IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
32-bit and 64-bit versions.
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Jul 2 03:02:47 CEST 2012 on sn-devel-104
Their AC_TRY_RUN doesn't include any current CPPFLAGS. Make
the set[res]uid checks independent of this. Needs a small
change to the waf build in order to code with the change.
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Jun 30 00:32:36 CEST 2012 on sn-devel-104
This should fix the waf build on AIX, which has a splice symbol.
metze
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Mon Jun 18 11:43:01 CEST 2012 on sn-devel-104
auth_netlogond was an important module in the development of the
combined Samba 4.0, and was the first module to link smbd with the AD
authentication store, showing that it was possible for NTLM
authentication to be offloaded to the AD server components.
We now have auth_samba4, which provides the full GENSEC stack to smbd,
which also matches exactly the group membership and privileges
assignment and which is supported and tested as part of the official
Samba 4.0 release configuration.
Andrew Bartlett
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sat Jun 16 10:13:20 CEST 2012 on sn-devel-104
pdb_ads was an important module in the development of the combined Samba 4.0, and
was the first module to show that standard samba3 tools such as smbpasswd can be
made to operate on the sam.ldb.
We now have pdb_samba4, which operates directly on the sam.ldb, rather than via
ldapi://, which uses transactions and which is supported and tested as part
of the official Samba 4.0 release configuration.
This module is not as complete (for example, it does not honour the idmap
configuration) and requires that the samba binary be running to operate.
Andrew Bartlett
Some early Linux 2.6 platforms can not handle sendfile and _FILE_OFFSET_BITS == 64
This disables sendfile() on these platforms.
Andrew Bartlett
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sat Jun 16 02:21:28 CEST 2012 on sn-devel-104
This makes the code and output for in waf and autoconf identical.
Andrew Bartlett
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Jun 7 08:35:33 CEST 2012 on sn-devel-104
With this change, the define to check for AIO is HAVE_AIO, consistant
with other subsystems.
It is now also on by default in the autoconf build, as it has been for waf.
Andrew Bartlett
We simply do not need this library any more.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Sun May 27 11:08:22 CEST 2012 on sn-devel-104
System MIT krb5 build also enabled by specifying --without-ad-dc
When --with-system-mitkrb5 (or --withou-ad-dc) option is passed to top level
configure in WAF build we are trying to detect and use system-wide MIT krb5
libraries. As result, Samba 4 DC functionality will be disabled due to the fact
that it is currently impossible to implement embedded KDC server with MIT krb5.
Thus, --with-system-mitkrb5/--without-ad-dc build will only produce
* Samba 4 client libraries and their Python bindings
* Samba 3 server (smbd, nmbd, winbindd from source3/)
* Samba 3 client libraries
In addition, Samba 4 DC server-specific tests will not be compiled into smbtorture.
This in particular affects spoolss_win, spoolss_notify, and remote_pac rpc tests.
With PROCESS_SEPARATE_RULE in wafsamba it is now possible to simplify
configuration and checks for MIT/Heimdal Kerberos implementations.
1. Move MIT krb5 checks from source3/wscript to wscript_configure_krb5
2. Make sure they are called same way (--with-mit-krb5-checks)
3. If no configure checks identified MIT krb5 in system (or were disabled),
make sure Heimdal build is selected, embedded (default) or system-provided.
This makes logic of configuration unchanged for Heimdal builds but adds
less hacky way to use MIT krb5 builds. The latter does not work yet as we
need to untangle more subsystems from HDB/Heimdal-specific details but
lays out a foundation for that.
Signed-off-by: Simo Sorce <idra@samba.org>
sys/inotify.h was added to glibc 2.4 in 2006.
Signed-off-by: Jeremy Allison <jra@samba.org>
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Fri Apr 13 21:15:00 CEST 2012 on sn-devel-104
on a 32-bit system and defined as a long, then inside vfswrap_get_alloc_size()
we cast to a uint64_t. This sign-extends when converting to unsigned,
so if the high bit of st_ex_blksize is set we return insane values to clients.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Tue Apr 3 19:19:33 CEST 2012 on sn-devel-104
This is a module that, like vfs_xattr_tdb, stores extended attributes
in a DB on disk. This uses the format needed to support the
posix:eadb smb.conf option.
Andrew Bartlett
With --export-dynamic flag on OpenBSD 5.x, extra symbols get added in the
data segment which causes ABI generation script to fail.
Autobuild-User: Amitay Isaacs <amitay@samba.org>
Autobuild-Date: Fri Mar 16 16:04:31 CET 2012 on sn-devel-104
This matches the autoconf build, and should partially address bug #8709.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Thu Mar 15 01:12:15 CET 2012 on sn-devel-104
This reverts commit 74abe369df.
Having gsskrb5_extract_authz_data_from_sec_context as symbol in the
library is in indicator that gss_inquire_sec_context_by_oid() would work.
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Wed Jan 25 05:26:14 CET 2012 on sn-devel-104
This library was tiny - containing just two public functions than were
themselves trivial. The amount of overhead this causes isn't really worth the
benefits of sharing the code with other projects like OpenChange. In addition, this code
isn't really generically useful anyway, as it can only load from the module path
set for Samba at configure time.
Adding a new library was breaking the API/ABI anyway, so OpenChange had to be
updated to cope with the new situation one way or another. I've added a simpler
(compatible) routine for loading modules to OpenChange, which is less than 100 lines of code.
Autobuild-User: Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date: Sat Dec 3 08:36:33 CET 2011 on sn-devel-104
Therefore, do not bother doing an autoconf test looking for it.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Wed Nov 30 00:08:18 CET 2011 on sn-devel-104
Enable inotify if sys or kernel inotify is available.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Mon Nov 7 16:28:38 CET 2011 on sn-devel-104
This module overloads the SMB_VFS_GET_DFS_REFERRAL() hooks,
in order to support the domain, dc and sysvol referrals
for a AD DC.
The config would look like this:
[IPC$]
vfs objects = dfs_samba4
metze
The s3-waf build system is a key component of the top level build, but
with this commit is is no longer available directly. This reduces the
number of build system combinations in master as we prepare for the
Samba 4.0 release.
Andrew Bartlett
These modules are now known to be faulty, and Samba 3.6.0 didn't
include support for them, so we now require a system iconv if you wish
to support these character sets for the non-ASCII range.
Andrew Bartlett
For autoconf builds these remain as modules, for waf builds they are
built into the charset library.
This is required to provide the CP850 charset when iconv is not available.
The charset modules static for the waf builds because with proper
shared libs, there isn't the same need for these to be in seperate .so
files. The modules are also not produced if a system iconv is found,
except for developers, to allow testing of both code paths.
Andrew Bartlett
the parameters to conf.CHECK_FUNCS_IN were in the wrong order
Autobuild-User: Christian Ambach <ambi@samba.org>
Autobuild-Date: Thu Jul 21 16:49:52 CEST 2011 on sn-devel-104
This merge finally makes --with-logfilebase=foo and friends work appropriately.
Andrews, Andreas, please check.
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Tue Jun 28 17:54:42 CEST 2011 on sn-devel-104
This ensures that the translations and any embedded strings are in the
same charset. It won't be the one from the user's locale (we no
longer auto-detect that), but it will be self-consistent.
Thanks to Steve Langasek for pointing this function out!
Andrew Bartlett
In the past, our LOCALE would set the display charset of Samba. The
display charset has now been removed. This patch removes the support
code that detected the locale from the environment. We cannot safely
have 'unix charset' follow the locale (at it creates files on disk and
entries in databases that must not vary), so this code is unused.
As an example, imagine a database is manipulated in the
administrator's locale, and then read by smbd starting up in the
system default locale. Or smbd restarted by the administrator rather
than a startup script. Both of these situations could corrupt
databases or filenames on disk.
Andrew Bartlett
We change all the headers and wscript files to use tdb_compat; this
means we have one place to decide whether to use TDB1 or TDB2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This uses direct LDB operations and calls to the dsdb library to allow
passdb operations (such as pdbedit and smbpasswd) offline, and uses
transactions internally for database consistency.
Pair-Programmed-With: Andrew Tridgell <tridge@samba.org>
I'd like Samba to use the native OpenLDAP and MIT Kerberos libs.
Attached are some patches to do that. (relative to git master)
It does not build for me without these.
(OpenIndiana is an off-shoot of OpenSolaris See http://www.openindiana.org)
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Sat May 7 02:20:14 CEST 2011 on sn-devel-104
Volker, can you please check this is correct ?
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Wed May 4 19:03:45 CEST 2011 on sn-devel-104
This means that we control the connection setup, don't rely on signals
for timeouts and the connection uses socket_wrapper where that is
required in our test environment.
According to bug reports, this method is also used by curl and other
tools, so we are not the first to (ab)use the OpenLDAP libs in this
way.
It is ONLY enabled for socket_wrapper at this time, as this is the
best way to get 'make test' working for S3 winbind tests in an S4
domain.
Andrew Bartlett
Not all kerberos distributions have this function.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Wed Apr 27 07:39:08 CEST 2011 on sn-devel-104
This is constant data according to the man pages I find for this
fucntion, and causes a segfault to free() when linked to Heimdal. I
am advised that while it is constant for gss_mech_krb5, it may not be
for other mechanisms, so an assert will ensure this is dealt with by
the programmer who extends this code in future.
Andrew Bartlett
This only works for Heimdal and MIT Krb5 1.8, other versions will get
an ACCESS_DEINED error.
We no longer manually verify any details of the PAC in Samba for
GSSAPI logins, as we never had the information to do it properly, and
it is better to have the GSSAPI library handle it.
Andrew Bartlett
vfsops struct on Tru64 has a vfs_init function pointer.
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Fri Apr 22 01:49:59 CEST 2011 on sn-devel-104
This Heimdal function does not set the global state, and allows the
GSSAPI server to progress further when compiled against Heimdal (such
as in the top level build).
The ability to specify a keytab has been removed from the API as it is
unused, and and the Heimdal function (avoiding setting global
variables) works with an open keytab.
Andrew Bartlett
The autoconf check for netgrent headers makes sure that the compiler flag used
(-Werror-implicit-function-declaration) is recognized by the compiler before
using it for the test. Mimic this behaviour in the waf checks.
Thanks to gd for noticing this.
Signed-off-by: Günther Deschner <gd@samba.org>
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Mon Apr 18 16:24:15 CEST 2011 on sn-devel-104
This requires a small rework of the build system to ensure that the
correct #define statements are made in both the s3 and top level
builds. We now define the various HAVE_ macros in config.h at all
times, using heimdal_build/wscript_configure when that is in use.
Andrew Bartlett
The checks are roughtly taken from the autoconf ctdb checks.
I was not able to implement checks with CHECK_DECL, CHECK_TYPE,
CHECK_HEADER and friends, because the ctdb headers seem to need too
special a setup of includes and defines in order to compile.
So I used CHECK_CODE() in all checks.
In the long run, this should be changed.
I supported a --with-ctdb-dir options to allow for building
against a ctdb that is not installed into /usr (e.g. against
a local git checkout). In order to implement this, I had to
hand includes in to the CHECK_CODE function.
Here I found a problem with CHECK_CODE (or even the core waf
conf.check() function: The CHECK_CODE function does not
expand the includes it gets (i.e. '#' is not expanded to the
base dir, and relative paths are left relative). But the core
check() function seems to ignore all include paths that are
not absolute paths. Hence in particular the usual default '# .'
for the includes is useless. So I preprocessed the list of includes
for the cluster checks. But I assume that it would be useful
to move this expansion into CHECK_CODE or even into the core
waf check function.
Autobuild-User: Michael Adam <obnox@samba.org>
Autobuild-Date: Sat Apr 2 03:26:55 CEST 2011 on sn-devel-104
When getgrouplist() is not defined, use getgrset() if it is defined
instead of using the initgroups() + getgroups() combo
Major contributions from Yannick Bergeron <yaberger@ca.ibm.com>
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Sat Mar 19 10:09:38 CET 2011 on sn-devel-104
We build pam_smbpass independent from this configure option though.
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Thu Mar 17 14:52:33 CET 2011 on sn-devel-104
"cups-config --libs" returns -lgssapi_krb5, which ties it to the
system krb5 library. It should get this via the indirect dependency of
libcups.so instead.
Work around this by using 'cups' as the library and avoid using --libs
in the cups-config command
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
this fixes the extra global includes for the s3 waf build to be
conditional on whether talloc, tevent and tdb are system libraries or
not.
This fixes a problem where in-tree includes could be used with system
libraries
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Our binaries did not export symbols so e.g. smbd could not load vfs modules.
Patch from tridge.
We might remove this later on, once we decide to resolve all symbols and fix all
dependencies in s3 modules.
Guenther
This finally allows mixed case module names like the classic build
(./configure --shared_modules=charset_CP850)
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Wed Dec 1 18:39:14 CET 2010 on sn-devel-104
if you use --git-local-changes then the version number that waf
extracts from git will have a '+' on the end if you have local
changes, as determined by running 'git diff'.
This used to be the default, but unfortunately it is far too slow on
some systems. On a NFS build system I was using the first line of
configure took about 2 minutes.
Autobuild-User: Andrew Tridgell <tridge@samba.org>
Autobuild-Date: Tue Nov 16 01:51:54 UTC 2010 on sn-devel-104
This adds two callback function for each rpc service. One is for
initialisation and the other for shutdown. rpc_<service>_unregister()
needs to be called to execute the shutdown function.
