IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Assume all databases will support readonly mode for now and se thte flag for all databases. At later stage we will add support to control on a per database level whether delegations will be supported or not.
(This used to be ctdb commit 502f86f79944df4bac9094f716e54110c511dc24)
This function differs from the old FETCH in that this function will also fetch the record header and not just the record data
(This used to be ctdb commit c7196d16e8e03bb2a64be164d15a7502300eae0e)
Move struct ctdb_public_ip_list to ctdb_private.h and put some
definitions for some functions from ctdb_takeover.c there. This
allows those functions to be called from unit tests.
Add ctdb_takeover_tests.c and the Makefile support to build it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 9d34be0233edf3bc022345c0494c4b2a4d7f8480)
The current non-deterministic IP allocation algorithm balances IPs
across the whole cluster. It does not consider different
interfaces/VLANs/subnets, so these different groups of IPs aren't
generally well balanced.
This adds the LCP2 algorithm for IP allocation and allows it to be
enabled by setting the "LCP2PublicIPs" tunable to 1.
The LCP2 algorithm calculates the imbalance of a node by totalling the
squares of the distances between each IP on the node. The IP distance
is defined as the length longest common prefix (LCP) of bits that is
found when comparing 2 IPs. The imbalance of a cluster is the maximum
imbalance for any node. At each step the algorithm selects an
allocation to the IP/node combination that results in the choosing the
allocation that best reduces the imbalance of the cluster.
The implementation splits out the IP allocation part of
ctdb_takeover_run() into new function ctdb_takeover_run_core(), and
then extracts out the basic IP assignment code into new functions
basic_allocate_unassigned() and basic_failback(). 3 new functions
lcp2_init(), lcp2_allocate_unassigned() and lcp2_failback() implement
the LCP2 algorithm, and are hooked into ctdb_takeover_run_core().
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 61fc7fbd0235469df22deb6581c6bd47e30bc0be)
This is a flag that shall signa that a record has been automatically generated by ctdb
and not by an explicit client store operation. This will be used in the ctdb_ltdb_fetch
operation which stores an empty record with default initial header before trying to
migrate the record from the dmaster when the record does not exist in the local tdb.
(This used to be ctdb commit 46381a3cb58ccc11422af8f7798c80ea8d72294f)
This is realized by adding a ctdb_ltdb_store_fn function pointer to the db
context and filling it in the attach procedure for non-persistent dbs.
(This used to be ctdb commit df49ec44de80affa5ccc637dec12a20a26e8706e)
This is for the control dispatcher to check whether the input data has
a required minimum size.
(This used to be ctdb commit 2038e745db33cc5c3b4e2db8a00a57ede03906a2)
This will control how many fast-path vacuuming runs wil have to
be done, before a full vacuuming will be triggered, i.e. one with
a db-traversal.
(This used to be ctdb commit 0d997ec7e61a7bee2cb05456f9c7d5e6f7a44797)
This list will be filled by the client using a new
delete control. The list will then be used to implement
a fast-path vacuuming that will traverse this list instead
of traversing the database.
(This used to be ctdb commit 9bbedf786b26bb074f668b31f29a9032af958673)
This is to be used internally. The purpose is to flag a record
as been migrated by a VACUUM_MIGRATION, which is triggered by
a VACUUM_FETCH message as part of the vacuuming. The local store
routine will base its decision whether to delete or to store
the record (among other things) upon the value of this flag.
This flag should never be stored in the local database copies.
(This used to be ctdb commit dd2449c422f323f9b5485e45107a9cc5acc09e08)
This is to be used when the CTDB_SRVID_VACUUM_FETCH message
triggers the migration of deleted records to the lmaster.
The lmaster can then delete records that have not been
migrated with data instead of storing them.
(This used to be ctdb commit 455cc6616e10b7f09589f9b87cb60f591bb502b0)
This function walks all databases and checks for running trans3 commits.
It sends replies to all of them (with error code) and ends them.
To be called when a recovery finishes.
(This used to be ctdb commit 70ba153b532528bdccea70c5ea28972257f384c1)
One of which signals that the record has never been migrated to/from a node
while containing data.
This property "has never been migrated while non-zero" is important later
to provide heuristics on which records we might be able to purge
from the tdb files cheaply, i.e. without having to rely on the full-blown
database vacuum.
These records are belived to be very common and the pattern would look like
this :
1, no record exists at all.
2, client opens a file
3, samba requests the record for this file
4, an empty record is created on the LMASTER
5, the empty record is migrated to the DMASTER
6, samba writes a <sharemode> to the record locally and the record grows
7, client finishes working the file and closes the file
8, samba removes the sharemode and the record becomes empty again.
9, much later : vacuuming will delete the record
At stage 8, since the record has never been migrated onto a node wile being
non-zero it would be safe, and much more efficient to just delete the record
completely from the database and hand it back to the LMASTER.
The flags occupy the same uint32_t as was previously used for laccessor/lacount
in the header. For now, make sure the flags only define/use the top 16 bits
of this field so that we are sure we dont collide with bits set to one
from previous generations of the ctdb cluster database prior to this
change in semantics of this word.
This is a rework of Michaels patch :
commit 2af1a47cbe1a608496c8caf3eb0c990eb7259a0d
Author: Michael Adam <obnox@samba.org>
Date: Tue Nov 30 17:00:54 2010 +0100
add a DEFAULT record flag and a MIGRATED_WITH_DATA record flag.
(This used to be ctdb commit e075670dee8e6ecaba54986f87a85be3d0528b6b)
This concept didnt work out and it is really just as expensive as a full migration
anyway, without the benefit of caching the data for subsequence accesses.
Now, migrate the records immediately on first access.
This will be combined with a "cheap vacuum-lite" for special empty records to
prevent growth of databases.
Later extensions to mimic read-only behaviour of records will include proper shared read-only locking of database records, making the laccessor/lacount read-only access to the data obsolete anyway.
By removing this special case and handling of lacount laccessor makes the codapath where shared read-only locking will be be implemented simpler, and frees up space in the ctdb_ltdb header for use by vacuuming flags as well as read-only locking flags.
(This used to be ctdb commit 155dd1f4885fe142c6f8bd09430f65daf8a17e51)
Add a dlist to track all active lockwait child processes.
Everytime creating a new lockwait handle, check if there is already an
active lockwait process for this database/key and if so,
send the new request straight to the overflow queue.
This means we will only have one active lockwaic child process for a certain key,
even if there were thousands of fetch-lock requests for this key.
When the lockwait processing finishes for the original request, the processing in d_overflow() will automagically process all remaining keys as well.
Add back a --nosetsched argument to make it easier to run under gdb
(This used to be ctdb commit 3e9317a2e1f687b04bf51575d47fcd4faa6e6515)
Once we have more than 200 children waiting on a particular db, don't create
any more. Just put them on an overflow queue, and when a child gets a lock
search that queue to see if others were after the same lock (they probably
were).
(This used to be ctdb commit 5e614e8cfd1e9a4b13035a0e400b7a60a745b510)
scheduler for the child.
Use ctdb_fork() from callers where we dont want the child to be running
at real-time privilege.
(This used to be ctdb commit 58795a4c9e0624e20fa3e0023b65127053edd103)
Revert this patch:
commit 482c302d46e2162d0cf552f8456bc49573ae729d
We may need to use real-time processes for the main daemon and the recovery daemon to handle the cases where systems come under very high loads.
(This used to be ctdb commit 08bef9dcab6e4da15fc783f8624e5ed09aa060b5)
Add a new command "ctdb stats [num]" that prints the [num] most recent statistics intervals collected.
(This used to be ctdb commit e6e16fcd5a45ebd3739a8160c8fb5f44494edb9e)
define a new symbol to represent this range similarly to NFSD and ISCSID
Keep the old symbol name to be backward compatible with software using
these headers.
(This used to be ctdb commit 2ce34e50d057ba95249117a581658a5ad7e8eb60)
This function returns a pointer to a nodemap structure.
The returned structure must later be freed by calling ctdb_free_nodemap().
Move the definition of ctdb_sock_addr from ctdb_client.h to ctdb_protocol.h
Move the definition of the node flags, ctdb_node_and_flags and ctdb_node_map from ctdb_private.h to ctdb_protocol.h
Add both sync and async example for ctdb_getnodemap to the test application libctdb/tst.c
(This used to be ctdb commit 31c10eb2b337fd7d8a97a1f9e69b0e7570fec71d)
This is called everytime a reallocation is performed.
While STARTRECOVERY/RECOVERED events are only called when
we do ipreallocation as part of a full database/cluster recovery,
this new event can be used to trigger on when we just do a light
failover due to a node becomming unhealthy.
I.e. situations where we do a failover but we do not perform a full
cluster recovery.
Use this to trigger for natgw so we select a new natgw master node
when failover happens and not just when cluster rebuilds happen.
(This used to be ctdb commit 7f4c591388adae20e98984001385cba26598ec67)
Add a new "ctdb deltickle" command to delete tickles from the database.
This can ONLY be used for tickles created by "ctdb addtickle".
Push any "addtickle/deltickle" updates to other nodes every TickleUpdateInterval seconds'
(This used to be ctdb commit acded034e2f0dcae4c2c9e54e16a001caf23caec)
This means we can distinguish which child is logging, esp. via syslog where we have no pid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 68b3761a0874429b90731741f0531f76dcfbb081)
There are some reports of freeze timeouts, and it looks like vacuuming might
be the culprit. So we add code to tell them to abort when a freeze is
going on.
(This is based on the 1.0.112 branch version 517f05e42f, but far
simpler since tdb is now robust against processes being killed during
transaction commit)
CQ:S1018154 & S1018349
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit f5d7dc679501e607c2c83a248a89d3cada9df146)
In Samba this is now called "tevent", and while we use the backwards
compatibility wrappers they don't offer EVENT_FD_AUTOCLOSE: that is now
a separate tevent_fd_set_auto_close() function.
This is based on Samba version 7f29f817fa.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 85e5e760cc91eb3157d3a88996ce474491646726)
It turns out that we *do* want a separate private arg for the message
handler and the completion callback, so we change that.
We also fix the prototypes of the remove_message functions as we
implement them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 332375246eccd95da626f434f6d49dd9458a9787)
In include/ctdb.h, ctdb_callback_t and ctdb_rrl_callback_t were
defined with a void *private variable. The variable name was
changed to void *private_data to avoid issues encountered in
the Samba autoconf script.
Evan Kinney <evan.kinney@sas.com>
(This used to be ctdb commit 1f453aa4b5e749468c7788afac09c6f0900ea18f)
We've been seeing "Invalid packet of length 0" errors, but we don't know
what is sending them. Add a name for each queue, and print nread.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit e6cf0e8f14f4263fbd8b995418909199924827e9)
The extra recovery interval wait was introduced in 821333afb458 but no
explanation was provided in that message. Nonetheless, if starting
the entire cluster for the first time, it should be safe to skip this.
We use the commandline arg --sloppy-start which should discourage
people from using it outside testing.
Seconds between ctdbd first log message and node healthy:
BEFORE: 16.10
AFTER: 4.03
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 509e2e89ae233a0e91998d95267bf62f296a73cd)
Because this doesn't use a generic callback, it's not quite as trivial
as the other sync wrappers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 1f20b938d46d4fcd50d2b473c1ab8dc31d178d2d)
These are important for testing, since we can easily tell if we
leak memory if there are outstanding allocations after calling
these.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 18a212aa40d0ff9ff59775c6fcf9dc973e991460)
Ronnie and I tracked down a bug which seems to be caused by a node
running so slowly that we timed out the request and reused the request
id before it responded.
The result was that we unlocked the wrong record, leading to the
following:
ctdbd: tdb_unlock: count is 0
ctdbd: tdb_chainunlock failed
smbd[1630912]: [2010/06/08 15:32:28.251716, 0] lib/util_sock.c:1491(get_peer_addr_internal)
ctdbd: Could not find idr:43
ctdbd: server/ctdb_call.c:492 reqid 43 not found
This exact problem is now detected, but in general we want to delay
id reuse as long as possible to make our system more robust.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 9eb9c53ef29f4871ae2fe62fc5cb6145fca89eed)
I missed some int->bool conversions previously, particularly the
return of ctdb_writerecord().
By always handing functions ctdb_connection or ctdb_db, we keep it
consistent with the rest of the API and can do extra lock consistency
checks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 3f939956ddd693cba6ea5c655288f4f5ca95f768)
Now we have more messages, it seems to make sense to document their usage
and make them consistent.
In particular, LOG_CRIT for internal libctdb problems, LOG_ALERT for
API misuse.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit a6fed3f577c7ec51df38ed15ecb9db6ea2ae7c8f)
This allows us to keep the datastructure valid after the lock has been released by the application and we can trap and warn when the application is accessing the lock after it has been released. I.e. application bugs.
(This used to be ctdb commit 463a266205f145cd9c4c36b9c59d3747eeef0e2e)
Full documentation for all the functions.
This looks longer than it is, because it sorts them into async and
sync parts, and also renames some formal parameters.
Added TODO to libctdb directory to track our plans.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 108e9c2450876a9f8821aa7efd5be971eee5afd3)
We're best off including ctdb_protocol.h to get these, even if we
document the important ones in ctdb.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit cdc19dc73032470d57f38bf825d8113b3a0c8cd1)
Return bool instead of -1/0; that's what the young kids are doing
these days!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit e285b5d5a9d4fbc4f75dbb237d2fcdbd84f2d605)
This is based on Ronnie's work, merged with mine. That means
errors are all my fault.
Differences from Ronnie's:
1) use syslog's LOG_ levels directly.
2) typesafe arg to log function, and use it (eg stderr) in helper function.
3) store fn in ctdb context, and expose ctdb_log_level directly thru API.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 86259aa395555aaf7b2fae7326caa2ea62961092)
This is going to help for logging, since we want it there.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 0786152472bc43efae4c896f7c6c07c6e080b9b2)
After discussion with Ronnie, we decided to revisit this interface. We use
the name ctdb_readrecordlock_async, as it is *not* always a send, and we
use a specific callback to avoid the "fake request" creation on the fast
path.
The request itself is never exposed: this means it can't be cancelled,
but we can revisit that later if need be.
This makes both use and implementation simpler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 03b5546ae45a60ab41eb4f7159a45bfdbf959888)
PDUs are padded to 8 byte boundary. If padding is used, memset it to 0
to keep valgrind happy.
(This used to be ctdb commit 8818d5c483558c0faa6a3923ed5e675fdcfc13af)
and print the time startistics was taken and for how long the statistics have been collected to the "ctdb statistics" output.
(This used to be ctdb commit 1bdfe0cd3370a335b960ce1ef97eade93b0cd2fa)
Previously we could hang in poll with the callback pending (since we
fake it): explicitly call it immediately.
Note: I experienced corruption using DLIST_ADD_END (ctdb->pnn was blatted
when adding to the message_handler list). I switched them all to DLIST_ADD,
but maybe I'm using it wrong?
(This used to be ctdb commit 3727165f0d206999d2cfc2800ff8868640868c7c)
This is a bit tricky for those cases where we need to do multiple or
zero I/Os (eg. attachdb and readrecordlock), but works well for the
simple cases.
(This used to be ctdb commit ebe4dd724338c156423cfdcc10a75b68c2084cde)
These simplifications mostly came up due to the implementation.
o Rename ctdb_context to ctdb_connection.
We already have a ctdb_context internally in ctdbd; don't confuse them!
o Rename ctdb_handle to struct ctdb_request.
From the user POV it's a request, and it's also useful internally to
avoid implicit cast to/from void *.
o Rename ctdb_db_context to ctdb_db.
o Introduce ctdb_lock.
This provides an explicit "lock object" you get from readrecordlock
and have to hand to those functions which need you to hold a lock.
o status args are "int" not int32_t.
Should this be a bool?
o Remove last traces on generic callback.
Without semi-sync API, this doesn't help anything and loses type safety.
o Remove the semi-async API.
We can add this later, but I think a sync and async API is enough for
our poor users for the moment :)
o Registering a message handler also takes a callback.
This way you can tell if it failed. Not sure if this is overkill, but it's
consistent.
o ctdb_service() takes an revents arg
Strictly not necessary for a nonblocking fd, but nice to know if a
read or write is possible.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 86e1f93df856f9627182ed0e18bfcff6866c0954)
This imports ctdb.h and tst.c from Ronnie's work: it's a separate commit
for now to make the changes obvious.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 09f05cbfc883e5aac33d3781b163cde178ece4cf)
ctdb_client.h is the existing internal client interface (which was mainly
in ctdb.h), and ctdb_protocol.h is the information needed for the wire
protocol only.
ctdb.h will be the new, shiny, libctdb API.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 4bba6b8cd47b352f98d41f9f06258d5ac3c9adef)
This resolves a problem with huge numbers of requests which could overflow
16 bits. Fortunately, the IDR should scale reasonably well, so we can simply
hold all the requests.
Although noone checks for failure, I added a constant for that.
BZ: 60540
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 72efc4122e37798227c3420a65ed1f706ca9ebe7)
verify that all nodes agree on the most recent ip address assignments
broke "ctdb moveip ..." since that call would never trigger
a full takeover run and thus would immediately trigger an inconsistency.
Add a new message to the recovery daemon where we can tell the recovery daemon to update its assignments.
BZ62782
(This used to be ctdb commit e7069082e5f0380dcddee247db8754218ce18cab)
In the case of a timeout, we dump a log of what's happening to a file
in /tmp. We do it from the signal handler, which is an unreliable hack
(BZ58365).
Instead, create another (lower-priority) child to do the dump, then
kill the timedout script.
Note that this doesn't quite work as intended (the dump is often run
after the script has been killed), so the next patch resolves this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 7ee5ecc8d53e78e2dec21197b74a74cc4ae1834c)
addresses and verify that the remote nodes have/keep a consistent view of
assigned addresses.
If a remote node has an inconsistent view of addresses visavi the recovery
master this will trigger a full ip reallocation.
(This used to be ctdb commit f3bf2ab61f8dbbc806ec23a68a87aaedd458e712)
We know ask for the known and available interfaces.
This means a node gets a RELEASE_IP event for all interfaces
it "knows", but doesn't serve and a node only gets a TAKE_IP event
for "available" interfaces.
metze
(This used to be ctdb commit a695a38e49e7c3e15a9706392dc920eeab1f11ba)
This is needed because the "startup" event runs after the initial recovery,
but we need to do some actions before the initial recovery.
metze
(This used to be ctdb commit e953808449c102258abb6cba6f4abf486dda3b82)
configureable using --log-ringbuf-size=<num-entries>.
Add an entry in the sysconfig file to set this persistently.
(This used to be ctdb commit c79c2da69bc352f509e7fca4b9172a4b7f23c0f8)
We don't want ctdb stalling due to paging; this can be far worse than
scheduling delays. But if we simply do mlockall(MCL_FUTURE), it
increases the risk that mmap (ie. tdb open) or malloc will fail,
causing us to abort.
This patch is a compromise: we mlock all current pages (including
10k of future stack for expansion) and then relock when a client
asks us to open a TDB. We warn, but don't exit, if it fails.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 82f778e85440bc713d3f87c08ddc955d3cfce926)
1) It's buggy. Code needs to be carefully written (ie. no busy
loops) to handle running with it, and we fork and run scripts.[1]
2) It makes debugging harder. If ctdbd loops (as has happened recently)
it can be extremely hard to get in and see what's happening. We've already
seen the valgrind hacks.
3) We have seen recent scheduler problems. Perhaps they are unrelated,
but removing this very unusual setup is unlikely to hurt.
4) It doesn't make anything faster. Under all but the most perverse of
circumstances, 99% of the cpu gives the same performance as 100%, and
we will always preempt normal processes anyway.
[1] I made this worse in 0fafdcb8d353 "eventscript: fork() a child for
each script" by removing the switch_from_server_to_client() which
restored it, but even that was only for monitor scripts. Others were
run with RT priority.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 482c302d46e2162d0cf552f8456bc49573ae729d)
The do_setsched was being tested for whether to mmap tdbs: let's make it
explicit. We can also happily move the kill-child eventscript hack under
this flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 2ee86cc1f311d7b7504c7b14d142b9c4f6f4b469)
Depending on --max-persistent-check-errors we allow ctdb
to start with unhealthy persistent databases.
The default is 0 which means to reject a startup with
unhealthy dbs.
The health of the persistent databases is checked after each
recovery. Node monitoring and the "startup" is deferred
until all persistent databases are healthy.
Databases can become healthy automaticly by a completely
HEALTHY node joining the cluster. Or by an administrator
with "ctdb backupdb/restoredb" or "ctdb wipedb".
metze
(This used to be ctdb commit 15f133d5150ed1badb4fef7d644f10cd08a25cb5)
This reverts commit 401f421fa003d9515df15e759b50b56e0c67d69c.
Conflicts:
include/ctdb_private.h
server/ctdb_tunables.c
(This used to be ctdb commit b883d19a495a41a22db37f9c2cf6250fee529de0)
since we no longer ban nodes when dodgy scripts continue to hang.
We now only mark nodes as unhealthy if monitor events fail or timeout. Never ban.
(This used to be ctdb commit 5c8e56fc7a518e115bceac257867739283cf6a1e)
there is no rational need for a setting where we permanently mark nodes as disabled everytime an eventscript fails
(This used to be ctdb commit 68a8ee99b128a5ec883600735626bdb3bbc9c503)
This patch improves the handling of the fetch_lock operation on non-persistent
databases that ctdb clients have to do very frequently.
The normal flow how this goes is the following:
1. Client does a local fetch_lock on the database
2. Client looks if the local node is dmaster.
If yes, everything is fine
If no, continue here
3. Client unlocks the local record
4. Client issues a "get me the record" call to ctdbd
5. ctdbd goes out and fetches the dmaster role
6. ctdbd tells the client to retry
7. Client starts over again
The problem is between step 6 and 7: Before the client has had the chance to
retry (i.e. catch the record with a fetch_locked), another node might have come
asking ctdbd to migrate away the record again. This is a real problem, I've
seen >20 loops of this kind in real workloads.
This patch does the following: Whenever ctdb receives a record as result of
step 5, it puts the key on a "holdback list". As long as a key is on this list,
a request to migrate away the dmaster is put on hold. It is the client's duty
to issue the "CTDB_CONTROL_GOTIT" control when it has successfully done step 2
after having asked ctdb to fetch the record. This will release the key from the
"holdback list" and re-issue all dmaster migration requests.
As a safeguard against malicious clients, once a second (default 1000msecs,
tunable "HoldbackCleanupInterval" in milliseconds) ctdbd goes over the list of
held back keys, deletes them and releases all held back migration requests.
(This used to be ctdb commit 5736e17c139c9a8049e235429aeae0c6c9d0e93d)
This is a simplified version of the trans2 commit control:
It just rolls out the marshall buffer to all active nodes.
It is the main ctdbd part of the re-implementation of the
persistent transactions. The client code is changed to
take a global lock to start a transactions and store into
the marshal buffer instead of writing to the local tdb
under a local transaction.
The old transaction implementation is going to be
removed in a later commit.
Michael
(This used to be ctdb commit f66428f9d2013080a414404c1ba6117888352fd6)
Date: Wed, 9 Dec 2009 22:45:12 +0100
Subject: [PATCH] Revert an accidential commit
(This used to be ctdb commit af6656f2844d8fd72204a70358c9d589dbe1bd34)
This might be a bit less efficient, but experience in winbind has shown that
event callbacks can trigger changes in the socket state in very hard to
diagnose ways.
(This used to be ctdb commit a78b8ea7168e5fdb2d62379ad3112008b2748576)
We also no longer return an error before scripts have been run; a special
zero-length data means we have never run the scripts.
"ctdb scriptstatus all" returns all event script results.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 9b90d671581e390e2892d3a68f3ca98d58bef4df)
We're going to need this so ctdb can query non-monitor status.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 53bc5ca23ca55a3ac63a440051f16716944a2a51)
Rather than only tranferring to last_status for monitor events, do
it for every event (ctdb->last_status is now an array).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit c73ea56275d4be76f7ed983d7565b20237dbdce3)
We're going to allow fetching status of all script runs, so this
name is no longer appropriate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit f5cb41ecf3fa986b8af243e8546eb3b985cd902a)
A new helper functions which sets up an event attached to the child's
stdout/stderr which gets routed to the logging callback after being
placed in the normal logs.
This is a generalization of the previous code which was hardcoded to
call ctdb_log_event_script_output.
The only subtlety is that we hang the child fds off the output buffer;
the destructor for that will flush, which means it has to be destroyed
before the output buffer is.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 32cfdc3aec34272612f43a3588e4cabed9c85b68)
The child no longer uses ctdb_ctrl_event_script_init or
ctdb_ctrl_event_script_finished, and the others are redundant: it
doesn't need to tell us it's starting a script when it only runs one.
We move start and stop calls to the parent, and eliminate the RPC
infrastructure altogether.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 391926a87a7af73840f10bb314c0a2f951a0854c)
We put a "scripts" member in ctdb_event_script_state, rather than using
a special struct for monitor events. This will fit better as we further
unify the different events, and holds the reports from the child process
running each monitor script.
Rather than making the monitor state a child of current_monitor_status_ctx,
we just point current_monitor directly at it. This means we need to reset
that pointer in the destructor for ctdb_event_script_state.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 9a2b4f6b17e54685f878d75bad27aa5090b4571f)
We have monitor_event_script_ctx and other_event_script_ctx, and
current_monitor_status_ctx in struct ctdb_context. This seems more
complex than it needs to be.
We use a single "event_script_ctx" as parent for all event script
state structures. Then we explicitly reparent monitor events under
current_monitor_status_ctx: this is freed every script invocation to
kill off any running scripts anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 0d925e6f2767691fa561f15bbb857a2aec531143)
eventscript.c uses this now, but our next patch makes others use it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit a305cb7743c24386e464f6b2efab7e2108bb1e7e)
This unifies code paths and simplifies things: we just hand -ENOEXEC to
ctdb_ctrl_event_script_stop().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit eadf5e44ef97d7703a7d3bce0e7ea0f21cb11f14)
This starts the move toward more expressive encoding of return values:
positive values mean the script ran, negative means we had a problem with
the script (and the value is the errno).
This does timeout, but changes the ctdb tool to recognize it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 0eb1d0aa14e68b598d9e281c8a02b8f94a042fd9)
This simplifies the code a little: last_status is now read to go
(it's only used by the scriptstatus command at the moment).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 6be931266a4e41fd0253f760936ad9707dd97c47)
It is unlikely we will need something this verbose for normal troubleshooting.
This allows us to keep a significantly longer time interval of log messages
in the 500k slots available in the ringbuffer.
(This used to be ctdb commit cc99c05c0c6484ad574039a454e6133852cb41fa)
This controls is only used by samba when samba wants to check if a subrecord held by a <node-id>:<smbd-pid> is still valid or if it can be reclaimed.
If the node is banned or stopped, we kill the smbd process and return that the process does not exist to the caller. This allows us to recover subrecords from stopped/banned nodes where smbd is hung waiting for the databases to thaw.
bz58185
(This used to be ctdb commit 157807af72ed4f7314afbc9c19756f9787b92c15)
Add the mapping to the list everytime we accept() a new client connection
and set it up to remove in the destructor when the client structure is freed.
(This used to be ctdb commit f75d379377f5d4abbff2576ddc5d58d91dc53bf4)
Now we're doing checking, we might as well make sure the commands from
"ctdb eventscripts" are valid.
This gets rid of the "UNKNOWN" event type.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 1d24a3869fe89fc9a109fd9e9b69df5fc665a5f6)
Rather than doing strcmp everywhere, pass an explicit enum around. This
also subtly documents what options are available. The "options" arg
is now used for extra arguments only.
Unfortunately, gcc complains on empty format strings, so we make
ctdb_event_script() take no varargs, and add ctdb_event_script_args(). We
leave ctdb_event_script_callback() taking varargs, which means callers
have to do "%s", "".
For the moment, we have CTDB_EVENT_UNKNOWN for handling forced scripts
from the ctdb tool.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 8001488be4f2beb25e943fe01b2afc2e8779930d)
Everyone uses the same timeout value, so just remove it from the API.
If we ever need variable timeouts, that might as well be central too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 533c3e053293941d2a9484b495e78d45f478bb08)
command.
Use the existing context used for non-monitor events
Multiple concurrent uses of "ctdb eventscript ..." could otherwise lead to a SEGV
(This used to be ctdb commit 80a8d728e9680040e00d24361dfc9367dd372a56)
This allows running the actual monitoring asynchronously from ctdbd
and only using "status" to pick up the actual results.
(This used to be ctdb commit 1908bac812650ca25151051f5d86815e0b8ed319)
use a udp socket on the ctdbd port to send messages to teh syslog child process for loggign.
we need this when syslog becomes "slow", like very slow, and on boxes where syslog is limited to 100 lines per second and starts to block after that
(This used to be ctdb commit 1446f4c247310e2ff2d522055bd8927d1a78d017)
Otherwise a node can lock itself out, e.g. when a commit control times out...
Michael
(This used to be ctdb commit cb432e30351d5e5a41e98da3c7b1c2a4d400a3a2)
This aske the daemon wheter a transaction is currently active on a
given DB on that node. More precisely this asks for the transaction_active
flag in the ctdb_db_context that is set in the CTDB_TRANS2_COMMIT
control and cleared in the CTDB_TRANS2_ERROR or CTDB_TRANS2_FINISHED controls.
This will be useful for fixing race conditions in the transaction code.
Michael
(This used to be ctdb commit 8d430ae6968dfe566614379436fc3c56003fcd88)
add a global variable holding the pid of the main daemon.
change the tracking of time() in the event loop to only check/warn when called from the main daemon
(This used to be ctdb commit a10fc51f4c30e85ada6d4b7347b0f9a8ebc76637)
The way to use this is from a client to :
1, first create a message handle and bind it to a SRVID
A special prefix for the srvid space has been set aside for samba :
Only samba is allowed to use srvid's with the top 32 bits set like this.
The lower 32 bits are for samba to use internally.
2, register a "notification" using the new control :
CTDB_CONTROL_REGISTER_NOTIFY = 114,
This control takes as indata a structure like this :
struct ctdb_client_notify_register {
uint64_t srvid;
uint32_t len;
uint8_t notify_data[1];
};
srvid is the srvid used in the space set aside above.
len and notify_data is an arbitrary blob.
When notifications are later sent out to all clients, this is the payload of that notification message.
If a client has registered with control 114 and then disconnects from ctdbd, ctdbd will broadcast a message to that srvid to all nodes/listeners in the cluster.
A client can resister itself with as many different srvid's it want, but this is handled through a linked list from the client structure so it mainly designed for "few notifications per client".
3, a client that no longer wants to have a notification set up can deregister using control
CTDB_CONTROL_DEREGISTER_NOTIFY = 115,
which takes this as arguments :
struct ctdb_client_notify_deregister {
uint64_t srvid;
};
When a client deregisters, there will no longer be sent a message to all other clients when this client disconnects from ctdbd.
(This used to be ctdb commit f1b6ee4a55cdca60f93d992f0431d91bf301af2c)
Add a new tunable to control the maximum queue size we allow to a blocked client before we start discarding REQ_MESSAGES instead of queueing them for delivery.
This avoids having queued up very very large number of MESSAGES that samba semds
between eachother to nodes that are blocked/banned/stopped for extended periods
.
(This used to be ctdb commit f76d6fed8f9630450263b9fa4b5fdf3493fb1e11)
Add a tuneable so that when scripts starts to hang/timeout, we can make the node unhealthy instead of banned
(This used to be ctdb commit 2e9fc6f0609833c6d8146196011ef780669d615d)
master to perform an explicit ip reallocation.
This is more reliable and faster than having the recovery dameon track these
changes, and since we now have an explicit method to ask the recovery daemon
to perform an explicit ip reallocation, we should use this.
(This used to be ctdb commit 3807681e74f4bfe92befdae6ed616ff5f1a99880)
transactions we start across all tdb databased during the recovery.
this allows us to properly clean up and delete these tdb transactions on a
recovery failure.
(This used to be ctdb commit b2ce8b900a7d00944c84e0574fea5b371064a06d)
database priorities will be used to control in which order databases are locked during recovery in.
(This used to be ctdb commit 67741c0ee01916d94cace8e9462ef02507e06078)
This is useful when we are moving addresses using moveip in the cluster since otherwise if we collide with the recovery daemons own check we could cause a recovery
(This used to be ctdb commit 9c63858c0b22c81eaccb9865a414af0bbb2833d4)
Remove the explicit vacuum/repack commands from the 00.ctdb eventscript
and implement this in the ctdb daemon.
Combine vacuuming and repacking into one
cheap read traverse to enumerate all candidate records
and one write traverse that both repacks the database and also deletes the record locally where we are lmaster and where the records have already been deleted remotely.
this code also adds initial autotuning heuristics for the vacuum intervals and how many records to delete in each iteration.
minor stylish changes made by ronnie s
(This used to be ctdb commit 95a3ee551241aa164967991fe5efe078e1714bde)
In ctdb_client.c:ctdb_transaction_commit(), after a failed
TRANS2_COMMIT control call (for instance due to the 1-second
being exceeded waiting for a busy node's reply), there is a
1-second gap between the transaction_cancel() and
replay_transaction() calls in which there is no lock on the
persistent db. And due to the lack of global state
indicating that a transaction is in progress in ctdbd, other nodes
may succeed to start transactions on the db in this gap and
even worse work on top of the possibly already pushed changes.
So the data diverges on the several nodes.
This change fixes this by introducing global state for a transaction
commit being active in the ctdb_db_context struct and in a db_id field
in the client so that a client keeps track of _which_ tdb it as
transaction commit running on. These data are set by ctdb upon
entering the trans2_commit control and they are cleared in the
trans2_error or trans2_finished controls. This makes it impossible
to start a nother transaction or migrate a record to a different
node while a transaction is active on a persistent tdb, including
the retry loop.
This approach is dead lock free and still allows recovery process
to be started in the retry-gap between cancel and replay.
Also note, that this solution does not require any change in the
client side.
This was debugged and developed together with
Stefan Metzmacher <metze@samba.org> - thanks!
Michael
(This used to be ctdb commit f88103516e5ad723062fb95fcb07a128f1069d69)
This event is called when a node is stopped and is used by eventscripts that need to do certain cleanup and removal of configuration or ip addresses or routing ...
Note that a STOPPED node is considered "inactive" and as such will not be running the "recovered" event when the rest of the cluster has recovered.
(This used to be ctdb commit 65e9309564611bf937ded3c74a79abff895d7c59)
This node flag means the node is DISABLED and that all its public ip addresses
are failed over, but also that it has been removed from the VNNmap.
A STOPPED node should be in recovery mode active untill restarted using the continue command.
Adding two new commands "ctdb stop" "ctdb continue"
(This used to be ctdb commit d47dab1026deba0554f21282a59bd172209ea066)
validate the input values used and refuse setting the debug level to an unknown value
(This used to be ctdb commit daec49cea1790bcc64599959faf2159dec2c5929)
This is used to mark nodes as being DELETED internally in ctdb
so that nodes are not renumbered if / when they are removed from the nodes file.
This is used to be able to do "ctdb reloadnodes" at runtime without
causing nodes to be renumbered.
To do this, instead of deleting a node from the nodes file, just comment it out like
1.0.0.1
#1.0.0.2
1.0.0.3
After removing 1.0.0.2 from the cluster, the remaining nodes retain their
pnn's from prior to the deletion, namely 0 and 2
Any line in the nodes file that is commented out represents a DELETED pnn
(This used to be ctdb commit 6a5e4fd7fa391206b463bb4e976502f3ac5bd343)
Log this in "ctdb statistics".
Also add a varaible "RecLockLatencyMs" that will log an error everytime it takes longer than this to access the reclock file.
(This used to be ctdb commit 042377ed803bb8f7ca9d6ea1a387427b7b8ba45a)
When a client (such as smbstatus) is killed, it may have outstanding
traverse children on remote nodes. We need to catch the client
disconnect in ctdbd and send a control to all nodes telling them to
kill those outstanding traverse children.
(This used to be ctdb commit f2fb2df4619a14f7f6c11f9132ee7d793028042c)
this now defaults to 60 seconds
This is useful if a split brain occurs due to network partitioning since it will make sure that the "other half" of the cluster that does not contain the recovery master will eventually release all ips and thus avoiding a duplicate ip situation for the public addresses
(This used to be ctdb commit 70f21428c9eec96bcc787be191e7478ad68956dc)
Rename the variable to SeqnumInterval for
1, it is an interval and not a 1/interval unit
2, so that we catch when people use this old variable and can update the sysconfig file instead of silently changin semantics of this variable
this is a real dodgy variable
(This used to be ctdb commit 68eac459e5d2b6b534f72821036675ffe5d7a350)
This would allow a sysadmin to set up ctdb to send an email/snmptrap/... when the status of the node changes.
(This used to be ctdb commit ce534a83a05dbd40238e4eee0669d60ff396f935)
this command shows which eventscripts were executed during the last monitoring cycle and the status from each eventscript.
If an eventscript timedout or returned an error we also
show the output from the eventscript.
Example :
[root@rcn1 ctdb-git]# ./bin/ctdb scriptstatus
6 scripts were executed last monitoring cycle
00.ctdb Status:OK Duration:0.021 Mon Mar 23 19:04:32 2009
10.interface Status:OK Duration:0.048 Mon Mar 23 19:04:32 2009
20.multipathd Status:OK Duration:0.011 Mon Mar 23 19:04:33 2009
40.vsftpd Status:OK Duration:0.011 Mon Mar 23 19:04:33 2009
41.httpd Status:OK Duration:0.011 Mon Mar 23 19:04:33 2009
50.samba Status:ERROR Duration:0.057 Mon Mar 23 19:04:33 2009
OUTPUT:ERROR: Samba tcp port 445 is not responding
Add a new helper function "switch_from_server_to_client()" which both
the recovery daemon can use as well as in the child process we start for running the actual eventscripts.
Create several new controls, both for the eventscript child process to inform the master daemon of the current status of the scripts as well as for the ctdb tool to extract this information from the runninc daemon.
(This used to be ctdb commit c98f90ad61c9b1e679116fbed948ddca4111968d)
a ctdb client instance.
use this from the recovery daemon child process to switch to client mode
and connect back to the main daemon
(This used to be ctdb commit 16f31786a031255ab5b3099a0a3c745de973347a)
This is not portable.
The ctdb build includes the necessary headers from includes.h.
And users of ctdb should cope with including the necessary
prerequisite headers themselves.
Michael
(This used to be ctdb commit fedc6983f5dee39152e6f400f89a3e07eab57f0c)
(for struct sockaddr to be defined)
Thanks to William Jojo <w.jojo@hvcc.edu> for reporting.
Michael
(This used to be ctdb commit 7558bca1e99884c02747adb7cbea799d04ee24d5)
allow clients to register either ipv4 or ipv6 client connections to the tickles list
(This used to be ctdb commit d9b44d7c3255b0fd7359b9afeb613e6ff4c4eaac)
modify the transport methods to allow to restart individual connections
and set up destructors properly.
only tear down/set-up tcp connections to nodes removed from the cluster
or nodes added to the cluster.
Leave tcp connections to unchanged nodes connected.
make "ctdb reloadnodes" explicitely cause a recovery of the cluster once
the files have been realoaded
(This used to be ctdb commit d1057ed6de7de9f2a64d8fa012c52647e89b515b)
race between the ctdb tool and the recovery daemon both at once
trying to push flag changes across the cluster.
(This used to be ctdb commit a9a1156ea4e10483a4bf4265b8e9203f0af033aa)
log the type of operation and the database name for all latencies higher
than a treshold
(This used to be ctdb commit 1d581dcd507e8e13d7ae085ff4d6a9f3e2aaeba5)
fallback to the old-style ipv4-only controls if the new-style ipv4/ipv6
control fails.
this allows a 1.0.59+ (ipv4/ipv6) ctdb daemon being recmaster to be
compatible with
pre-1.0.59 versions of ctdb that are ipv4 only.
(This used to be ctdb commit 8e912abc2c68f5fe7b06c600ba6fec1a6900127c)
older ipv4-only version of these controls.
We need this so that we are backwardcompatible with old versions of ctdb
and so that we can interoperate with a ipv4-only recmaster during a
rolling upgrade.
(This used to be ctdb commit 6b76c520f97127099bd9fbaa0fa7af1c61947fb7)
correctly by measuring how long it was since the last successful
communication with the recovery daemon was recorded.
After a certain timeout the ctdb daemon would deem the recovery daemon
as inoperable and shut down.
If the system clock is suddenly changed forward by many (60 or more)
seconds this could cause the timeout to trigger prematurely/immediately
where ctdb would incorrectly think that more than 60 seconds had passed
since last successful communications and thus abort.
Instead of cehcking for one timeout occuring, only deem the recovery
daemon to be "down" and trigger a shutdown if communications have
timedout for three intervals in a row.
(This used to be ctdb commit 196968c552e6ebcb57389d769a4b25f42fa8bc5d)
we currently only monitor that the dameons are running by kill(0, pid)
and verifying the the domain socket between them is ok.
this is not sufficient since we can have a situation where the recovery
daemon is hung.
this new code monitors that the recovery daemon is operating.
if the recovery hangs, we log this and shut down the main daemon
(This used to be ctdb commit cd69d292292eaab3aac0e9d9fc57cb621597c63c)
the difference between a initial commit attempt and a retry, which
allows us to get the persistent updates counter right for retries
(This used to be ctdb commit 7f29c50ccbc7789bfbc20bcb4b65758af9ebe6c5)
This file creates additional locking stress on the backend filesystem and we may not need it anyway.
(This used to be ctdb commit 84236e03e40bcf46fa634d106903277c149a734f)
change one element from private to private_data
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
(This used to be ctdb commit 0de79352c9b36c118e36905f08ebbe38ecbb957e)
This allows ctdb to automatically start a new full blown recovery
if a client has started updating the local tdb for a persistent database
but is kill -9ed before it has ensured the update is distributed clusterwide.
(This used to be ctdb commit 1ffccb3e0b3b5bd376c5302304029af393709518)
This is a hack to allow backtraces under valgrind to show what opcode
is getting uninitialised bytes
(This used to be ctdb commit 67bb12c8f0af5914efb44b76bc6ddbb11fc0fcdf)
make ctdb uptime print how long the recovery took
in the recovery daemon when we check that the public ip address
allocation on the local node is correct (we have the ips we should have
and we dont have any we shouldnt have) use ctdb uptime and check the
recovery start/stop times and make sure we dont check for ip allocation
inconsistencies during a recovery where the ip address allocation is in flux.
(This used to be ctdb commit f86551580349b7f662f9a07e4eb0c1189e38e429)
this callback is called for every node where the control failed (or timed out)
when we issue the start recovery control from recovery master,
set any node that fails as a culprit so it will eventually be banned
(This used to be ctdb commit 72f89bac13cbe8c3ca3e7a942469cd2ff25abba2)
ctdb_attach() so that we can pass TDB_NOSYNC when we attach to
a persistent database and want fast unsafe writes instead of
slow but safe tdb_transaction writes.
enhance the ctdb_persistent test suite to test both safe and unsafe writes
(This used to be ctdb commit 4948574f5a290434f3edd0c052cf13f3645deec4)
for stores into persistent databases, ALWAYS use a lockwait child take out the lock for the record and never the daemon itself.
(This used to be ctdb commit 7fb6cf549de1b5e9ac5a3e4483c7591850ea2464)
This enhances the framework for sending tcp tickles to be able to send ipv6 tickles as well.
Since we can not use one single RAW socket to send both handcrafted ipv4 and ipv6 packets, instead of always opening TWO sockets, one ipv4 and one ipv6 we get rid of the helper ctdb_sys_open_sending_socket() and just open (and close) a raw socket of the appropriate type inside ctdb_sys_send_tcp().
We know which type of socket v4/v6 to use based on the sin_family of the destination address.
Since ctdb_sys_send_tcp() opens its own socket we no longer nede to pass a socket
descriptor as a parameter. Get rid of this redundant parameter and fixup all callers.
(This used to be ctdb commit 406a2a1e364cf71eb15e5aeec3b87c62f825da92)
If a transaction could be started, do safe transaction store when updating the record inside the daemon.
If the transaction could not be started (maybe another samba process has a lock on the database?) then just do a normal store instead (instead of blocking the ctdb daemon).
The client can "signal" ctdb that updates to this database should, if possible, be done using safe transactions by specifying the TDB_NOSYNC flag when attaching to the database.
The TDB flags are passed to ctdb in the "srvid" field of the control header when attaching using the CTDB_CONTROL_DB_ATTACH_PERSISTENT.
Currently, samba3.2 does not yet tell ctdbd to handle any persistent databases using safe transactions.
If samba3.2 wants a particular persistent database to be handled using
safe transactions inside the ctdbd daemon, it should pass
TDB_NOSYNC as the flags to the call to attach to a persistent database
in ctdbd_db_attach() it currently specifies 0 as the srvid
(This used to be ctdb commit 8d6ecf47318188448d934ab76e40da7e4cece67d)
This allows us to use the async framework also for controls that return
outdata.
Add a "capabilities" field to the ctdb_node structure. This field is
only initialized and kept valid inside the recovery daemon context and not
inside the main ctdb daemon.
change the GET_CAPABILITIES control to return the capabilities in outdata instead of in the res return variable.
When performing a recovery inside the recovery daemon, read the capabilities from all connected nodes and update the ctdb->nodes list of nodes.
when building the new vnnmap after the database rebuild in recovery, do not include any nodes which lack the LMASTER capability in the new vnnmap.
Unless there are no available connected node that sports the LMASTER capability in which case we let the local node (recmaster) take on the lmaster role temporarily (i.e. become a member of the vnnmap list)
(This used to be ctdb commit 0f1883c69c689b28b0c04148774840b2c4081df6)
Define two capabilities :
can be recmaster
can be lmaster
Default both capabilities to YES
Update the ctdb tool to read capabilities off a node
(This used to be ctdb commit 50f1255ea9ed15bb8fa11cf838b29afa77e857fd)
remove the transaction stuff and push so that the git tree will work
This reverts commit 539bbdd9b0d0346b42e66ef2fcfb16f39bbe098b.
(This used to be ctdb commit 876d3aca18c27c2239116c8feb6582b3a68c6571)
