IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
dcerpc_interface_table struct rather then a tuple of interface
name, UUID and version.
This removes the requirement for having a global list of DCE/RPC interfaces,
except for these parts of the code that use that list explicitly
(ndrdump and the scanner torture test).
This should also allow us to remove the hack that put the authservice parameter
in the dcerpc_binding struct as it can now be read directly from
dcerpc_interface_table.
I will now modify some of these functions to take a dcerpc_syntax_id
structure rather then a full dcerpc_interface_table.
(This used to be commit 8aae0f168e)
This extracts a remote windows domain into a keytab, suitable for use
in ethereal for kerberos decryption.
For the moment, like net samdump and net samsync, the 'password
server' smb.conf option must be set to the binding string for the
server. eg:
password server = ncacn_np:mypdc
Andrew Bartlett
(This used to be commit 272013438f)
authentication. This pulls the creating of the keytab back to the
credentials code, and removes the special case of 'use keberos keytab
= yes' for now.
This allows (and requires) the callers to specify the credentials for
the server credentails to GENSEC. This allows kpasswdd (soon to be
added) to use a different set of kerberos credentials.
The 'use kerberos keytab' code will be moved into the credentials
layer, as the layers below now expect a keytab.
We also now allow for the old secret to be stored into the
credentials, allowing service password changes.
Andrew Bartlett
(This used to be commit 205f77c579)
an ADS join, particularly as a DC. This represents the bulk of his
Google SOC work, and I'm very pleased to intergrate it into the tree.
(Metze will intergrate the DRSUAPI work later).
Both metze and myself have also put a lot of time into this patch, and
in mentoring Brad in general. In return, Brad has been a very good
student, and has taken the comments well.
Since it's last appearance on samba-technical@, I have made
correctness and valgrind fixups, as well as adding a new 'BINDING'
mode to the libnet_rpc routines. This allows the exact binding string
to be passed down from the torture code, including options and exact
target host.
Andrew Bartlett
(This used to be commit d6fa105fda)
I still have issues with Win2k3 SP1, and Samba4 doesn't pass it's own
test for the moment, but I'm working on these issues :-)
This required a change to the credentials API, so that the special
case for NTLM logins using a principal was indeed handled as a
special, not general case.
Also don't set the realm from a ccache, as then it overrides --option=realm=.
Andrew Bartlett
(This used to be commit 194e8f07c0)
function interface used in the credentials code.
Fix bug in ntlm_auth, where we would overwrite the PW specified as a
first input. (Reported and chased by Kai Blin <blin@gmx.net>, bug
#3040)
Andrew Bartlett
(This used to be commit 04af95bd31)
Kerberos CCACHE into the system.
This again allows the use of the system ccache when no username is
specified, and brings more code in common between gensec_krb5 and
gensec_gssapi.
It also has a side-effect that may (or may not) be expected: If there
is a ccache, even if it is not used (perhaps the remote server didn't
want kerberos), it will change the default username.
Andrew Bartlett
(This used to be commit 6202267f6e)
the ndr_pull/push/print functions for it in the ntacl-lsm module
- fix compiler warnings in the ldap_encode_ndr_* code
metze
(This used to be commit 83d65d0d7e)
Autogenerate list of binaries (rather then having them hardcoded in build/smb_build/makefile.pm)
Add INSTALLDIR keyword to .mk files
(This used to be commit ce0935112b)
what WinXP does when joining an AD domain, but in the meantime this
removes the excess unions, and uses the LSA pipe in same way XP does.
Andrew Bartlett
(This used to be commit d2789c4260)
into LDB are actually quite easy.
This brings us the users, and sets basic domain information.
You are expected to have provisioned with the settings for the target
domain, and have joined the domain as a BDC. Then simply 'net
samsync'.
Now we just need to flesh out the delta types.
Andrew Bartlett
(This used to be commit 1e0f7792bb)
S390. This is an attempt to avoid the panic we're seeing in the
automatic builds.
The main fixes are:
- assumptions that sizeof(size_t) == sizeof(int), mostly in printf formats
- use of NULL format statements to perform dn searches.
- assumption that sizeof() returns an int
(This used to be commit a58ea6b385)
file_load() to use talloc, which impacted quite a few bits of code,
including our smb.conf processing.
took the opportunity to remove the gloabls in params.c while doing this
(This used to be commit b220756cb4)
event_context for the socket_connect() call, so that when things that
use dcerpc are running alongside anything else it doesn't block the
whole process during a connect.
Then of course I needed to change any code that created a dcerpc
connection (such as the auth code) to also take an event context, and
anything that called that and so on .... thus the size of the patch.
There were 3 places where I punted:
- abartlet wanted me to add a gensec_set_event_context() call
instead of adding it to the gensec init calls. Andrew, my
apologies for not doing this. I didn't do it as adding a new
parameter allowed me to catch all the callers with the
compiler. Now that its done, we could go back and use
gensec_set_event_context()
- the ejs code calls auth initialisation, which means it should pass
in the event context from the web server. I punted on that. Needs fixing.
- I used a NULL event context in dcom_get_pipe(). This is equivalent
to what we did already, but should be fixed to use a callers event
context. Jelmer, can you think of a clean way to do that?
I also cleaned up a couple of things:
- libnet_context_destroy() makes no sense. I removed it.
- removed some unused vars in various places
(This used to be commit 3a3025485b)
There is now a new --debug-stderr option to enable debug to STDERR.
popt isn't perfect, but the callbacks are used in all the main Samba
binaries, and should be used in the rest. This avoids duplicated
code, and ensures every binary is setup correctly.
This also ensures the setup happens early enough to have -s function,
and have a correct impact on the credentials code. (Fixing a bug that
frustrated tridge earlier today).
The only 'subtle' aspect of all this is that I'm pretty sure that the
SAMBA_COMMON popt code must be above the CREDENTIALS code, in the
popt tables.
Andrew Bartlett
(This used to be commit 50f3c2b3a2)
The main difference in this new version is the extra data structure generated
between the IDL data structure and the NDR parser:
IDL -> NDR -> { ndr_parser, ndr_header, eparser, etc }
This makes the ndr_parser.pm internals much more sane.
Other changes include:
- Remove unnecessary calls with NDR_BUFFERS (for example, GUID doesn't have any buffers, just scalars) as well as some (unnecessary) nested setting of flags.
- Parse array loops in the C code rather then calling ndr_pull_array(). This allows us to have, for example, arrays of pointers or arrays of pointers to arrays, etc..
- Use if() {} rather then if () goto foo; everywhere
- NDR_IN no longer implies LIBNDR_FLAG_REF_ALLOC
- By default, top level pointers are now "ref" (as is the default in
most other IDL compilers). This can be overridden using the
default_pointer_top() property.
- initial work on new ethereal parser generators by Alan DeKok and me
- pidl now writes errors in the standard format used by compilers, which
is parsable by most editors
- ability to warn about the fact that pidl extension(s) have been used,
useful for making sure IDL files work with other IDL compilers.
oh, and there's probably some other things I can't think of right now..
(This used to be commit 13cf227615)
done by setting:
OUTPUT_TYPE = SHARED_LIBRARY
in the [SUBSYSTEM::...] section belonging to a subsystem.
The idea is to allow multiple values to OUTPUT_TYPE simultaneously
(e.g. OUTPUT_TYPE = SHARED_LIBRARY, STATIC_LIBRARY, OBJLIST )
(This used to be commit b9d0ae93ba)
This brings in a compatability layer for Samba3 in Samba4 - where we
will start to define file formats and similar details.
The 'net samdump' command uses 'password server = ' for now, and
performs a similar task to Samba3's 'net rpc samsync'.
Andrew Bartlett
(This used to be commit 550f17f992)
GENSEC, and to pull SCHANNEL into GENSEC, by making it less 'special'.
GENSEC now no longer has it's own handling of 'set username' etc,
instead it uses cli_credentials calls.
In order to link the credentails code right though Samba, a lot of
interfaces have changed to remove 'username, domain, password'
arguments, and these have been replaced with a single 'struct
cli_credentials'.
In the session setup code, a new parameter 'workgroup' contains the
client/server current workgroup, which seems unrelated to the
authentication exchange (it was being filled in from the auth info).
This allows in particular kerberos to only call back for passwords
when it actually needs to perform the kinit.
The kerberos code has been modified not to use the SPNEGO provided
'principal name' (in the mechListMIC), but to instead use the name the
host was connected to as. This better matches Microsoft behaviour,
is more secure and allows better use of standard kerberos functions.
To achieve this, I made changes to our socket code so that the
hostname (before name resolution) is now recorded on the socket.
In schannel, most of the code from librpc/rpc/dcerpc_schannel.c is now
in libcli/auth/schannel.c, and it looks much more like a standard
GENSEC module. The actual sign/seal code moved to
libcli/auth/schannel_sign.c in a previous commit.
The schannel credentails structure is now merged with the rest of the
credentails, as many of the values (username, workstation, domain)
where already present there. This makes handling this in a generic
manner much easier, as there is no longer a custom entry-point.
The auth_domain module continues to be developed, but is now just as
functional as auth_winbind. The changes here are consequential to the
schannel changes.
The only removed function at this point is the RPC-LOGIN test
(simulating the load of a WinXP login), which needs much more work to
clean it up (it contains copies of too much code from all over the
torture suite, and I havn't been able to penetrate its 'structure').
Andrew Bartlett
(This used to be commit 2301a4b38a)
puts support for it into popt_common, adds a few utility functions
(in lib/credentials.c) and the callback functions for the command-line
(lib/cmdline/credentials.c). Comments are welcome :-)
(This used to be commit 1d49b57c50)
I wanted to add a simple 'workstation' argument to the DCERPC
authenticated binding calls, but this patch kind of grew from there.
With SCHANNEL, the 'workstation' name (the netbios name of the client)
matters, as this is what ties the session between the NETLOGON ops and
the SCHANNEL bind. This changes a lot of files, and these will again
be changed when jelmer does the credentials work.
I also correct some schannel IDL to distinguish between workstation
names and account names. The distinction matters for domain trust
accounts.
Issues in handling this (issues with lifetime of talloc pointers)
caused me to change the 'creds_CredentialsState' and 'struct
dcerpc_binding' pointers to always be talloc()ed pointers.
In the schannel DB, we now store both the domain and computername, and
query on both. This should ensure we fault correctly when the domain
is specified incorrectly in the SCHANNEL bind.
In the RPC-SCHANNEL test, I finally fixed a bug that vl pointed out,
where the comment claimed we re-used a connection, but in fact we made
a new connection.
This was achived by breaking apart some of the
dcerpc_secondary_connection() logic.
The addition of workstation handling was also propogated to NTLMSSP
and GENSEC, for completeness.
The RPC-SAMSYNC test has been cleaned up a little, using a loop over
usernames/passwords rather than manually expanded tests. This will be
expanded further (the code in #if 0 in this patch) to use a newly
created user account for testing.
In making this test pass test_rpc.sh, I found a bug in the RPC-ECHO
server, caused by the removal of [ref] and the assoicated pointer from
the IDL. This has been re-added, until the underlying pidl issues are
solved.
(This used to be commit 824289dcc2)
and remove unnecessary help functions as help is generated
automatically. Usage functions with precise information about
usage of each leaf node remain.
rafal
(This used to be commit eb66180d14)
of command groups. Also give up help function pointer in the
structure since it's needed only in leaf nodes of command tree,
and leaf nodes decide about help on their own. Usage function
is still available on all levels.
rafal
(This used to be commit 48568959a8)
less likely that anyone will use pstring for new code
- got rid of winbind_client.h from includes.h. This one triggered a
huge change, as winbind_client.h was including system/filesys.h and
defining the old uint32 and uint16 types, as well as its own
pstring and fstring.
(This used to be commit 9db6c79e90)
- change the iface_n_*() functions to return a "const char *" instead of a "struct ipv4_addr"
I think that in general we should move towards "const char *" for
all IP addresses, as this makes IPv6 much easier, and is also easier
to debug. Andrew, when you get a chance, could you fix some of the
auth code to use strings for IPs ?
- return a NTSTATUS error on bad name queries and node status instead
of using rcode. This makes the calling code simpler.
- added low level name release code in libcli/nbt/
- use a real IP in the register and wins nbt torture tests, as w2k3
WINS server silently rejects some operations that don't come from the
IP being used (eg. it says "yes" to a release, but does not in fact
release the name)
(This used to be commit bb1ab11d8e)
names on the network and answers name queries. Lots of details are
still missing, but at least this now means you don't need a Samba3
nmbd to use Samba4.
missing pieces include:
- name registrations should be "shout 3 times, then demand"
- no WINS server yet
- no master browser code
(This used to be commit d7d31fdc66)
acl format as we use in pvfs (and hopefully use common code too)
- removed a lot of old cruft from our autoconf tests. This may well break some builds,
but then we can fix them properly instead of the "if solaris version 5.1.2" crap
This was prompted by someone sending me solaris 10 patches that
patched the configure script with if statements for several more
versions of solaris to check for and do special stuff. That is just
silly.
(This used to be commit 1ea59d1146)
Like Samba3, the storage of the primary domain password is keyed off
the domain name, so we can join multiple domains, and just swap
'workgroup =' around.
Andrew Bartlett
(This used to be commit 54a231780e)
use function pointers anymore
- make the module init much easier
- a lot of cleanups
don't try to read the diff in auth/ better read the new files
it passes test_echo.sh and test_rpc.sh
abartlet: please fix spelling fixes
metze
(This used to be commit 3c0d16b823)
dcerpc_alter_context and multiple context_ids in the dcerpc client
library.
This stage does the following:
- split "struct dcerpc_pipe" into two parts, the main part being "struct dcerpc_connection", which
contains all the parts not dependent on the context, and "struct dcerpc_pipe" which has
the context dependent part. This is similar to the layering in libcli_*() for SMB
- disable the current dcerpc_alter code. I've used a #warning until i
get the 2nd phase finished. I don't know how portable #warning is, but
it won't be long before I add full alter context support anyway, so it won't last long
- cleanup the allocation of dcerpc_pipe structures. The previous code
was quite awkward.
(This used to be commit 4004c69937)
- added #if TALLOC_DEPRECATED around the _p functions
- fixes the code that broke from the above
while doing this I fixed quite a number of places that were
incorrectly using the non type-safe talloc functions to use the type
safe ones. Some were even doing multiplies for array allocation, which
is potentially unsafe.
(This used to be commit 6e7754abd0)
talloc_size() or talloc_array_p() where appropriate.
also fixed a memory leak in pvfs_copy_file() (failed to free a memory
context)
(This used to be commit 89b74b5354)
this is mostly just a tidyup, but also adds the privilege_mask, which
I will be using shortly in ACL checking.
note that I had to move the definition of struct security_token out of
security.idl as pidl doesn't yet handle arrays of pointers, and the
usual workaround (to use a intermediate structure) would make things
too cumbersome for this structure, especially given we never encode it
to NDR.
(This used to be commit 7b446af09b)
This reduces the total size of the samba binaries from 119 Mb to 73 Mb.
Next step will be to have the build system obtain some of this information
by itself, so that we don't have to write ~10 lines per interface manually.
(This used to be commit 16d905f6b0)
rather then a large table in librpc/gen_ndr/tables.c. This will allow us
to only link in only the required gen_ndr files (speeds up linking quite a
bit, makes binaries smaller).
Each gen_ndr_* file now has a init function that calls the init functions
of the interfaces it contains. I did it this way to keep pidl's code simple,
though it might hurt startup time a bit. I'd be happy to change it if
people like one function better.
(This used to be commit 3c436590ae)
- Use .mk files directly (no need for a SMB_*_MK() macro when adding a new SUBSYSTEM, MODULE or BINARY). This allows addition of new modules and subsystems without running configure
- Add support for generating .dot files with the Samba4 dependency tree (as used by the graphviz and springgraph utilities)
(This used to be commit 64826da834)
parsing, so that module init can take account of lp_ parms (thats
why gensec:krb5=no wasn't working)
- added a BASE-DISCONNECT torture test that tests server response to
clients disconnecting with open lock and open requests pending
(This used to be commit 5205f598b8)
Both subsystems and modules can now have init functions, which can be
specified in .mk files (INIT_FUNCTION = ...)
The build system will define :
- SUBSYSTEM_init_static_modules that calls the init functions of all statically compiled modules. Failing to load will generate an error which is not fatal
- BINARY_init_subsystems that calls the init functions (if defined) for the subsystems the binary depends on
This removes the hack with the "static bool Initialised = " and the
"lazy_init" functions
(This used to be commit 7a8244761b)
(user groups). The form of this is not final, but is this should be a
discussion point with the squid team.
Andrew Bartlett
(This used to be commit cbb0c67d06)
multiplexed helper system.
This system prefixes every request with a number, and we maintian a
state machine for each of these integers. This means that we can have
multiple outstanding challenges, without the overhead of a whole
ntlm_auth process.
In future, the actual password check will also be async.
Andrew Bartlett
(This used to be commit 9ea34abce3)
this brings us down to about 11k lines of headers included with
includes.h, while still retaining the speed of building with pch
(This used to be commit 10188869ef)
- tidied up some of the system includes
- moved a few more structures back from misc.idl to netlogon.idl and samr.idl now that pidl
knows about inter-IDL dependencies
(This used to be commit 7b7477ac42)
I have created the include/system/ directory, which will contain the
wrappers for the system includes for logical subsystems. So far I have
created include/system/kerberos.h and include/system/network.h, which
contain all the system includes for kerberos code and networking code.
These are the included in subsystems that need kerberos or networking
respectively.
Note that this method avoids the mess of #ifdef HAVE_XXX_H in every C
file, instead each C module includes the include/system/XXX.h file for
the logical system support it needs, and the details are kept isolated
in include/system/
This patch also creates a "struct ipv4_addr" which replaces "struct
in_addr" in our code. That avoids every C file needing to import all
the system networking headers.
(This used to be commit 2e25c71853)
rather than doing everything itself. This greatly simplifies the
code, although I really don't like the socket_recv() interface (it
always allocates memory for you, which means an extra memcpy in this
code)
- fixed several bugs in the socket_ipv4.c code, in particular client
side code used a non-blocking connect but didn't handle EINPROGRESS,
so it had no chance of working. Also fixed the error codes, using
map_nt_error_from_unix()
- cleaned up and expanded map_nt_error_from_unix()
- changed interpret_addr2() to not take a mem_ctx. It makes absolutely
no sense to allocate a fixed size 4 byte structure like this. Dozens
of places in the code were also using interpret_addr2() incorrectly
(precisely because the allocation made no sense)
(This used to be commit 7f2c771b0e)
by making our gensec structures a talloc child of the open connection
we can be sure that it will be destroyed when the connection is
dropped.
(This used to be commit f12ee2f241)
use it like:
net password set user
net password set DOM\\user
net password set user pass
net password set DOM\\user pass
net password set -U DOM\\Administrator%admpass DOM\\user pass
metze
(This used to be commit b660e5b9e6)
- add 'net password change' command
(it doesn'T work yet because libnet_rpc_connect() isn't implemented yet,
and we don't fill in the net_context user substruct yet)
metze
(This used to be commit 939da063cd)
- and remove all unneeded files
we'll reimplement the stuff step by step using the functions from
libnet/ which will do the hard work for us
metze
(This used to be commit 8b2d5ec973)
This implements gensec for Samba's server side, and brings gensec up
to the standards of a full subsystem.
This means that use of the subsystem is by gensec_* functions, not
function pointers in structures (this is internal). This causes
changes in all the existing gensec users.
Our RPC server no longer contains it's own generalised security
scheme, and now calls gensec directly.
Gensec has also taken over the role of auth/auth_ntlmssp.c
An important part of gensec, is the output of the 'session_info'
struct. This is now reference counted, so that we can correctly free
it when a pipe is closed, no matter if it was inherited, or created by
per-pipe authentication.
The schannel code is reworked, to be in the same file for client and
server.
ntlm_auth is reworked to use gensec.
The major problem with this code is the way it relies on subsystem
auto-initialisation. The primary reason for this commit now.is to
allow these problems to be looked at, and fixed.
There are problems with the new code:
- I've tested it with smbtorture, but currently don't have VMware and
valgrind working (this I'll fix soon).
- The SPNEGO code is client-only at this point.
- We still do not do kerberos.
Andrew Bartlett
(This used to be commit 07fd885fd4)
This layer is used for DCERPC security, as well as ntlm_auth at this
time. It expect things like SASL and the CIFS layer to use it as
well.
The particular purpose of this layer is to introduce SPENGO, which
needs generic access to the actual implementation mechanisms.
Schannel, due to it's 'interesting' setup properties is in GENSEC, but
is only in the RPC code.
Andrew Bartlett
(This used to be commit 902af49006)
I have moved the SPNEGO and Kerberos code into libcli/auth, and intend
to refactor them into the same format as NTLMSSP.
Andrew Bartlett
(This used to be commit 58da78a746)
added ldbedit, a _really_ useful command
added ldbadd, ldbdel, ldbsearch and ldbmodify to build
solved lots of timezone issues, we now pass the torture tests with
client and server in different zones
fixed several build issues
I know this breaks the no-LDAP build. Wait till I arrive in San Jose for that
fix.
(This used to be commit af34710d4d)
* updated tdb to latest version from Samba3
* removed some extraneous ';' in tdbutil.c (Thanks to Erlend Aasland
for pointing this out)
(This used to be commit f3eaf270e5)
test suite. The test suite dumps all of the interfaces available on
all pipes. There sure are a lot more interfaces on w2k3 than w2k !
(This used to be commit f94bc07990)
according to the current IDL taking the data from a file. In
combination with a little hack to ethereal to extract data this is a
quite powerful IDL development tool.
(This used to be commit 229a325c3c)
