IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Guenther
Signed-off-by: Günther Deschner <gd@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat May 30 05:03:59 CEST 2015 on sn-devel-104
For use with DisableIPFailover=1.
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed May 13 09:27:36 CEST 2015 on sn-devel-104
This is an alternative to 10.interface and is installed as disabled by
default. It should only be used with DisableIPFailover=yes and when
IP failover is being handled externally. In this mode CTDB can be
informed of public IP address movements using "ctdb moveip".
During the "startup" event, this eventscript currently finds any
public IP addresses configured in $CTDB_PUBLIC_ADDRESSES and tells
CTDB which node they are on using "ctdb moveip". This allows CTDB to
send ARPs and tickle-ACKs.
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This means that DisableIPFailover will be set if it should be.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If DisableIPFailover is set then something else may be managing public
IP addresses so CTDB should leave them alone.
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
00.ctdb should not know about public IP addresses.
Move related tests to operate on 10.interface.
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There won't be an IP tree. It is only ever initialised during a
takeover run.
The alternate to this would be to avoid sending
CTDB_SRVID_RECD_UPDATE_IP in "ctdb moveip". This logic is probably
best kept out of the CLI tool.
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The potential for public IP addresses to shuffle around during node
initialisation disappeared a while ago because IP addresses can only
be assigned to a node that is in CTDB_RUNSTATE_RUNNING. This means
that interfaces might as well just be initialised as "up". If any
interfaces are actually "down" then this will be rectified by the
"startup" event in 10.interfaces.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To support external failover of IP addresses if DisableIPFailover is
set. CTDB's idea of IP address assignment can be manipulated using
"ctdb moveip". Checking if the IP address is already held breaks
this in several places.
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ctdb_sys_have_ip() should only be run if if do_publicipcheck is set.
This is clearer if written as 2 nested if-statements rather than as a
lazy conjuction.
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Sun May 10 06:10:21 CEST 2015 on sn-devel-104
Don't initialise it after ctdb_event_script_callback_v() may have
short-circuited. This can stop ctdb_event_script_args() from ever
terminating.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
status.done is never set to true unless event_script_callback() is
invoked. The short-circuit in ctdb_event_script_callback_v() means
that this doesn't happen. CTDB can't work very well without 00.ctdb
(for tunable initialisation and the like) but it shouldn't get stuck.
So call the callback when there are no scripts in
event_script_callback().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is done by 10.interace where the monitor event fails when there
is a missing interface. The in-daemon interface checking adds no
value.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This isn't used or documented anywhere.
2 differing points of view:
* This is a very good idea but it should probably be generalised to
cover more configuration items. This would end up like the Samba
registry configuration and would use a tool to support setting
configuration values.
* If people really want to update configuration while a node is down
then they should fix the configuration before bringing up that node.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If all nodes are still in, say, FIRST_RECOVERY runstate, then the logs
contain unfortunate noise like:
recoverd:Failed to find node to cover ip 10.0.2.131
This avoids that by adding an early exit that avoids running
takeover_run_core() when there are no nodes in the
CTDB_RUNSTATE_RUNNING.
To support this add the runstate to the ipflags structure. There are
clearly other ways of hacking this but this seems the simplest.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It isn't possible to hold the recovery lock without having a lock file
set.
This is part of a goal to generalise the recovery lock mechanism to
just use a helper program, which may use a lock file or may use
something else.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Election packets from the current node are ignored at the beginning of
the function, so this does not need to be checked.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
No need to just send it to the recovery master.
This reduces the need for main daemon code to know which node is the
recovery master. The end goal is for the main daemon to not need to
know which node is the recovery master - this information would be
stored in the recovery daemon (and subsequently a separate cluster
management daemon).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Databases are only pulled by the recovery master, so it can compare
with current node PNN.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Unless this node is the recovery master then this is not needed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It isn't used anywhere else and is always re-initialised to 0.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
They are initialised and updated but the values are never used.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Simplify update_capabilities() using the capabilities API and store
the capabilities in new field rec->caps rather than scattered around
ctdb->nodes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ctdb_get_capabilities() gets capabilities from all connected nodes
into an array. ctdb_get_node_capabilities() gets capabilities for a
particular node from array. ctdb_node_has_capabilities() returns true
if given node has all of the given capabilities.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This reverts commit 39d2fd330a.
An election can occur in the middle of a recovery. During the
election the recovery master can change. When a node loses a round of
the election and stops being the recovery master it releases the
recovery lock. Then at the end of the ongoing recovery all nodes are
able to take the recovery lock so they will all abort.
The most likely cause for a change in recovery master is that several
(all?) nodes are starting up and the "connected-ness" of each node is
a primary factor in winning the election. In this situation the
recovery master can bounce around the cluster.
The simplest solution is to revert this patch so that the recovery
will fail. The new recovery master will then start a new recovery.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon May 4 10:40:36 CEST 2015 on sn-devel-104
For example, adding a file called nfs-rpc-checks.d/20.nfsd@udp.check
will cause NFS to be checked on UDP as well, using a separate counter.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Thu Apr 30 09:24:12 CEST 2015 on sn-devel-104
If tdb database file size grows beyond 4GB, tdbtool/tdbdump can hang
indefinitely. This will prevent CTDB from starting up.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Required when automatic address detection can not be used. This can
be the case when running multiple ctdbd daemons/nodes on the same
physical host (usually for testing), using InfiniBand for the private
network or on Linux when sysctl net.ipv4.ip_nonlocal_bind=1.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Apr 27 06:10:08 CEST 2015 on sn-devel-104
There are valid real-world use cases. Improve the documentation.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
"ctdb xpnn" does not work when sysctl net.ipv4.ip_nonlocal_bind=1,
since it determines the node by attempting to bind to each addres in
the nodes file. The solution is to not use "ctdb xpnn". After the
initial call, ctdb_get_pnn() will be more efficient that "ctdb xpnn".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ctdb_get_pnn() incorrectly caches to the same file regardless of what
node is selected via FAKE_CTDB_PNN.
Instead, set the PNN using new function ctdb_get_pnn(), which also
makes CTDB_VARDIR point to a node-specific subdirectory. This means
that ctdb_get_pnn() will correctly cache to the node-specific
directory.
Fake tickle and TDB files/directories used by the ctdb stub need to be
the same across all PNNs, so change these to use
$EVENTSCRIPTS_TESTS_VAR_DIR instead of node-specific $CTDB_VARDIR.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This avoids the expense of establishing a client connection to the
daemon just to get the PNN of the current node.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Due to usage of CTDB_NO_MEMORY macro,
some of the resources are not freed in failure cases.
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Fri Apr 17 16:49:05 CEST 2015 on sn-devel-104
