IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This removes a lot of inline #ifdef and means this feature is always tested.
We can do this as we have chosen GnuTLS 3.6.13 as the new minimum version.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
The combination MANDATORY | ENABLED_BY_DEFAULT | ENABLED is very
commonly used, and introducing a shorter alias for it makes the code
clearer.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The bad password count is supposed to limit the number of failed login
attempt a user can make before being temporarily locked out, but race
conditions between processes have allowed determined attackers to make
many more than the specified number of attempts. This is especially
bad on constrained or overcommitted hardware.
To fix this, once a bad password is detected, we reload the sam account
information under a user-specific mutex, ensuring we have an up to
date bad password count.
We also update the bad password count if the password is wrong, which we
did not previously do.
Derived from a similar patch to source3/auth/check_samsec.c by
Jeremy Allison <jra@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14611
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Tue Sep 13 00:08:07 UTC 2022 on sn-devel-184
Now samr_set_password_aes() just returns the new password in a similar
manner to check_oem_password(). This simplifies the logic for the
following change to recheck whether the account is locked out, and to
update the bad password count.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14611
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This ensures these calls are not optimised away.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The bad password count is supposed to limit the number of failed login
attempt a user can make before being temporarily locked out, but race
conditions between processes have allowed determined attackers to make
many more than the specified number of attempts. This is especially
bad on constrained or overcommitted hardware.
To fix this, once a bad password is detected, we reload the sam account
information under a user-specific mutex, ensuring we have an up to
date bad password count.
Derived from a similar patch to source3/auth/check_samsec.c by
Jeremy Allison <jra@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14611
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Since memcmp_const_time() doesn't act as an exact replacement for
memcmp(), and its return value is only ever compared with zero, simplify
it and emphasize the intention of checking equality by returning a bool
instead.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This helps to avoid timing attacks.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15010
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This is a big patch, but all it does is replace all "p->session_info"
with "session_info" after introducing a local variable from
dcesrv_call_session_info(p->dce_call).
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Also available via dcesrv_connection_get_remote_address(p->dce_call->conn)
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is the big switch to use samba-dcerpcd for the RPC services in
source3/. It is a pretty big and unordered patch, but I don't see a
good way to split this up into more manageable pieces without
sacrificing bisectability even more. Probably I could cut out a few
small ones, but a major architechtural switch like this will always be
messy.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Use a variable that we just set a line before, don't duplicate the
priv name.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Instead of adding the NULL check to data_blob_talloc_zero() put "out"
on the stack.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Instead of adding the NULL check to data_blob_talloc_zero() put "out"
on the stack.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
It's a bit shocking how many references we have to global
contexts. Make this a bit more obvious.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The generic function already checks the handle type.
Signed-off-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Now that the type associated to the handle is the same for all handle
types we can wrap the access check.
Signed-off-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Now that we pass the handle type to the generic handle creation and find
functions we can drop the specific SAMR ones.
The policy_handle_create() function labeled the talloc chunk used to
allocate the handle's associated data, and the policy_handle_find() is
checking the name matches with the expected data. The check is performed
now by the generic functions based on the handle type so we can drop
these SAMR specific functions.
Signed-off-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Following changes in commit c7a4578d06
pass the handle type to the handle search functions. The handle type will
be verified unless passing DCESRV_HANDLE_ANY to find functions.
Signed-off-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The handle based security model is a SAMR specific feature. The access
granted is stored in the handle's associated data after creating it and
the access is verified after searching the handle.
Signed-off-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Various RPC services expect policy handles of a specific type.
s3 RPC server did not allow to create policy handles with a specific
type while actually requiring that policy handle type itself in some
places.
Make sure we are able to specify the policy on-wire handle type when
creating the policy handle. The changes follow s4 DCE RPC server
implementation.
The original logic to always set on-wire handle type to 0 can be tracked
down to commit fdeea341ed when we didn't
really know about differences in on-wire handle types.
All but LSA trusted domain RPC calls do not check the on-wire handle
type in s3 RPC server.
Fixes trusted domain operations when Samba RPC client attempts to call
s3 RPC server to perform lsa_lsaRSetForestTrustInformation in FreeIPA.
This fix is a pre-requisite for FreeIPA-FreeIPA forest trust.
Signed-off-by: Alexander Bokovoy <ab@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Apr 28 22:55:29 UTC 2020 on sn-devel-184
Prototype is generated by the server compat parser.
Signed-off-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Jul 26 03:05:01 UTC 2019 on sn-devel-184
