IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The goal is to pass the raw protocol testsuite against s3 RPC server.
To do so we need to enable epmd and lsasd daemons, as the testsuite
connects to the endpoint mapper and lsa endpoints using NCACN_IP_TCP
and NCACN_NP transports.
Signed-off-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This is fairly cheap and it is simple to do. This allows the Python
code to be able to specify a unclist quite simply. The level of
coupling doesn't seem worse than anything else in the
selftest/autobuild code.
There may be cleverer ways of doing this (e.g. a wrapper in
testprogs/blackbox/clusteredmember_smbtorture or similar) but cleverer
code isn't necessarily better code... and they'll probably involve
code duplication.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Allow running tests against a CTDB setup, thereby covering the
dbrwap_ctdb->ctdb stack in real SMB tests.
Sets up a 3 node cluster.
Signed-off-by: Michael Adam <obnox@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Martin Schwenke <martin@meltin.net>
So just run it "as root" all the time.
Something similar is already done for other things in
Samba3::provision(), such as running smbpasswd in
Samba3::createuser().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Default to closing the write end of the parent->child pipe.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
If $nmbd is not "yes" then this can result in a warning.
Introduced in commit 676261fa08.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Feb 18 21:07:44 UTC 2020 on sn-devel-184
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Feb 14 20:16:04 UTC 2020 on sn-devel-184
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
These methods are being called but have not been provided.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
To fix a warning.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The character ':' has no meaning in function signatures. Perhaps ';' was
intended, which would have marked the later arguments as optional --
which is the default with no signature. All callers always provide all
the arguments anyway.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
If the SOCKET_WRAPPER_PCAP_DIR is not defined, let's assume it wasn't
wanted rather than choosing /.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The '%ret = {}' construction was bad because '{}' is a hash-ref, which
counts as a single scalar value, but a true hash like '%ret' must be
initialised with an even number of scalar values (usually in pairs, like
'($a => $b, $c => $d)').
I think this meant %ret was initialised as something harmless like
'(<HASH(0x55ce39781278)> => undef)'.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
None of these ones are doing any harm, we just want to silence these
warnings.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We were declaring the same variable twice with two different paths,
"$cadir/Users/$pkinitprincipalname" here and
"$ctx->{prefix_abs}/pkinit" about 5 lines down.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
After this we will see more noise with each test run, and these
warnings will be addressed in following commits.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Without this, teardown_env() will take ages for environments with
skipped daemons
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Jan 29 11:06:53 UTC 2020 on sn-devel-184
Without this, any environment that skips any daemon will not shut down
properly. If a copy of a pipe's write end remains, closing one of them
won't cause the read end to be readable, i.e. the daemons waiting for
that won't exit properly.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
9 positional parameters is a bit too much for easy overview
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Dec 20 07:34:42 UTC 2019 on sn-devel-184
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-programmed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We don't need any substitution for elasticsearch options.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14106
Signed-off-by: Isaac Boukris <iboukris@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This demonstrates that can do krb5_auth in winbindd without knowning about trusted domains.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14124
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Tue Sep 24 19:51:29 UTC 2019 on sn-devel-184
This demonstrates that we rely on knowning about trusted domains before
we can do krb5_auth in winbindd.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14124
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
This removes some quite complex logic that has not been used since the LDAP
backend project was shelved prior to 2011.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Nadezhda Ivanova <nivanova@symas.com>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Aug 22 21:24:00 UTC 2019 on sn-devel-184
This is the current default and what 'make test' assumes currently.
The next commit will change the default to "illegal".
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This is the current default and what 'make test' assumes currently.
The next commit will change the default to disable SMB1.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This is the current default and what 'make test' assumes currently.
The next commit will change the default to disable SMB1.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Remove the sub domain option from join, as it currently does not work.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Jul 1 23:21:07 UTC 2019 on sn-devel-184
Now that File-ID calculation goes through the VFS, we can nicely make a
per-share option out of it.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We're going to change the default base schema so this patch changes all
tests and testenvs requiring the current default (2008_R2) to specify it
in all provision commands using --base-schema.
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
When creating the customdc, testparm would default to using
/usr/local/samba sub-directories for creating sockets and lock files.
Instead, pass in the tmpdir we just created as an option to the command.
Normally this didn't cause a noticeable problem, however, if we run the
command with UID-wrapper but without socket-wrapper (i.e.
USE_NAMESPACES=1), then it fails completely.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri May 31 06:34:36 UTC 2019 on sn-devel-184
If we couldn't determine the realm/domain from the backup file, it's a
lot nicer to fail early with a clear error message (rather than failing
later on with a really obscure message).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This hooks up the selftest/ns/* scripts added earlier with the selftest
system, so developers can optionally run a testenv or test using linux
namespaces instead of socket-wrapper.
The idea is this is experimental functionality that we can extend
further in future, in order to make testing Samba more versatile.
+ The top-level WAF script now does an 'unshare' to create a new
top-level 'selftest' namespace in which to create the testenv(s).
+ selftest.pl creates a common 'selftest0' bridge to connect together
the individual DCs.
+ Update Samba.pm so it can use real IPs instead of loopback addresses.
In fork_and_exec(), we add a couple of hooks so that the binary gets
started in a different namespace (using unshare/start_in_ns.sh), and
the parent process connects the new child namespace up to the common
selftest0 bridge (using add_bridge_iface.sh).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We store the testenv directory path for the 'ctx' hashmap, but not for
the testenv-vars hashmap (and that can be really annoying sometimes).
Add it into the second hashmap that selftest actually keeps track of.
Currently it's only stored in the hashmap, not actually exported as an
environment variable (but we could easily do that if a test-case need
this info).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The selftest code typically stores hashmaps as scalar variables (i.e.
it only ever uses references to hashmaps). So much so that using a regular
hashmap (and passing it by reference via \%daemon_ctx) looks out of
place.
Using the hashmap directly made more sense when it was only being used
locally, but now the hashmap is being passed by reference into a function
anyway, so storing it as a scalar doesn't make much difference.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Now the code has been refactored, we can move it into a common function.
This reduces code duplication and means we have a common place where we
start samba daemons from.
Note that some daemons behave slightly different, but the $daemon_ctx
allows us to customize their behaviour a bit.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Final refactor to merge the fork-and-exec code into a common function.
We can now use $daemon_ctx{ENV_VARS} to customize differences between
the forked binaries:
- samba: add in extra env variables on top of the defaults.
- dns_hub: there are no ENV variables we need to export.
- winbindd/smbd: these use the defaults, so they pass through an
undefined $daemon_ctx{ENV_VARS} (purely to make the code common across
all 5 places).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Instead of having a special $skip_resolv_conf parameter just for nmbd,
use the get_env_for_process() API and customize the hashmap returned.
Pass the customized hashmap in as an optional part of the daemon_ctx.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This intermediary refactor adds a hashmap that stores the values needed
to run each samba daemon. This adds a bit more code in the short term,
but it basically means the code in 5 different places now becomes
identical, and we can extract it out to a common function.
The converting FULL_CMD from an array reference back to an array is a
bit ugly, but we can clean this up a bit once the code is all in one
place.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The s3 daemons all basically use the same command logic, it's just they
use slightly different environment variables.
This adds a common helper function, which we can pass the specific
environment variables into.
(Note the slight parameter difference for winbind with --stdout vs
--log-stdout).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This is a fairly simple move of code and is the first step in a larger
refactor.
It doesn't matter if we build up the command args prior to the fork (we
only use them in the forked child). But moving the code means the code
to handle the fork-and-exec becomes common code that is repeated in
several places throughout Samba3.pm and Samba4.pm.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Whenever we started a process, we basically used the same code to setup
the ENV variables.
The s4 ENVNAME may now be slightly different in the child process that
runs samba (i.e. '$testenv.samba'), but that ENV var did not appeared to
be used much.
I'm not sure if the current difference in $skip_resolv_wrapper logic for
nmbd was deliberate or accidental, but I've preserved the logic for now.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
fl2008r2dc already has a trusted domain. That will be used to use
idmap_ad for querying idmap attributes from the trusted domain.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13903
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is needed because the name of the autobuild job and
the name of the selftest env end up in the socket path
for ncalrpc sockets.
The challenge is that (for example)
/memdisk/autobuild/fl/b2424063/samba-schemaupgrade/bin/ab/schemaupgrade_pair_dc/ncalrpc/np/protected_storage
does not fit in a struct sockaddr_un.
Signed-off-by: Garming Sam <garming@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Apr 12 05:41:36 UTC 2019 on sn-devel-144
This adds a new 2-DC testenv that:
1. Provisions an AD DC with 2008R2 schema
2. Joins another AD DC with 2008R2 schema
3. Starts Samba
4. Performs a live schema upgrade on the PDC
Testenv targetting in tests.py files for this testenv required that we
extend the environment dependencies system to include optional post-startup
dependencies specified in ENV_DEPS_POST maps.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
The assumption that tests only used the .11 IP was wrong. The
winsreplication test tries to use multiple different IPs - CI doesn't
fail when we remove the additional IPs, but it starts to skip test
cases.
+ Update get_interfaces_config() and get_ipv4_addr() so we can add
multiple different IPs for the same host.
+ Update selftest.pl so the client gets 6 IP addresses.
+ Update comments to better reflect this dependency.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
If built with system MIT krb5 and dns_lookup_kdc is set to false in
system krb5.conf tests fail because KDC is not found.
Pair-Programmed-With: Andreas Schneider <asn@samba.org>
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
The same tests as for the other modes xdr and ndr are marked as
knownfail.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
These are only used within the function, and there's already a local
variable that stores the same info.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Setting up a testenv involves populating 2 different hashmaps - an
intermediary one (usually called 'ctx') and one that is used to populate
the testenv environment variables (usually called 'env_vars' or
'dcvars').
Because the dns_hub setup is very simple, it doesn't need two different
hashmaps. However, the variable names are still a mix of the two
hashmaps.
This patch updates dns_hub to use the second, more finalized hashmap
variable-names.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Add a helper function to return the IPv4/IPv6 addresses for the
smb.conf. This keeps the netmask assumptions in the same places as
the IP subnet assumptions.
This refactor means we no longer need to store $ctx->{interfaces}, as it
was only used in one place.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
I can't see anything in the tests that ever tries to use these other IP
addresses. While it makes sense that we might want the tests to simulate
multiple different clients (with different IPs), we don't appear to do
this currently.
Removing the spare client addresses minimizes the number of hard-coded
IP addresses in selftest.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This writes out the environment variables that are normally setup in the
testenv xterm to a file. This allows them to be sourced later.
This function is currently unused. However, it provides an alternative
replacement for the selftest-vars.sh script (which is really out of
date). I do plan to make use of this function in a subsequent patch-set.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This brings it closer to the code that actually sets these variables
(i.e. Samba3/4.pm).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This should make it clear at run-time how dns_hub is actually proxying
DNS requests, which will hopefully aid in debugging problems (i.e.
forgetting to add a mapping when adding a new DNS realm).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Mar 6 00:48:43 UTC 2019 on sn-devel-144
We've dropped the iface logic now - this dictionary maps from
realm-to-IP.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The code is more readable if the hashmap translates between realm and
DC-name, rather than realm-to-iface. We already have a function to map
between DC-name and iface (and since we're doing this, we might as well
map straight to IP address).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Instead of storing hashmaps in 2 different files, we can just convert a
perl hashmap into a string, pass it to dns_hub, and convert it back into
a python dictionary.
The main reason for doing this is the IP-to-testenv mapping now all
lives in a single file (Samba.pm). All this logic is right next to each
other rather than being split across multiple files. Hopefully this will
make it easier to keep it up to date as we add new testenvs.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Add a separate helper function, as the realm-to-IPv4-addr logic is
fairly self-contained.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
dns_hub.py maps the testenv realm to an IP and Samba.pm maps the testenv
NetBIOS name to an IP. We need to keep the two places consistent, as we
add or remove testenvs.
This patch changes dns_hub.py so that it uses a similar hashmap to
Samba.pm. We now have a hashmap with the same name in 2 different
places, so hopefully that's easier to tie them together and keep them in
sync.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It looks a bit cleaner if we declare the hash-map in one go, rather than
adding each entry one at a time. Also added a comment explaining what
the hash-map is for, and fixed up tab vs spaces inconsistencies.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We implicitly assume the client IP used by selftest is always
127.0.0.11. Add an iface entry for the client to make this a little more
explicit.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
dns_hub doesn't need to store $ctx->{swiface}. Other testenvs store this
and export it as SOCKET_WRAPPER_DEFAULT_IFACE (i.e. for the tests to
use), but dns_hub doesn't need to do this.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This will allow us to run really most tests in an isolated
autobuild/ci task later.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This will allow us to run really most tests in an isolated
autobuild/ci task later.
This will apply to tests, which may not rely on the ntvfs backend, so
the ad_dc_default alias can point to another environment in future.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This will allow us to run really slow tests in an isolated
autobuild/ci task later.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Using aliases it will be possible to split the large amount
of tests which use ad_dc_ntvfs into multiple autobuild/ci
tasks/jobs later.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Tests to validate that winbind generates a random logon_id and passes it
in the netlogon call.
This will allow the linking of the windbind authentication requests and
the SamLogon request on the DC.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It's simpler to do setup DC_SERVER/etc in the same place we set
SERVER/etc. (Rather than initializing them for every single testenv,
like we were doing).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Mon Feb 18 07:24:05 CET 2019 on sn-devel-144
For every 2-DC testenv we setup, we copy the $DC_SERVER value of the
dependent testenv (i.e. the PDC) into the env variables for the new
testenv. This means DC_SERVER always points to the PDC (or first DC).
This adds a helper function to avoid repeating this code for every 2-DC
environment we setup.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Same deal as earlier patch - we can use the $SERVER env variable instead
and avoid the need for this extra variable.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We only really want generic environment variables. For 2+ DC
environments, we have the $SERVER and $DC_SERVER (aka PDC) variables.
However, lots of testenvs also export really specific environment
variables, e.g. VAMPIRE_2000_DC_SERVER_IP (despite that testenv being
only used for a single test case).
Previously the <testenv>_SERVER variable was used for DRS tests, but we
can avoid the need to do this now. The other variables are not used at
all.
The RODC and TRUST environment variables are still used by a few tests.
SUBDOM_DC_SERVER is only used within Samba4.pm and not exported.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
In a few rare cases, a test needs to assert aspects both client-side and
server-side aspects. A typical example would be the audit logging, which
is exercising client-side behaviour, but also asserting the server-side
logging.
Usually this has involved a kludge in tests.py to either use
socket-wrapper explicitly, or hardcode in the server smb.conf path.
This patch exposes the existing SERVERCONFFILE env variable to the
tests. DC_SERVERCONFFILE has been added for 2 DC testenvs, where we need
the PDC's smb.conf.
The benefit of doing this way is the filepath/testenv-dependency logic
is all self-contained with the Perl code, and it doesn't bleed out into
tests.py as well.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We prefix samba-tool commands with a bunch of WRAPPER/CONF environment
variables, in order for the command to work properly. These variables
are duplicated all over the place in the selftest code. This patch adds
a helper function to return the variables, so we can reduce the required
code down to a single line in a lot of places.
A couple of exceptions I've left alone:
- drs replicate, which omits the RESOLV_WRAPPER_CONF/_HOSTS variables
(I'm not sure whether that's deliberate or not).
- create_backup(), which uses the backupfromdc's krb5.conf rather than
the new testenv.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We can't reliable start tests without registered dns names.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This was added in ac5427c6eb as part of the MIT KDC
effort, but makes some tests much less reliable under high load.
As the Heimdal build does not need this, only specify for the MIT build.
Tested with an MIT AD DC build with:
make test TESTS="samba3.raw.session samba3.smb2.session"
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Feb 13 05:49:43 CET 2019 on sn-devel-144
Recently the gitlab CI jobs were hitting memory resource limits and
using swap, which then caused test failures. The process model used in
the testenvs seemed to be contributing to this problem.
We can reduce the memory overhead of the restore/backup testenvs by
using 1 prefork child process instead of the default of 4 (kudos to
Garming for the idea). The tests run against these testenvs are basic
sanity-checks, rather than heavy-duty stress tests, so the number of
prefork workers shouldn't matter.
This is a bit of a tradeoff between testing the defaults that will
actually be used in production vs using limited resources efficiently on
shared CI runner machines.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The default setting should be 4, so there should be no need to specify
this in the testenv smb.conf.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We only print debug messages when the response is delayed by more than 2
seconds.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
I was hitting the recv_packet = s.recv(2048, 0) exception because
the socket timeout was reached. We've seen it before, but it seemed more
common after changing the default process-model to prefork. This patch
makes the socket timeout used by the python code consistent with the C
code.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We should not rely on Linux specific sed options.
grep -q also works on FreeBSD (tested on FreeBSD 12).
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The dns_hub changes missed a dependency. Fortunately, during an
autobuild, the dns_hub is always up and running by the time the
proclimitdc tests are run. However, the tests were failing if run
locally just on their own.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
These testenvs shouldn't be dependent on the process model at all, so we
should be able to convert them to the new default without any
repercussions.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It's more realistic to *not* always specify a process-model, and rely on
the samba code to use the correct default. This patch changes selftest
so we only use the -M process-model option if a particular process_model
was specified. Otherwise the testenv will use whatever the default is.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Add a description explaining what dns_hub does and why we need it.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
As dns_hub.py is now integral to the selftest environments, it seems to
make sense for it to live under the selftest/ directory.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13752
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Björn Baumbach <bbaumbach@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Jan 30 01:51:48 CET 2019 on sn-devel-144
The ntacls_backup tests use the test1 share, and we want to run them
against the restoredc (which has SMBv1 disabled).
The xattr.tdb file is needed for the backend_obj.wrap_getxattr() call
(in ntacls.py) to work.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
Files included from smb.conf have to exists, otherwise python fails to
load the configuration. Found while trying to run a python test before
samba3.blackbox.smbd_error creates the included file.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Noel Power <npower@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
When run with MIT kerberos, the smb2 session expire tests fail when run
against the ad_member test environment. The krb5 library initializes
values from the private krb5.conf profile
st/ad_member/lockdir/smb_krb5/krb5.conf.ADDOMAIN, this file does not
contain a defined clockskew setting. The expire tests require a low
clockskew value that is set in st/ad_member/lib/krb5.conf.
This patch disables the creation of the private krb5.conf for the
ad_member_idmap_rid testenv, and runs the smb2.session tests
against ad_member_idmap_rid instead of ad_member.
Signed-off-by: Justin Stephenson <jstephen@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Dec 12 12:51:24 CET 2018 on sn-devel-144
KCC onthe backup domain (i.e. backupfromdc, restoredc, offlinebackupdc)
can establish new connections for replication. Depending on timing,
this can cause the join_ldapcmp test to fail, because there's an extra
object under the NTDS Settings, at the point the ldapcmp is done.
We don't need any replication to happen on the backup domain. The
backup/restore workflow in the real world should mean that the restored DC
is never run in the same network as the original DC.
This patch updates the default KCC command for the backup testenvs to be
a no-op, so the DCs won't create new connection objects.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Dec 6 12:03:53 CET 2018 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13699
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Böhme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Dec 5 05:22:43 CET 2018 on sn-devel-144
Tests to confirm the standard process model honours the smbd.conf
variable "max smbd processes", when forking a new process on accept.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We recommend users disable SMBv1 to avoid potential security holes.
However, none of the AD DC testenvs have SMBv1 disabled.
This patch disables SMBv1 on an arbitrarily-chosen testenv (restoredc).
I chose restoredc as we'll want to run the backup tool tests against
this target, and it might be useful to check we can backup a DC if it's
already been restored once.
Note that SMBv2 doesn't support POSIX extensions (only SMBv1 does),
which is why we haven't just disabled SMBv1 on *all* testenvs.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Regardless of whether the testenv uses --use-ntvfs as part of its
provision options, the s4 testenvs all default to using the NTVFS file
server.
It's not particularly obvious that this is happening. The new restore
DCS (restoredc, renamedc, labdc) were all using NTVFS unintentionally.
The problem is the s4 testenvs default to using services '-s3fs +smb".
provision_ad_dc() explicitly overrides this to use s3fs again
(technically it ends up with both in its smb.conf and just uses whatever
comes last).
This patch changes the testenv setup to check for the presence of the
'--use-ntvfs' option and to set the 'server services' config option
appropriately. This way, the provision command and the smb.conf options
should always line up, with respect to NTVFS.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The chgdcpass testenv was not passing --use-ntvfs to the provision
command, but it was still actually using NTVFS.
The reason is the smb.conf generated by provision_raw_step1() would
always try to use the s4/NTVFS file server. Because the smb.conf already
existed, this trumped what was passed to the provision command.
This patch doesn't change the chgdcpass file server. It just makes it
more obvious that chgdcpass is using NTVFS.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
If a testenv didn't specify any other provision arguments, then it
defaulted to using the NTVFS file server.
This patch makes it explicit, so we just pass through "--use-ntvfs" as
extra provision args in the cases we want.
(Whether all these testenvs really need to use NTVFS or not is another
question, but at least now it's easy to see which testenvs use it).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Add tests for the restarting of failed/terminated process, by the
pre-fork process model.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
When we created the backup-file for the restoredc/renamedc/labdc
testenvs we weren't explicitly a --configfile on the samba-tool command.
This meant the command tried to use the smb.conf form the default
install location, i.e. /usr/local/samba/etc/smb.conf. On the gitlab CI
runner, there's no samba installed, so it ends up using the default
settings, which is fine. However, if the host machine had an invalid
smb.conf installed there, creating the testenv would fail with an error
like:
ERROR(runtime): uncaught exception - Unable to load default file
File "bin/python/samba/netcmd/__init__.py", line 184, in _run
return self.run(*args, **kwargs)
File "bin/python/samba/netcmd/domain_backup.py", line 222, in run
lp = sambaopts.get_loadparm()
File "bin/python/samba/getopt.py", line 94, in get_loadparm
self._lp.load_default()
We can avoid this by always explictly specifying the backupfromdc's
smb.conf when creating the backup file.
Likewise, labdc/customdc also need the config specified when the admin
password is reset.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
We always need to specify "env->{CONFIGURATION}" when running a samba-tool
command to setup a testenv. Add a note to the README as this wasn't at
all clear.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Nov 9 03:49:55 CET 2018 on sn-devel-144
Convert the ad_dc environment from single process model to the prefork
process model.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This still doesn't cover all the testenvs comprehensively, but it
pretty much exhausts my knowledge of what the various testenvs do.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Douglas Bagnall <dbagnall@samba.org>
Autobuild-Date(master): Wed Nov 7 04:39:05 CET 2018 on sn-devel-144
Also documented the other backup/restore testenvs as well.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
setup_namespaces() already gets done for the backupfromdc's domain, so
this step is unnecessary for the restoredc and offlinebackupdc testenvs
(which are based off the backupfromdc's database).
The setup_namespaces() step is still necessary for the renamedc/labdc,
as these don't have the UPN/SPN suffixes for the new realm yet.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Nov 1 13:06:01 CET 2018 on sn-devel-144
This adds a new testenv that can be used for sandpit/manual testing.
This testenv can be based off any backup-file that you like.
The main use case is large databases. Populating 1000s of users is
time-consuming (it can take hours to create a really large DB). Instead
of having to manually add users to the testenv every time you want to
try something, this allows you to populate the users just once, take a
backup/snapshot of the DB, and then spin up the backup multiple times.
In theory this testenv could be useful for other situations too, e.g.
dealing with a corrupted database, testing DB migration (e.g. 4.7 -->
4.8), or if (for some reason) you wanted to create a realistic
lab-domain within a testenv.
To run-up the testenv you need to specify a BACKUP_FILE environment
variable (the same way we specify the SELFTEST_TESTENV), e.g.
BACKUP_FILE=/files/backup-10k-ad_dc.tar.bz2 \
SELFTEST_TESTENV=customdc make testenv
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Vary the DB backend that we use for the renamed DCs. The labdc and
renamedc are fairly similar, so let's have each of them use a different
backend.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Ensure python scripts are called with the python version that
is defined by $PYTHON
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The samdb object isn't initialized here anymore,
but in the gp_sec_ext, so this parameter to
gpupdate does nothing.
Signed-off-by: David Mulder <dmulder@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Previously (i.e. up until the last patch) the backup/restore commands
only worked if the Default-First-Site-Name site was present. If this
site didn't exist, then the various restore testenvs would fail to
start. This is now fixed, but this patch changes the backupfrom testenv
so that it uses a non-default site. This will detect the problem if it
is ever re-introduced.
To do this we need to change provision_ad_dc() so the
extra_provision_options can be specified as an argument. (Note that Perl
treats undef the same as an empty array).
By default, the restore will add the new DC into the
Default-First-Site-Name site. This means the backupfromdc and restored
testenvs will now have different sites, so we need to update the ldapcmp
filters to exclude site-specific attributes.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13621
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The failures in this test compared with Windows Server 1709 are added to
knownfail.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Otherwise this relies on the order that tests run to cause the environment variable
to be left behind.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Otherwise this relies on the order that tests run to cause the environment variable
to be left behind.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This might reduce issues with the first winbind-using test failing
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Previously the only test was to load these modules to trigger the
smb_vfs_assert_all_fns check. As these modules just pass through the
calls, they can be loaded for all tests to ensure that the codepaths are
exercised. This would have found the problem in
smb_time_audit_offload_read_recv.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13568
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Aug 13 22:35:20 CEST 2018 on sn-devel-144
This is a selftest target built from a restored offline backup.
Other backup routines are modified to remove the assumption that every backup
requires server and credentials arguments, since offline backup doesn't
want them. Also, prepare_dc_testenv now returns the generated ctx so we can
run or re-run routines that require it later.
Signed-off-by: Aaron Haslett <aaron.haslett@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Autobuild-User(master): Gary Lockyer <gary@samba.org>
Autobuild-Date(master): Mon Aug 6 08:45:19 CEST 2018 on sn-devel-144
This runs the smbtorture3 SMB2-BASIC and smb2.compound_find tests against shares
with "smbd:async dosmode" enabled.
On the vfs_aio_pthread_async_dosmode_force_sync* shares we
force a sync threadpool which ensures we test behaviour on systems that
don't support unshare(CLONE_FS) and also don't support
per-thread-credentials. This simulates the code path of non linux
systems. And makes sure that we don't regress there.
We also test with xattr_tdb and without.
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Jul 27 16:04:02 CEST 2018 on sn-devel-144
This just explicitly sets the current default, to ensure the tests that
use this share always use the same "smbd:async dosmode" setting even if
the default changes in the future.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
One of the use-cases for the domain rename tool is to produce a lab
domain that can be used for pre-production testing of Samba.
Basically this involves taking a backup rename with --no-secrets (which
scrubs any sensitive info), and then restoring it.
This patch adds a testenv that mimics how a user would go about creating
a lab-domain. We run the same tests that we run against the restore and
rename testenvs.
Note that the rpc.echo tests for the testallowed and testdenied users
fail, because we don't backup the secrets for these users. So these
tests failing proves that the lab-DC testenv is correct.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Add a new testenv that's similar to the existing restoredc, except we
use 'backup rename' to rename the domain as we back it up.
Restoring this backup then proves that a valid DC can be started from a
renamed backup.
Run the same sub-set of RESTOREDC tests to prove that the new testenv is
sound.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
On a Windows client, you designate machine/user
apply with a 'target' parameter. This change
makes gpupdate work more like that command.
Signed-off-by: David Mulder <dmulder@suse.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Jul 4 13:23:09 CEST 2018 on sn-devel-144
On a Windows client, this command is called 'gpupdate'
Signed-off-by: David Mulder <dmulder@suse.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This adds a new testenv for testing that a DC created using the
samba-tool backup/restore can actually be started up. This actually
requires 2 new testenvs:
1. A 'backupfromdc' that solely exists to make a online backup of.
2. A 'restoredc' which takes the backup, and then uses the backup file
to do a restore, which we then start the DC based on.
The backupfromdc is just a plain vanilla AD DC. We use a separate test
env purely for this purpose, because the restoredc will use the same
domain (and so using an existing testenv would potentially interfere
with existing test cases).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Commit 19606e4dc6 updated the MAX_WRAPPED_INTERFACES define
in the C code from 40 to 64.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Log details of Group membership changes and User Primary Group changes.
Changes are logged in human readable and if samba has been built with
JANSSON support in JSON format.
Replicated updates are not logged.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Add audit logging of DSDB operations and password changes, log messages
are logged in human readable format and if samba is commpile with
JANSSON support in JSON format.
Log:
* Details all DSDB add, modify and delete operations. Logs
attributes, values, session details, transaction id.
* Transaction roll backs.
* Prepare commit and commit failures.
* Summary details of replicated updates.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It can't really matter in this case, but it removes confusion
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed May 30 21:46:53 CEST 2018 on sn-devel-144
This ensures the LMDB backend is tested in make test
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
