IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This makes sure that AllowClientDBAttach is set to 0 before detaching any
databases.
If someone enables the tunable between checking of tunable and actual
detaching of databases, then they deserve what they get. :-)
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
Commit 4ee4925d41 forgot about
CTDB_NATGW_SLAVE_ONLY so it introduces an incorrect failure when this
is set, and CTDB_NATGW_PUBLIC_IFACE or CTDB_NATGW_PUBLIC_IP is unset.
Relax the sanity check to see if CTDB_NATGW_SLAVE_ONLY is set.
Update the documentation to explicitly state that
CTDB_NATGW_PUBLIC_IFACE and CTDB_NATGW_PUBLIC_IP are optional and
unused if CTDB_NATGW_SLAVE_ONLY is set. It would be possible to
insist that CTDB_NATGW_PUBLIC_IFACE and CTDB_NATGW_PUBLIC_IFACE should
be unset in that case. However, it is more reasonable to allow
consistent configuration across nodes except with some nodes
configured slave-only.
Add tests, update infrastructure and fix a thinko in the stub's
"natgwlist" implementation.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Mon Apr 14 06:06:49 CEST 2014 on sn-devel-104
Extend CTDB_NATGW_STATIC_ROUTES so that each network can have an
optional gateway that overrides CTDB_NATGW_DEFAULT_GATEWAY.
Signed-off-by: Martin Schwenke <martin@meltin.net>
This has been implied since the command to add the route has had
errors redirected to /dev/null. If infrastucture (e.g. ADS, DNS) is
on the same network as CTDB_NATGW_PUBLIC_IP then no route is
necessary.
Signed-off-by: Martin Schwenke <martin@meltin.net>
This feature was added quite a while ago but was not enabled by
default. It is a useful feature so enable it to dump stack traces of
up to 5 stuck processes by default.
This can be disabled by setting:
CTDB_NFS_DUMP_STUCK_THREADS=0
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Feb 25 04:06:45 CET 2014 on sn-devel-104
* Add stack dumps for "interesting" processes that sometimes get
stuck, so try to print stack traces for them if they appear in the
pstree output.
* Add new configuration variables CTDB_DEBUG_HUNG_SCRIPT_LOGFILE and
CTDB_DEBUG_HUNG_SCRIPT_STACKPAT. These are primarily for testing
but the latter may be useful for live debugging.
* Load CTDB configuration so that above configuration variables can be
set/changed without restarting ctdbd.
Add a test that tries to ensure that all of this is working.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Also:
* More <refentryinfo> above <refmeta> to make the XML valid.
* Describe DB argument in introduction and use it for database
commands.
* Remove unnecessary format="linespecific" from <screen> tags, since
it will not be allowed in DocBook 5.0.
* Sort the items in "INTERNAL COMMANDS".
* Update/simplify some command descriptions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
This can be useful for piping data to onnode in certain circumstances.
There are now also enough command-line options that they should
definitely be alphabetically ordered.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
This includes new manpages for ctdb.7, ctdb.conf.5 and ctdb-tunables.7.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 15b5c6c00c248bc1a8364a6da103296a55d7bfb6)
Use sequence numbers to do recovery for persistent databases instead of
RSNs. This fixes the problem of registry corruption during recovery.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 56486d1c01cc8ad0e4b8cee7a22429e72e50f03d)
This simplifies building since we don't use any of the Samba
extensions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 57aa2dffea60abd73a95233f8b761cc676adebb6)
This will allows eventscripts to send information about multiple tcp
connections to a single "ctdb killtcp" command, saving the overhead of
setting up a client connection per tcp connection.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit af5aa369c266430fe912df0c26116b68bac3572e)
The code for deadlock detection and killing smbd process causing deadlock
has been removed and replaced with external debug script.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 2211cd94bea266547d3e6f167d3160a6b23bec88)
When the recovery master notices a node in recovery mode it starts the
recovery process, it doesn't restart it.
Update documentation to match.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 298c4d2c3b4ea3d900c91f5a0a5aca2952a13d61)
The example notification script is now much more useful.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 4ba7c73eeab98296c9168e0b0fed1f6bb9f32733)
This adds more serialisation to the startup, ensuring that the
"startup" event runs after everything to do with the first recovery
(including the "recovered" event).
Given that it now takes longer to get to the "startup" state, the
initscript needs to wait until ctdbd gets to "first_recovery".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit ed6814ff0a59ddbb1c1b3128b505380f60d7aeb7)
If one or more run states are specified then "ctdb runstate" succeeds
only if ctdbd is in one of those run states.
At the moment, if the "setup" event fails then the initscript succeeds
but ctdbd exits almost immediately. This behaviour isn't very
friendly.
The initscript now waits until ctdbd is in "startup" or "running" run
state via the use of "ctdb runstate startup running", meaning that ctdbd
has successfully passed the "setup" event.
The "setup" event code in 00.ctdb now waits until ctdbd is in the
"setup" run state before proceeding via the use of "ctdb runstate setup".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 4a2effcc455be67ff4a779a59ca81ba584312cd6)
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit bf20c3ab090f75f59097b36186347cedb1c445d4)
This really needs to be per-node. The rename is because nodes with
this tunable switched on should drop IPs if they become unhealthy (or
disabled in some other way).
* Add new flag NODE_FLAGS_NOIPHOST, only used in recovery daemon.
* Enhance set_ipflags_internal() and set_ipflags() to setup
NODE_FLAGS_NOIPHOST depending on setting of NoIPHostOnAllDisabled
and/or whether nodes are disabled/inactive.
* Replace can_node_servce_ip() with functions can_node_host_ip() and
can_node_takeover_ip(). These functions are the only ones that need
to look at NODE_FLAGS_NOIPTAKEOVER and NODE_FLAGS_NOIPHOST. They
can make the decision without looking at any other flags due to
previous setup.
* Remove explicit flag checking in IP allocation functions (including
unassign_unsuitable_ips()) and just call can_node_host_ip() and
can_node_takeover_ip() as appropriate.
* Update test code to handle CTDB_SET_NoIPHostOnAllDisabled.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 1308a51f73f2e29ba4dbebb6111d9309a89732cc)
Samba versions 3.6.x and older do not set the database priority.
This can cause deadlock between Samba and CTDB since the locking order
of database will be different. A hack was added for automatic promotion
of priority for specific databases to avoid deadlock. This code should
not be invoked with Samba version 4.x which correctly specifies the
priority for each database.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
(This used to be ctdb commit 4a9e96ad3d8fc46da1cd44cd82309c1b54301eb7)
Generated docs will be bundled with release tarballs. No need to keep
them in git. This avoids the need to commit the generated doc version
if source xml is modified.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit f3888712298f1de7cc7eb51f50c22080fa64e3c0)
This can then be used to build manpages/html when creating tarball.
Do not build docs during a regular build, but only for install.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 3274cffe2052953b34141a82de6053b747532a88)
This introduces a consistent API for handling locks on single record, complete
db or all dbs. The locks are taken out in a child process. In cases of timeout,
find the processes that currently hold the lock and log.
Callback functions for locking requests take locked boolean to indicate
whether the lock was successfully obtained or not.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 1af99cf0de9919dd89af1feab6d1bd18b95d82ff)
Stops the behaviour where unhealthy nodes can host IPs when there are
no healthy nodes. Set this to 1 when an immediate complete outage is
preferred when all nodes are unhealthy. The alternative
(i.e. default) can lead to undefined behaviour when the shared
filesystem is unavailable.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit a555940fb5c914b7581667a05153256ad7d17774)
At the moment routes from 11.routing can fail to be added because they
conflict with the default route added by 11.natgw.
NAT gateway is meant to be a last resort, so routes from 11.routing
should override it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 624f4677e99ed1710a0ace76201150349b1a0335)
