IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
one small todo item is to add a 'accounts' sub option
to 'net rpc list' so enumerate all privileged SIDs
and their associated rights.
(This used to be commit bf4385c79a0ce2e4983ffa11d39367dbf1d4dcfd)
(based on Simo's code in trunk). Rewritten with the
following changes:
* privilege set is based on a 32-bit mask instead of strings
(plans are to extend this to a 64 or 128-bit mask before
the next 3.0.11preX release).
* Remove the privilege code from the passdb API
(replication to come later)
* Only support the minimum amount of privileges that make
sense.
* Rewrite the domain join checks to use the SeMachineAccountPrivilege
instead of the 'is a member of "Domain Admins"?' check that started
all this.
Still todo:
* Utilize the SePrintOperatorPrivilege in addition to the 'printer admin'
parameter
* Utilize the SeAddUserPrivilege for adding users and groups
* Fix some of the hard coded _lsa_*() calls
* Start work on enough of SAM replication to get privileges from one
Samba DC to another.
* Come up with some management tool for manipultaing privileges
instead of user manager since it is buggy when run on a 2k client
(haven't tried xp). Works ok on NT4.
(This used to be commit 77c10ff9aa6414a31eece6dfec00793f190a9d6c)
Also fix return of NT_STATUS_NO_MORE_ENTRIES should be
ERROR_NO_MORE_ITEMS reported by "Marcin Porwit" <mporwit@centeris.com>.
Jeremy.
(This used to be commit 511cdec60d431d767fb02f68ca5ddd4ddb59e64a)
supported pipe. Netlogon is still special, as we open that twice, one to do
the auth2, the other one with schannel.
The client interface is completely unchanged for those who only use a single
pie. cli->pipe_idx is used as the index for everything except the "real"
client rpc calls, which have been explicitly converted in my last commit. Next
step is to get winbind to just use a single smb connection for multiple pipes.
Volker
(This used to be commit dc294c52e0216424236057ca6cd35e1ebf51d0da)
patches.
Pass down the pipe_idx down to all functions in cli_pipe where nt_pipe_fnum is
referenced. First step towards having multiple pipes on a cli_struct. The idea
is to not have a single nt_pipe_fnum but an array for the pipes we support.
Volker
(This used to be commit 93eab050201d4e55096a8820226749f001597b5d)
The old #ifdef JRATEST-block was copying 16 bytes and thus overwriting
acct_flags with bizarre values, breaking a lot of things.
This patch is successfully running in a production environment for quite
some time now and is required to finally allow Exchange 5.5 to access
another Exchange Server when both are running on NT4 in a
samba-controlled domain. This also allows Exchange Replication to take
place, Exchange Administrator to access other Servers in the network,
etc. Fixes Bugzilla #1136.
Thanks abartlet for helping me with that one.
Guenther
(This used to be commit bd4c5125d6989cebc90152a23e113b345806c660)
functions so we can funnel through some well known functions. Should help greatly with
malloc checking.
HEAD patch to follow.
Jeremy.
(This used to be commit 620f2e608f70ba92f032720c031283d295c5c06a)
(usersidlist/allowedusers) to scan a file server's share and list all users
who have permission to connect there.
Volker
(This used to be commit f7f84aa1ded70af3882e4122f34d5c7eed746993)
* add IA64 to the architecture table of printer-drivers
* add new "net"-subcommands:
net rpc printer migrate {drivers|printers|forms|security|settings|all}
[printer]
net rpc share migrate {shares|files|all} [share]
this is the first part of the migration suite. this will will (once
feature-complete) allow to do 1:1 server-cloning in the best possible way by
making heavy use of samba's rpc_client-functions. all migration-steps
are implemented as rpc/smb-client-calls; net communicates via rpc/smb
with two servers at the same time (a remote, source server and a
destination server that currently defaults to the local smbd). this
allows e. g. printer-driver migration including driverfiles, recursive
mirroring of file-shares including file-acls, etc. almost any migration
step can be called with a migrate-subcommand to provide more flexibility
during a migration process (at the cost of quite some redundancy :) ).
"net rpc printer migrate settings" is still in a bad condition (many
open questions that hopefully can be adressed soon).
"net rpc share migrate security" as an isolated call to just migrate
share-ACLs will be added later.
Before playing with it, make sure to use a test-server. Migration is a
serious business and this tool-set can perfectly overwrite your
existing file/print-shares.
* along with the migration functions had to make I the following
changes:
- implement setprinter level 3 client-side
- implement net_add_share level 502 client-side
- allow security descriptor to be set in setprinterdata level 2
serverside
guenther
(This used to be commit 8f1716a29b7e85baf738bc14df7dabf03762f723)
On systems with /dev/urandom, this avoids a change to secrets.tdb for every fork().
For other systems, we now only re-seed after a fork, and on startup.
No need to do it per-operation. This removes the 'need_reseed'
parameter from generate_random_buffer().
Andrew Bartlett
(This used to be commit 36741d3cf53a7bd17d361251f2bb50851cdb035f)
for setting up an schannel connection. This solves the problem
of a Samba DC running winbind, trusting a native mode AD domain,
and needing to enumerate AD users via wbinfo -u.
(This used to be commit e9f109d1b38e0b0adec9b7e9a907f90a79d297ea)
group_info4 in set_dom_group_info also has the level in the record
itself. This seems not to be an align. Tested with NT4 usrmgr.exe. It can
still create a domain group on a samba machine.
Volker
(This used to be commit 76c75bb8a7ad2a2e719dbbe997abf8aefe2fbbb4)
As well as avoiding DOS charset issues, this scheme returns useful error
codes, that we can map back via the pam interface.
This patch also cleans up the interfaces used for password buffers, to
avoid duplication of code.
Andrew Bartlett
(This used to be commit 2a2b1f0c872d154fbcce71a250e23dfad085ba1e)
domains, this patch ensures that we always use the ADS backend when
security=ADS, and the remote server is capable.
The routines used for this behaviour have been upgraded to modern Samba
codeing standards.
This is a change in behaviour for mixed mode domains, and if the trusted
domain cannot be reached with our current krb5.conf file, we will show
that domain as disconnected.
This is in line with existing behaviour for native mode domains, and for
our primary domain.
As a consequence of testing this patch, I found that our kerberos error
handling was well below par - we would often throw away useful error
values. These changes move more routines to ADS_STATUS to return
kerberos errors.
Also found when valgrinding the setup, fix a few memory leaks.
While sniffing the resultant connections, I noticed we would query our
list of trusted domains twice - so I have reworked some of the code to
avoid that.
Andrew Bartlett
(This used to be commit 7c34de8096b86d2869e7177420fe129bd0c7541d)
would attempt to supply a password to the 'inside' NTLMSSP, which the
remote side naturally rejected.
Andrew Bartlett
(This used to be commit da408e0d5aa29ca1505c2fd96b32deae9ed940c4)
rpc_parse/parse_lsa.c:
nsswitch/winbindd_rpc.c:
nsswitch/winbindd.h:
- Add const
libads/ads_ldap.c:
- Cleanup function for use
nsswitch/winbindd_ads.c:
- Use new utility function ads_sid_to_dn
- Don't search for 'dn=', rather call the ads_search_retry_dn()
nsswitch/winbindd_ads.c:
include/rpc_ds.h:
rpc_client/cli_ds.c:
- Fixup braindamage in cli_ds_enum_domain_trusts():
- This function was returning a UNISTR2 up to the caller, and
was doing nasty (invalid, per valgrind) things with memcpy()
- Create a new structure that represents this informaiton in a useful way
and use talloc.
Andrew Bartlett
(This used to be commit 06c3f15aa166bb567d8be0a8bc4b095b167ab371)
defaults specified by the caller to prevail.
Don't use NTLM2 for RPC pipes, until we know how it works in signing or sealing.
Call ntlmssp_sign_init() unconditionally in the client - we setup the
session key, why not setup the rest of the data.
Andrew Bartlett
(This used to be commit 48123f7e42c3fde85887de23c80ceee04c2f6281)
This means that we now support 'net rpc join' with KRB5 (des based)
logins. Now, you need to hack 'net' to do that, but the principal is
important...
When we add kerberos to 'net rpc', it should be possible to still do
user management and the like over RPC.
(server-side support to follow shortly)
Andrew Bartlett
(This used to be commit 9ecf9408d98639186b283f1acf0fac46417547d0)
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
the bind response to WKSSVC it does not send \PIPE\ntsvcs as NT4 (did not
check w2k) but \PIPE\wkssvc. I'm not sure whether we should make this check at
all, so making it a bit more liberal should hopefully not really hurt.
Volker
(This used to be commit 029dcb351bcfab70ed0afa4acf4bd64316bfd757)
to all requests on the winreg pipe, so we need to handle this new pipe.
First part of fix for bug #534
(This used to be commit 532fab74c12d8c55872c2bad2abead2647f919d7)
In cli_lsa_lookup_sids don't leave the domain field uninitialized if
some sid could not be mapped. Otherwise this call is unnecessarily
complicated to call.
Volker
(This used to be commit 198b01fc54ce7a5beeddc680b30da291639b4eda)
some sid could not be mapped. Otherwise this call is unnecessarily
complicated to call.
Volker
(This used to be commit 1337338522242a430b3c5655ffdff3f701fbfcce)
(no need to include all of smbd files to use some basic sec functions)
also minor compile fixes
couldn't compile to test these due to some kerberos problems wirh 3.0,
but on HEAD they're working well, so I suppose it's ok to commit
(This used to be commit c78f2d0bd15ecd2ba643bb141cc35a3405787aa1)
