IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This currently works when tests are run in-tree.
However, when installed, use of an incorrect variable means it fails
to find statd_callout in the tests/ subdirectory. Switch to using the
correct variable.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Anoop C S <anoopcs@samba.org>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Sun Oct 6 11:07:05 UTC 2024 on atb-devel-224
These should have caused test failure since commit
ef921bdbdb. However, the test failure
occurred in a sub-shell, which covered the failure. So, add an error
exit if the sub-shell fails.
While here, add an error exit for another potential uncaught
sub-shell-related failure in a related test.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Anoop C S <anoopcs@samba.org>
Saves lines, str_list_add_printf takes care of NULL checks
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Sun Sep 22 10:44:59 UTC 2024 on atb-devel-224
I could not find out how to cast a char ** to const char ** without
warning. This transfers fine to the execv call as well.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Aug 30 00:08:41 UTC 2024 on atb-devel-224
This was passed to CTDB's old smnotify. This has been replaced by use
of nfs-utils' sm-notify, which doesn't need this.
In test, a fake NFS_HOSTNAME is still needed. Real sm-notify will get
it from a reverse host lookup of the IP address.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB's smnotify does not support IPv6 and is difficult to maintain.
So, create directories of files and pass them to NFS util's sm-notify.
There is an implied change here, because NFS utils sm-notify stopped
sending IP addresses as mon_name back in 2010:
http://git.linux-nfs.org/?p=steved/nfs-utils.git;a=commitdiff;h=900df0e7c0b9006d72d8459b30dc2cd69ce495a5
This will change advice given in the wiki to use a hostname for the
cluster with round-robin DNS, since this is what is best supported.
Another behavioural change is that sm-notify only sends "up"
notifications with an odd state.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
statd callout will shortly be updated to use NFS utils' sm-notify.
This tiny helper will be used to create on-disk state files used by
sm-notify. These state files contain endian-specific fields, so
better to write a simple C implementation than to do crazy things in a
shell script (or call out to Python).
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If an NFS service check is set to, say, unhealthy_after=2 then it will
always switch from the (default startup) unhealthy state to healthy,
even if there is a fatal problem. If all services/scripts appear OK
then the node will become healthy. When the counter hits the limit it
will return to unhealthy. This is misleading.
Instead, never use the counter at startup, until the service becomes
healthy. This stops services flapping unhealthy-healthy-unhealthy.
A side-effect is that a service that starts in a broken state will
never be restarted to try to fix the problem. This makes sense. The
counting and restarting really exist to deal with problems that might
occur under load. The first monitor events occur before public IPs
are hosted, so there can be no load. If a service doesn't start
reliably the first time then the admin probably wants to know about
it.
nfs_iterate_test() is updated to run an initial monitor event to mark
the services as healthy. This initialises the counter so it can be
used for the important part of the test. Passing the -i option avoids
running the extra monitor event, so the first iteration will be the
initial monitor event.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This makes initial failure to retrieve statistics less likely to
result in a statistics change. To help with this, statistics
retrieval stderr now goes to the log - only stdout goes to the file.
This means that the test code for checking statistics changes needs to
be redone to actually run the statistics command and check. As with
rpcinfo output, this output needs to behave as deterministically in
the test code as it done in the event script.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Checking statistics is only really relevant to timeouts. That is, if
an rpcinfo times out it is worth checking if the service making
progress. If the RPC service is not registered then the statistics
don't need to be checked because they shouldn't be changing.
The 2 previously added tests added to check statistics progress now
behave identically and fail on all iterations. To support testing
with "timeouts", an optional TIMEOUT flag can now be added to the RPC
service passed to nfs_iterate_test(). 2 new tests are added to
exercise the new behaviour.
The 2 new "if" statements in nfs_iterate_test() could be combined.
However, a subsequent commit would split them and would be more
difficult to read.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Update the remaining RPC monitoring tests to use nfs_iterate_test(),
depending on it to set results. This makes all RPC monitoring tests
consistent, so they will all benefit from future improvements.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Doing this in a previous commit would have made it more difficult to
read that commit.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The early exits from the sub-shell make the obvious successes much
more obvious, and slightly simplify the code that follows.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Handling this across two different functions led to insanity, so
simplify.
The handling of unhealthy_after when $_numfails = 0 implicitly causes
the node to be healthy. This is how the "rpcinfo succeeds" case
works. Doing it this way for statistics makes this patch easier to
read. The implicit behaviour will go away in the next patch.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The current structure here is wrong and repetitive. Checking rpcinfo
result and determining output should be in the same place.
Failure counting is now contained in
rpc_set_service_failure_response(), but needs a file to survive the
sub-shell.
Don't attempt to combine and simplify code yet. That would make this
commit harder to review.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The output file is initialised, so doesn't need to be created on
success. Treat the return code file the same way.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Nothing more complex is ever done, so we might as well simplify and
reduce coupling.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If an RPC service is given, it is automatically marked down. This
avoids repetition in test cases and loosens coupling.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This one is in a rarely used error path, so call a function that
talloc()s the string instead.
Again, this will also print the port, which might be useful if we ever
add the ability to also specify ports in the nodes list.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Tue Aug 20 14:24:14 UTC 2024 on atb-devel-224
Same thing several times, so change to common failure code.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Node has been found, so use the pre-constructed name instead of
calling ctdb_addr_to_str().
This will also print the port, which might be useful if we ever add
the ability to also specify ports in the nodes list.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
The current constant value doesn't respect CTDB_TEST_MODE/CTDB_BASE.
Instead use the path module to allow automatic listening in test mode
with local daemons.
A single node can be tested with local daemons, using something like:
$ tests/local_daemons.sh foo setup -n 1 -C "node address"
$ grep "node address" foo/node.0/ctdb.conf
# node address = 127.0.0.1
$ tests/local_daemons.sh foo start all
$ tests/local_daemons.sh foo print-log 0 | grep -i chose
... node.0 ctdbd[24546]: ctdb chose network address 127.0.0.1:4379
The trick is that commenting out the node address in ctdb.conf means
the chosen node address is the first one from the nodes file that
allows bind/listen. In this case it is the only line.
The following ensures that automatic listening works for a node that
isn't the first:
$ cat >mynodes
192.168.1.1
127.0.0.1
$ tests/local_daemons.sh foo setup -n 2 -N mynodes -C "node address"
$ grep "node address" foo/node.1/ctdb.conf
# node address = 127.0.0.1
$ tests/local_daemons.sh foo start 1
$ tests/local_daemons.sh foo print-log 1 | grep -i chose
[...] node.1 ctdbd[22787]: ctdb chose network address 127.0.0.1:4379
Note that the first address isn't local on this host, so will always
fail.
So, doing the above and starting both nodes yields...
...
$ tests/local_daemons.sh foo start 1
$ sleep 3; tests/local_daemons.sh foo start 0
$ tests/local_daemons.sh foo print-log all | grep -i 'chose\|bind'
[...] node.1 ctdbd[26351]: ctdb chose network address 127.0.0.1:4379
[...] node.0 ctdbd[26438]: ctdb_tcp_listen_addr: Failed to bind() to socket - Address already in use (98)
[...] node.0 ctdbd[26438]: Unable to bind to any node address - giving up
... as expected.
It would be nice to add tests for this, but we don't really have
infrastructure for that. At least manual testing shows, for the
obvious cases, the previous commits didn't break anything. :-)
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
The node name is already constructed when the nodes file is loaded, so
just copy the node name.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Code to setup the transport is about to be cleaned up, including
removing uses of ctdb_set_error(), so avoid logging a NULL pointer or
some other old error.
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Add the initial documentation of the node list configuration parameter.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Tue Aug 6 01:50:12 UTC 2024 on atb-devel-224
Add a single line USENODESCOMMAND directive to the fake ctdb in order to
enable use of a nodes script instead of a nodes file. For simplicity
the fake ctdb always uses `nodes.sh` in the CTDB_BASE.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Similar to the recent changes to the ctdb server code, add the ability
to load the nodes from a subprocess stdout.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
In a future commit we will add support for loading the config file from
the `ctdb` command line tool. Prior to this change the config file load
func always called D_NOTICE that causes the command to emit new text and
thus break all the tests that rely on the specific test output (not to
mention something users could notice). This change plumbs a new
`verbose` argument into some of the config file loading functions.
Generally, all existing functions will have verbose set to true to match
the existing behavior. Future callers of this function can set it to
false in order to avoid emitting the extra text.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Rename ctdb_load_nodes_file to ctdb_load_nodes as it can now load nodes
from more than a regular file.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Rename the `struct ctdb_context` field nodes_file to nodes_source to
better match that the field may indicate something other than a true
file.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Use the new "nodes list" configuration option. Executing the given path
if the path is prefixed by a `!`. The use case is to decouple the nodes
file from the shared storage, especially in the case where the shared
storage is provided by a vfs module.
For an example, imagine a script that runs `curl` on a URL for a
highly-available web server where the URL provides the content
of the nodes file.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Add a "nodes list" configuration option to the [cluster] section of the
ctdb server config. This option will be used similarly to the `cluster
lock` parameter works. When unset it defaults to the same value as
before (/etc/ctdb/nodes). If given a path that is not prefixed by `!` it
instead loads the nodes file from the given path If given a path
prefixed by `!` then it executes the path as a command and reads the
standard output as if it were the content of the nodes file.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Add ctdb_read_nodes_cmd a function that works similarly to
ctdb_read_nodes_file but reads the nodes list from the stdout of a
subprocess instead of a file in the file system.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
