IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Better compatibility, since od output isn't consistent on FreeBSD.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Mar 10 09:17:12 UTC 2020 on sn-devel-184
When the tests are run interactively this will make it more noticeable
that shellcheck is not installed because the test summary will
indicate missing tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Skipped tests return a status that indicates failure. In combination
with the -e option this results in an exit with failure on the first
skipped test.
Convert skipped test status to success. The skip has already been
counted.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
When "ctdb shutdown" is run with -n <N> it does not wait for the node
<N>'s ctdbd to go down but exits immediately. This means that the
local_daemons.sh shutdown command can find the PID file still present
and then attempt the shutdown, but the daemon can have exited between
the check and the shutdown. Although the test waits until the node is
disconnected, the transport is taken down just before the exit, so
this does not guarantee the daemon has exited.
A local shutdown command (no -n <N>) waits until the socket
disconnects and this happens *after* the PID file is gone, so this is
safe to use with the local_daemons.sh shutdown command.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Mar 2 10:39:28 UTC 2020 on sn-devel-184
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Sat Feb 29 11:53:42 UTC 2020 on sn-devel-184
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Sat Feb 29 08:02:50 UTC 2020 on sn-devel-184
This change basically moves out nmbd references from 50.samba script to
a new 48.netbios script. Accordingly ctdb test scripts are tweaked to
cope with newly added script.
Signed-off-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This depends on a small amount of internal knowledge but is the
cleanest way of avoiding errors for nodes that have already been shut
down.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Separate functions are not needed for stopping/starting/restarting
individual nodes. The stop and start functions essentially just use
onnode, though for local daemons this is embedded in local_daemons.sh.
So, just provide one stop and one start function that takes an
optional nodespec, defaulting to all nodes.
Restarting becomes common.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Typo in variable name db_map_pattern
* Variable num_db_init used before set
* dbmap_pattern does not cover database flags
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Feb 12 04:38:47 UTC 2020 on sn-devel-184
Shellcheck noticed that pnn was never referenced. Not sure this ever
worked or whether it got broken somewhere along the way.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
select_test_node_and_ips() is not required in these cases.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
When running tests from a top-level build, a stale build in ctdb/bin/
will be preferred and may cause confusing results.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is used to set several variables so it might as well be cd-proof.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There is no sane way of keeping stdin open when using the shell to
background ctdbd in local_daemons.sh. Instead, have ctdbd fork when
not interactive and when test mode is enabled. become_daemon() can't
be used for this: if it forks then it also closes stdin.
For the interactive case, become_daemon() wasn't doing anything
special, so do nothing instead.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
A subsequent file descriptor allocation may return 0 and unexpected
things may then happen.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Otherwise, if the test is run via ssh it will "unexpectedly" find
itself at the other end of a pipe.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This doesn't work when stdin is not a tty.
This reverts commit ea754bfdec.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Jan 30 13:53:22 UTC 2020 on sn-devel-184
POSIX says:
If job control is disabled (see set, -m), the standard input for an
asynchronous list, before any explicit redirections are performed,
shall be considered to be assigned to a file that has the same
properties as /dev/null. This shall not happen if job control is
enabled. In all cases, explicit redirection of standard input shall
override this activity.
ctdbd is backgrounded at startup, so the above causes stdin to be
redirected from /dev/null. Enable job control to work around this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Tue Jan 28 11:24:35 UTC 2020 on sn-devel-184
This makes it more like the way it works with a cluster filesystem.
It also allows the subdirectory to be manipulated in tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
See the comments added to the tests.
It may be possible to rewrite these so they do something sane for
IPv6... some other time.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14227
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Jan 3 00:00:55 UTC 2020 on sn-devel-184
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Thu Nov 14 12:03:46 UTC 2019 on sn-devel-184
If any of the option parsing or command parsing fails, generate usage
message.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This can fail as follows:
--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--
Running test ./tests/UNIT/tool/ctdb.process-exists.003.sh (02:26:30)
--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--
ctdb.process-exists.003 - ctdbd process with multiple connections on node 0
Setting up fake ctdbd
<10||0|
OK
<10|PID 26107 exists
|0|
OK
==================================================
Running "ctdb -d NOTICE process-exists 26107 0x1234567812345678"
PASSED
==================================================
Running "ctdb -d NOTICE process-exists 26107 0xaebbccdd12345678"
Registered SRVID 0xaebbccdd12345678
--------------------------------------------------
Output (Exit status: 1):
--------------------------------------------------
PID 26107 with SRVID 0xaebbccdd12345678 does not exist
--------------------------------------------------
Required output (Exit status: 0):
--------------------------------------------------
PID 26107 with SRVID 0xaebbccdd12345678 exists
FAILED
connection to daemon closed, exiting
==========================================================================
TEST FAILED: ./tests/UNIT/tool/ctdb.process-exists.003.sh (status 1) (duration: 0s)
==========================================================================
This happens when dummy_client has not registered the SRVID (for its
10th connection) before the 2nd simple_test.
Change the initial wait to ensure that the SRVID is registered.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Nov 6 02:46:24 UTC 2019 on sn-devel-184
Improve quoting and indentation. Print a clear error if the cluster
goes back into recovery and doesn't come back out.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Retrying like this hides bugs. The cluster should come up first time,
every time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
