IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
DFLT_SERVER_TYPE in nameserv.h
- got rid of a lot of spurious domain controller stuff. Samba is not a
domain controller yet, but it can be a domain master. We were claiming
to be a domain controller in some packets which may have caused
problems
- don't do preferred master startups on the WINS pseudo-net
- don't do election requests on the WINS pseudo-net
- fix a nasty bug in become_non_master() which wiped out the bits in
remove_type before using them. The result was that samba didn't like
losing its master status.
- changed the logic in the election packet handling to enable us to
become a non-master whenever we receive a winning election frame, even
if we aren't expecting it
- get another packet from the socket in nmbd when we reject one of our
own packets, this stops us from going into the packet reading code too
often and makes nmbd much snappier
- always remove a name immediately when we try to release it, don't
wait for the lack of response from the network, otherwise we will end
up replying to name that we don't really own. We still send the dereg
packets, we just don't wait for them to time out.
(This used to be commit eb84f2f342)
correctly if there were multiple instances of a name. This led to the
infamous "not enough memory" error when browsing (but this isn't the
only cause of that message)
- fix a triple-chaining bug which affected OpenX following a TconX
- fix a serious nmbd bug that meant nmdb would answer packets that it
wasn't supposed to, causing havoc with browse lists.
- never time out SELF packets. This is an interim fix until I find out
why nmbd thought they should be timed out.
(This used to be commit 2960c3908c)
that samba uses possible
- added "socket address" option to allow virtual SMB servers (on
systems with IP aliasing line Linux)
- disabled FAST_SHARE_MODES by default in Linux as older Linux boxes
can't do shared writeable mappings. We really need autoconf ...
- added new option types in loadparm so a string type can be specified
ot be uppercase only, this is used for the workgroup and netbios name
options
- auto-create the lock directory if it doesn't exist in shared mem
startup
- get rid of announce_backup()
- change a few comments in nmbd code
- rewrote the chaining code completely. Hopefully it will handle any
depth chains now.
- added LPRng support
(This used to be commit e9eac6cd49)
- you can now press enter after a password prompt with "smbclient -L
hostname" and it will use a blank username and password, the same as
if you used -U%
- changed the wins.dat store code to not go via a string variable
(just use fprintf instead)
- removed a "unsigned long" that luke put back in, changing it to
uint32 to keep 64 bit machines happy. Naughtly luke!
- allow guest non-connnected print queue listings so ms client 3 can
work
(This used to be commit 917160dee6)
- changed the order of PROGS and SPROGS in Makefile (SPROGS first)
- another 64 bit cleanup (for INADDR_NONE)
- added paranoia code in DirCacheAdd() to detect looping
- fixed important DirCache flush bug
- rewrote the NetServerEnum code after I found it could return servers
from multiple workgroups at once, and this could cause browsing
havoc. Now a null workgroup query is equivalent to a query for the
servers primary workgroup
- got rid of my_workgroup()
- got rid of "workgroup = *" comment in Makefile. We no longer support
a workgroup of *, users must set the workgroup explicitly
- the wins.dat file was being stored in a different format to what it
was being loaded in - this could cause havoc. fixed.
- uppercase our netbios name and the workgroup name at startup
- if accept fails in main loop when running as a daemon then continue,
don't just exit!
- don't use ./ on smbclient in smbtar
- better code to detect if a process exists
(This used to be commit ec3d539630)
Bressler)
- machten support from Trevor Strohman (trev@figment.tenon.com)
- added qinfo command to client as part of drag-and-drop printer
support for win95 from David Chappell <chappell@mouse.cc.trincoll.edu>
He also added the "printer driver" option
- use sigblock() on more systems and use sigsetmask(0) instead of
sigunblock() as its more portable. This beats a problem with zombies
on heavilily loaded systems.
- added internals.doc written by David Chappell into the source tree
- get rid of PRINT_COMMAND options from local.h as they are no longer
relevent
- new kanji code from Fujita
- don't set the recursion_available flag on queries in nmbd
- fix a potential bug with pointer subtraction in printing.c
- got rid of error_count code as the real fix (the EOF problem) is now
in
(This used to be commit aa6f8b04d1)
lewis2@server.uwindsor.ca. rest of this patch to follow.
bug in interface.c - uninitialised pointer.
nmbd has 0x20 as well as 0x0 NetBIOS name when lmhosts entry is added.
lkcl
(This used to be commit 2b9475cc5f)
is now performed in stages: wait for each NetBIOS name to be
successfully registered before proceeding to the next stage.
tied implicit name registration and release (broadcast method) to the
same piece of code as explicit method (via WINS server).
created special_browser_name() function that checks __MSBROWSE__
name: this name is ignored by WINS servers apparently.
fixed likely incompatibility between refresh_my_names() and add_my_names().
(netbios entries were unlikely to be refreshed).
NOTE: none of these changes have been tested. at all.
lkcl
(This used to be commit 7719fb0652)
also added paranoid code in the main process() loop of smbd to detect
when smbd is looping uselessly. This should stop the "smbd is chewing
lots of cpu" reports
(This used to be commit 8e9dce34d5)
prototypes automatically using "make proto". This is much less prone
to error than the old method of manually adding prototypes
(This used to be commit b551dc98f7)
- fixed problem with installscripts if srcdir is not set
- fixed ptr init bug in interface.c
- changed default lookup type in nmblookup to match nbtstat under NT
- new quotas fixes for sunos and solaris
(This used to be commit e775576f02)
- added iface_count() and iface_n_ip() routines so its easy to loop
over the local interface list
- made readsize a normal loadparm global
- check for null w in add_domain_entry()
- set the deathtime to time()-1 for doamin entries with servertype==0
This allows servers that are shutting down to be removed
- add the 0x1c name at startup if we are a WINS server. Previously we
added it only if we were a master
- loop over interfaces in add_my_domains(), so people don't have to
have a lmhosts file to get lp_workgroup() on all interfaces
- set add to True for find_workgroupstruct() in nmbsync, and check for
null return
- remove some ugly "errno = EBADF" bits. they just confused things.
(This used to be commit 88b191b488)
and Netmask, instead replacing them with calls to routines in
interface.c
- got rid of old MAXINT define
- added code to ensure we only return one entry for each name in the ipc
enum routines
- added new_only option to add_netbios_entry() to prevent overwriting
of important names
- minor time handling fixup
(This used to be commit 7ed71b73ae)
- added dir_check_ftype() to clean up the file type checking a bit
- added check for libc version >= 5 for setfsuid() for Linux
- moved the AM_MASTER() and related macros to nameserv.h
- added proper defines for the various netbios announce types
- don't call the announce_backup() code, as I'm pretty sure its wrong
it sent ANN_GetBackupListReq packets as broadcasts, they are supposed
to be used only by clients to the master browser to find a list of
available backup servers to remote a netserverenum to, I don't think
nmbd should ever send one.
- fixed a bug in the browse list writing
- minor debug cleanups
- put in the code to discard our own broadcasts (it won't work for
multi-homed hosts though)
- changed ELECTION_VERSION to 1 so we can be beaten by a NT 3.51 server by
lowering the os level.
- only do sync_browse_lists() if we are the master browser, otherwise
we'll cause network overload
- don't call tell_become_backup() as it appears to be badly broken, it
should only be used when the machine being told has its MAINTAIN_LIST
to to auto. Not calling it does no great harm anyway
- fix a nasty bug where becomebackup was confused with reset browser!
- make setbuffer() not get caught by the auto protototypes
(This used to be commit cfbad9b082)
The biggest thing is the integration of Lukes new nmbd. Its still
largely untested, so we will really need some feedback
I've also added auto prototype generation and cleaned up a lot of
minor things as a result
(This used to be commit 0d8dcfa13c)
- added setfsuid() support (for Linux)
- started adding some of Lukes changes, just the loadparm and ipc ones
so far
(This used to be commit 72543810ce)
- add faq info on NT printer handling
- add "delete readonly" option to help rcs users
- add stuff to man pages on new printer options
- add "proxy name resolution" option
- add "command string" -c option to smbclient (thanks Ken)
- split time functions into time.c
- rearrange the quotas stuff a bit and fix some bugs
- complete rehash of the time handling code thanks to Paul Eggert
- fix nmblookup output a bit
- add plp print queue parsing from Bertrand Wallrich
(This used to be commit 635b56f19c)
