Samba files.
-- monyo
(This used to be commit 9ec2d5e96ebb907e66250772057bf5e2601f8ec9)
TO enable configure with --with-i18n-swat
to support this gettext is integrated
and a new directories name "po" and "intl" are created.
now these languages are supported:
en - English (default)
ja - Japanese
po - Polish
tr - Turkish
To add your language,
to create ${your_language}.po by translating source/po/en.po
into your language is needed.
some of html and image files of various language version are not
included yet, though message catalogue files are installed.
you need to copy files manually under
${swatdir}/lang/$ln/{help,images,included,using_samba}
And also added a option to intall manual pages:
of various lang version
To enable configure with --with-manlangs
but manual pages themself are not included yet.
(This used to be commit 486b79a6fc4ba20a751aab544bd0f7ccff2b3d19)
replacemnt of stdio that doesn't suffer from the 8-bit filedescriptor
limit that we hit with nasty consequences on some systems
I would eventually prefer us to have a configure test to see if we need
to replace stdio, but for now this code needs to be tested widely so
I'm enabling it by default.
(This used to be commit 1af8bf34f1caa3e7ec312d8109c07d32a945a448)
- added WERROR for win32 error codes
- added a configure test for immediate structures
still lots to do, so its not enabled by default, but the main
structure is there
(This used to be commit 24f9ab683dec52587ee56717e821b49c0fa3d70f)
major changes include:
- added NSTATUS type
- added automatic mapping between dos and nt error codes
- changed all ERROR() calls to ERROR_DOS() and many to ERROR_NT()
these calls auto-translate to the client error code system
- got rid of the cached error code and the writebmpx code
We eventually will need to also:
- get rid of BOOL, so we don't lose error info
- replace all ERROR_DOS() calls with ERROR_NT() calls
but that is too much for one night
(This used to be commit 83d9896c1ea8be796192b51a4678c2a3b87f7518)
This commit gets rid of all our old codepage handling and replaces it with
iconv. All internal strings in Samba are now in "unix" charset, which may
be multi-byte. See internals.doc and my posting to samba-technical for
a more complete explanation.
(This used to be commit debb471267960e56005a741817ebd227ecfc512a)
it will avoid problems with lists being longer than 1024 bytes
just now only ip list parameters have been converted to the new type
(hosts allow, hosts deny, ssl hosts, ssl hosts resign)
(This used to be commit e1572f85d6247b760db10825b2fa688d7ed50bd3)
- cleaned up GNUC printf attribute macros
- added enum handling in mkproto
- removed non-vararg code
- made slprintf and vslprintf just macros for snprintf and vsnprintf
- don't need slprintf code any more
(This used to be commit c7aeb2254dfc3cd0aa0b6c0bdd426f9323be0ddf)
