IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12505
Signed-off-by: Paul Wise <pabs3@bonedaddy.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Original-author: Nicolas Williams <nico@twosigma.com>
(cherry-picked from heimdal commit b3db07d5f0e03f6a1a0a392e70f9675e19a6d6af)
Other parts of Samba already compile these directly.
This makes these files compile with modern compiler warnings.
The primary difference (other than being built with a newer
flex) is the loss of the #include "config.h" but
this is not used in the other .l files elsewehre and does not
seem to matter on modern systems.
The generated output from compile_et asn1_compile has not changed
(so I think the hx509 case is safe).
The mdssvc case just has changed file locations and line numbers.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This allows us to avoid warnings and errors due to unsued variables
and functions.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
even if the tgt session key uses different hmac.
Per [MS-SFU] 2.2.1 PA-FOR-USER the checksum is
always HMAC_MD5, and that's what windows 7 client
and MIT client send.
In heimdal both the client and kdc use the checksum of
the tgt key instead and therefore work with each other
but windows and MIT clients fail against heimdal KDC.
Windows KDC allows either checksum (HMAC_MD5 or from
tgt) so we should do the same to support all clients.
Signed-off-by: Isaac Boukris <iboukris@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Jun 11 02:48:58 UTC 2020 on sn-devel-184
If Samba was configured with "--nonshared-binary=winexe" to build
winexe as a static binary, and the replacement closefrom() function
was used (which is default on most GNU/Linux systems without the libbsd
development package installed), then winexe would fail to link with the
error message shown below.
[2631/3059] Linking bin/default/examples/winexe/winexe
source4/heimdal/lib/roken/closefrom.c.1.o: In function `rep_closefrom':
closefrom.c:(.text+0x0): multiple definition of `rep_closefrom'
lib/replace/closefrom.c.2.o:closefrom.c:(.text+0x292): first defined here
collect2: error: ld returned 1 exit status
The real problem here was not with the winexe build itself - that was
merely the application that I was attempting to build statically when I
encountered it. As Andrew Bartlett very helpfully pointed out to me, this
regression was introduced when "lib/replace/closefrom.c" was added in
commit 55529d0f and, more to the point, when the heimdal build started
using it in commit 3a7ebd0e. From that point on, any time that Samba's
embedded copy of heimdal was statically linked into an application, it
would fail to link because heimdal's own rep_closefrom() function in its
"roken" library would conflict with the rep_closefrom() function in the
"replace" library used elsewhere in Samba - a library which the "roken"
library itself depends on. To further compound the problem, heimdal's
own "roken" library is also compiled for the host (a necessary
distinction for cross-compiled builds) and linked into a small number of
utility applications used during the heimdal build. However, they can't
link directly against the "replace" library, unlike the main "roken"
library build which carries that dependency, because the "replace"
library is _not_ built for the host.
I solved this problem by eliminating heimdal's version of rep_closefrom()
and making it use the one from "lib/replace" everywhere. That wasn't a
problem for the main heimdal library that is built for the target because
it was already linking in "lib/replace" (that's what caused this problem
in the first place!), but to solve the aforementioned issue with
"lib/replace" not being built for the host, I added
"lib/replace/closefrom.c" to the list of "source4/heimdal/lib/roken"
sources to be built for the host to satisfy heimdal's host utilities.
Everyone wins, I think.
Signed-off-by: Karl Lenz <xorangekiller@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This is not a general purpose profiling solution, but these JSON logs are already being
generated and stored, so this is worth adding.
Some administrators are very keen to know how long authentication
takes, particularly due to long replication transactions in other
processes.
This complements a similar patch set to log the transaction duration.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
The original heimdal code introduces a segmentation fault, due to an
uninitialized pointer. This code does not seem to be tested very well.
Revert "heimdal: Add include/includedir directives for krb5.conf"
This reverts commit 0a6e9b6c0e15fa6fe46acdd357d76b8df447317f.
Signed-off-by: Björn Baumbach <bb@sernet.de>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Björn Baumbach <bbaumbach@samba.org>
Autobuild-Date(master): Wed Jun 20 17:48:16 CEST 2018 on sn-devel-144
Cherry-pick of Heimdal commit fe43be85587f834266623adb0ecf2793d212a7ca
Removed tests and documentation from original commit by
Björn Baumbach <bb@sernet.de>, since we do not ship them.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11573
Signed-off-by: Björn Baumbach <bb@sernet.de>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Björn Baumbach <bbaumbach@samba.org>
Autobuild-Date(master): Mon Jun 18 15:52:26 CEST 2018 on sn-devel-144
Check asprintf() return value.
Make use of krb5_enomem().
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11573
Signed-off-by: Björn Baumbach <bb@sernet.de>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Follow Apple's lead and do not fail krb5_set_config_files() simply
because one of the files in the profile list fails to parse correctly.
Doing so can lead to hard to find failures and could lead to an end
user shooting themselves in the foot and no longer be able to login
to their system to fix it.
Parse as many of the files as we can. Only fail krb5_set_config_files()
if init_context_from_config_file() fails.
Change-Id: I122664c6d707a5f926643808ba414bf4f681f8b8
Cherry-pick of Heimdal commit b7cf5e7caf9b270f4d4151d2690177b11a7a1bdf
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11573
Signed-off-by: Björn Baumbach <bb@sernet.de>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
../source4/heimdal/lib/com_err/compile_et.c: In function ‘generate_h’:
../source4/heimdal/lib/com_err/compile_et.c:138:33: error: ‘%s’ directive output may be truncated writing up to 127 bytes into a region of size 126 [-Werror=format-truncation=]
snprintf(fn, sizeof(fn), "__%s__", hfn);
^~ ~~~
../source4/heimdal/lib/com_err/compile_et.c:138:5: note: ‘snprintf’ output between 5 and 132 bytes into a destination of size 128
snprintf(fn, sizeof(fn), "__%s__", hfn);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../source4/heimdal/lib/com_err/compile_et.c: In function ‘main’:
../source4/heimdal/lib/com_err/compile_et.c:234:35: error: ‘.h’ directive output may be truncated writing 2 bytes into a region of size between 1 and 128 [-Werror=format-truncation=]
snprintf(hfn, sizeof(hfn), "%s.h", Basename);
^~
../source4/heimdal/lib/com_err/compile_et.c:234:5: note: ‘snprintf’ output between 3 and 130 bytes into a destination of size 128
snprintf(hfn, sizeof(hfn), "%s.h", Basename);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../source4/heimdal/lib/com_err/compile_et.c:235:35: error: ‘.c’ directive output may be truncated writing 2 bytes into a region of size between 1 and 128 [-Werror=format-truncation=]
snprintf(cfn, sizeof(cfn), "%s.c", Basename);
^~
../source4/heimdal/lib/com_err/compile_et.c:235:5: note: ‘snprintf’ output between 3 and 130 bytes into a destination of size 128
snprintf(cfn, sizeof(cfn), "%s.c", Basename);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13437
Guenther
Signed-off-by: Günther Deschner <gd@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Jun 8 13:23:51 CEST 2018 on sn-devel-144
This fixes compilation with -Wstrict-overflow=2
Upstream pull request:
https://github.com/heimdal/heimdal/pull/354
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The size of portstr is too small to print an integer and we should print
a short anyway.
This fixes building with GCC 7.1
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12930
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Aug 11 18:08:04 CEST 2017 on sn-devel-144
In _krb5_extract_ticket() the KDC-REP service name must be obtained from
encrypted version stored in 'enc_part' instead of the unencrypted version
stored in 'ticket'. Use of the unecrypted version provides an
opportunity for successful server impersonation and other attacks.
Identified by Jeffrey Altman, Viktor Duchovni and Nico Williams.
Change-Id: I45ef61e8a46e0f6588d64b5bd572a24c7432547c
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12894
(based on heimdal commit 6dd3eb836bbb80a00ffced4ad57077a1cdf227ea)
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Wed Jul 12 17:44:50 CEST 2017 on sn-devel-144
Provide a XSI-compliant strerror_r on GNU based systems.
The default GNU strerror_r is not XSI-compliant, this patch wraps the
GNU-specific call in an XSI-compliant wrapper.
This reverts 18ed32ce0821d11c0c06d82c07ba1c27b0c2b886 which tried to
make Heimdal use roken, rather than libreplace for strerror_r.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We now pass on the original client name and the client address to allow
consistent audit logging in Samba across multiple protocols.
We use config->db[0] to find the first database to record incorrect
users.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
This allows the optimized checksum->verify() function to be used.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
A different version has gone upstream, fixing the problem
elsewhere.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Uri Simchoni <uri@samba.org>
Autobuild-Date(master): Mon Oct 3 11:12:29 CEST 2016 on sn-devel-144
When reading configuration file, keep an extra copy of
the encryption types, and use this when resetting the
encryption types to default.
GSSAPI always resets the enctypes to default before obtaining
a TGS, because the enctypes might have previously altered,
so this prevents changing the etypes from the configured ones
to the full set of supported etypes.
The same patch has gone into upstream heimdal as commit
a3bece1. It is a different solution to the problem fixed
here by commit 1f90983, so this commit will be reverted next
to keep compatibility with uptream.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
If the KDC requires a password change kinit will ask after the initial
authentication for a new password. After the password has been changed
it does reauthentication and for that it needs to use the new password
we just set.
It is needed for the a new kpasswd service test.
This is already fixed upstream with:
911c99375741281adae305f6ec3a3317023eba3e
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
