IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If CTDB_USE_IPV6 is set then use IPv6 addresses for nodes and public
IPs. This can be useful for some simple tests. However, the node
address actually needs to be on lo so that ctdbd can bind to the port
on that address, so they actually need to be added as root before
running tests, like this:
for i in $(seq 1 10) ; do ip addr add "fc00:10::${i}/64" dev lo ; done
IPv4 127.0.0.0/8 addresses are somehow magic and only one needs to be
on lo so that many can be bound to.
Also change the IPv4 node addresses to be (slightly) more exotic.
For both IPv4 and IPv6, choose addresses that are compatible with
socket wrapper.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Amitay Isaacs <amitay@gmail.com> (socket wrapper fixes)
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net> (socket wrapper fixes)
Add checking to "releaseip" and "updateip" to ensure that the given IP
address is really on the given interface with the given netmask. If
reality doesn't match the given arguments then believe reality.
Use new function iptables_wrapper() instead of calling iptables()
directly.
Use new function flush_route_cache() instead of doing IPv4-specific
/proc magic.
Remove setting of otherwise unused variable "failed".
Fix a test for which the error message has changed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Also update associated eventscript unit tests and ctdb stub.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are parentheses missing that stop the default pattern from
matching commands with trailing garbage (e.g. "exportfs.orig").
A careful check of POSIX (and running GNU sed with --posix) suggests
that "\|" isn't a supported way of specifying alternation in a regular
expression. Therefore, it is clearer to switch to extended regular
expressions so that this has a chance of being portable (even though
the point is to print /proc/<pid>/stack, which only works on Linux).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Nov 18 06:37:45 CET 2014 on sn-devel-104
Also add and update tests for statd stack dumps. Update the existing
60.ganesha statd test to do more iterations. Duplicate the result as
a new test for 60.nfs.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
In the process, fix a bug where an extra trace would be printed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Remove --logfile and --syslog daemon options and replace with
--logging.
Modularise and clean up logging initialisation code. The
initialisation API includes an app_name argument that is currently
unused - this will be used in extensions to the syslog backend.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This makes the code cleaner and allows the syslog backend to be easily
modified without affecting other code. Also do some extra clean-up,
including whitespace fixups.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Internally map them to DEBUG_ERR to limit code churn.
This reduces the unwieldy number of debug levels used by CTDB. ALERT
and CRIT aren't of much use as separate errors, since everything from
ERR up should always be logged. In future just ERR can be used.
This also improves compatibility with Samba's debug.c system priority
mapping.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It isn't used and shouldn't be. CTDB can't make the system unusable.
Update associated test to ensure that EMERG isn't attempted. Actually
test all remaining debug levels and modernise the test a bit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use a variable to allow easy change of this string in case future
logging changes modify the timestamp format or do not support
timestamping.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
As far as we know, nobody uses this and it just complicates the
logging subsystem.
Remove all ringbuffer code and documentation. Update the local
daemons startup code correspondingly.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Some of this implements logic that exists in functions. Some of it is
overly complicated and potentially failure-prone.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The log ringbuffer will probably be removed. The test can be
implemented just as reliably by checking IP assignments using "ctdb
ip".
Update wait_until_ips_are_on_node() to print a more useful log
message.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The "-n all" is wrong.
Simplify the implementation and tighten up some uses of this function.
_select_test_node_and_ips() can't use this function anymore.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The glob functionality is unsed so simplify the code by removing it.
Rename this function to wait_until_ips_are_on_node(). Update all
calls.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Local daemons are started mainly for testing and usually not as root.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This makes it consistent with Samba, to ease transition.
Update unit test code to link to with tdb_wrap instead of including
db_wrap.c.
There are some potential whitespace fixes in this commit that have
been ignored. CTDB's lib/tdb_wrap will be deleted after the
transition to Samba's lib/tdb_wrap, so there's no point polishing it
too much.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Some declarations get lost because they basically get #define-d away,
so they need to be repeated after the #undef-s. Also, some functions
are introduced due the #define-s.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To avoid warnings when using --enable-developer, which uses
-Wmissing-prototypes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This event was introduced to handle misconfiguration. For example,
where all nodes where configured as NAT gateway slaves.
However, this event can fail when there are performance issues and
capabilities can't be retrieved from a remote node. The problem is
most likely with the remote node, so marking the local node UNHEALTHY
is probably a mistake.
Having a NAT gateway master node only matters in "ipreallocated", so
leave it to do the checking. Given that a node will run
"ipreallocated" as part of the first recovery, this should cause
misconfigurations to be detected nice and early.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Debugging can still be running when a monitor event times out and
scriptstatus output changes.
When debugging a hung script to a log file, write to a temporary file
and move the temporary file over the log file when done. The test
then waits for the log file to appear.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Thu Jul 3 08:19:23 CEST 2014 on sn-devel-104
About a year ago a check was added to _cluster_is_healthy() to make
sure that node 0 isn't in recovery. This was to avoid unexpected
recoveries causing tests to fail. However, it was misguided because
each test initially calls cluster_is_healthy() and will now fail if an
unexpected recovery occurs.
Instead, have cluster_is_healthy() warn if the cluster is in recovery.
Also:
* Rename wait_until_healthy() to wait_until_ready() because it waits
until both healthy and out of recovery.
* Change the post-recovery sleep in restart_ctdb() to 2 seconds and
add a loop to wait (for 2 seconds at a time) if the cluster is back
in recovery. The logic here is that the re-recovery timeout has
been set to 1 second, so sleeping for just 1 second might race
against the next recovery.
* Use reverse logic in node_has_status() so that it works for "all".
* Tweak wait_until() so that it can handle timeouts with a
recheck-interval specified.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Routines in system_common and system_<os> are supposed to be ctdb
functions with OS specific implementations.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Recent changes have caused these commands to attempt to get
capabilities from all nodes before doing further filtering. This
means that capabilities are unnecessarily fetched from nodes that are
unlikely to be the master. If such a node does not answer the control
then many nodes can fail to calculate the master node. In the case of
natgwlist this will cause "monitor" events to fail resulting in
unhealthy nodes.
Restore the behaviour where capabilities are only fetched for a node
that will be the master if it has the desired flags.
Although this masks a problem where a connected node is not replying,
it can help to avoid an outage in some cases.
Add supporting tests and infrastructure. Infrastructure just lets a
timeout be faked - just for ctdb_ctrl_getcapabilities_stub() so far.
First test checks that this infrastructure works if the first node
times out in natgwlist. Second test checks the case worked around by
the above fix - that is, no failure when a node with PNN beyond the
NATGW master can time out.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Thu May 29 05:59:37 CEST 2014 on sn-devel-104
The range
CTDB_PER_IP_ROUTING_TABLE_ID_LOW..CTDB_PER_IP_ROUTING_TABLE_ID_HIGH
should not include 253-255. Otherwise policy routing may overwrite
the default system routing tables.
Add some corresponding tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Commit 4ee4925d416a86341bd76c11fa99ec9173682a1d forgot about
CTDB_NATGW_SLAVE_ONLY so it introduces an incorrect failure when this
is set, and CTDB_NATGW_PUBLIC_IFACE or CTDB_NATGW_PUBLIC_IP is unset.
Relax the sanity check to see if CTDB_NATGW_SLAVE_ONLY is set.
Update the documentation to explicitly state that
CTDB_NATGW_PUBLIC_IFACE and CTDB_NATGW_PUBLIC_IP are optional and
unused if CTDB_NATGW_SLAVE_ONLY is set. It would be possible to
insist that CTDB_NATGW_PUBLIC_IFACE and CTDB_NATGW_PUBLIC_IFACE should
be unset in that case. However, it is more reasonable to allow
consistent configuration across nodes except with some nodes
configured slave-only.
Add tests, update infrastructure and fix a thinko in the stub's
"natgwlist" implementation.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Mon Apr 14 06:06:49 CEST 2014 on sn-devel-104
Commit ba69742ccd822562ca2135d2466e09bf1216644b missed the point of
filtering disconnected nodes while limiting the nodemap to those in
the NAT gateway group. It was really to avoid trying to fetch
capabilities from disconnected nodes. This should be explicitly done
in filter_nodemap_by_capabilities(), otherwise "ctdb natgwlist" simply
fails when there is a disconnected node.
Note that the alternate solution where filter_nodemap_by_flags() is
called before filter_nodemap_by_capabilities() would not be not
correct. Filtering on flags first can produce a "healthier" set of
nodes where none of them have the NAT gateway capability.
Also extend stub for ctdb_ctrl_getcapabilities() to fail when trying
to get capabilities from a disconnected node and add a corresponding
test to confirm that "ctdb natgwlist" is no longer broken.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This will test that ctdb_fetch_lock correctly revokes readonly
delegations.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
