IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
printing/printing.c: Cast tdb_delete to (tdb_traverse_func) to stop warning.
tmpfile gives mirror warning.
smbd/groupname.c: Remember to file_lines_free() on exit.
tdb/tdb.h: Add tdb_traverse_func typedef.
Jeremy
(This used to be commit 204ca1195c86499bd9beb273ce573db7a56ccead)
to support some of this I added the following functions in util_file.c
file_lines_pload : load lines from a pipe
file_pload : load a pipe into memory
(This used to be commit a09470817c5b21dba42f9ef4ce5e8b768a254c0b)
this also fixes a few security holes in that code. JF - you need to be
careful about open files for writing! symlinks can trap you.
note that I always unlink() the file first, then open with
O_EXCL. That is a cheap trick to avoid the symlink problems.
(This used to be commit ad56e3d7915100a83b33ad36e627e13325197942)
so swat can get it without linking to the backend code
------------
The following series of commits are for the new tdb based printing
backend. This completely replaces our old printing backend.
Major changes include:
- all print ops are now done in printing/*.c rather than scattered all
over the place
- system job ids are decoupled from SMB job ids
- the lpq parsers don't need to be nearly so smart, they only need to
parse the filename, the status and system job id
- we can store lots more info about a job, including the full job name
- the queue cache control is much better
I also added a new utility routine file_lines_load() that loads a text
file and parses it into lines. This is used in out lpq parsing and I
also want to use it to replace all of our fgets() based code in other
places.
(This used to be commit a902caf8d78ae4cb11ea3776d10273cb37d5fcd0)
it in print_open_file()
that removes a lot of special cases in open.c and makes the print
handling code much easier to understand.
there is still lots to do in printing.c, but this at least gets
printing separated from the mainline code
(This used to be commit e064422af335cd791752a2b54a17a13467ace041)
Went through and fixed up all failure possibilities. If something (malloc,
file open etc.) fails, then this code goes through and cleans up all allocated
resources on exit. This is the equivalent of a C++ destuctor for the allocated
structures. We need code to be written like this to pass purify tests.
Jeremy.
(This used to be commit b260ef7cb1fb2b1e4661cc54eab403eb01fbfc35)
include/byteorder.h: Added alignment macros.
include/nameserv.h: Added defines for msg_type field options - from rfc1002.
lib/time.c: Typo fix.
lib/util_unistr.c: Updates from UNICODE branch.
printing/nt_printing.c: bzero -> memset.
smbd/connection.c: Added check for UT_SYSLEN for utmp code.
Other fixes : Rollback of unapproved commit from Luke.
Please *ask* next time before doing large changes to HEAD.
Jeremy.
(This used to be commit f02999dbf7971b4ea05050d7206205d7737a78b2)
it, to prevent false status return value.
Jeremy, it's a gross hack but you should consider it for 2.0.7 also.
J.F.
(This used to be commit 2b1663ec13d9c481fb535c757744068919201f6a)
undecoded, nothing in MSDN, but now it works :-)
cleanup of error codes.
fixed some dfs declarations function.
J.F.
(This used to be commit 87da4404aba29a2ebd999886e4c06958c96d3e05)
on the glibc source code and are safer than the traditional popen as
they don't use a shell to exec the requested command. Now we have
these functions they can be tightened up (environment etc.) as required
to make a safe popen. It should now be safe to add the environement
variable loading code to loadparm.c
Jeremy.
(This used to be commit b52e92b09d4ca3b66e534f520468dee27065d048)
OpenPrinterEx is now decoding correctly the query
most of the EnumXXX use the new_buffer struct.
check the (un)marshalling return code.
conclusion: still a long way to go. all the client code has to be
rewritten, and I still wonder how to implement correctly the notify stuff.
(This used to be commit 3d6d3863751787b08d40268c83221add1487a5c9)
pdus, and then feeds them over either a "local" function call or a "remote"
function call to an msrpc service. the "remote" msrpc daemon, on the
other side of a unix socket, then calls the same "local" function that
smbd would, if the msrpc service were being run from inside smbd.
this allows a transition from local msrpc services (inside the same smbd
process) to remote (over a unix socket).
removed reference to pipes_struct in msrpc services. all msrpc processing
functions take rpcsrv_struct which is a structure containing state info
for the msrpc functions to decode and create pdus.
created become_vuser() which does everything not related to connection_struct
that become_user() does.
removed, as best i could, connection_struct dependencies from the nt spoolss
printing code.
todo: remove dcinfo from rpcsrv_struct because this stores NETLOGON-specific
info on a per-connection basis, and if the connection dies then so does
the info, and that's a fairly serious problem.
had to put pretty much everything that is in user_struct into parse_creds.c
to feed unix user info over to the msrpc daemons. why? because it's
expensive to do unix password/group database lookups, and it's definitely
expensive to do nt user profile lookups, not to mention pretty difficult
and if you did either of these it would introduce a complication /
unnecessary interdependency. so, send uid/gid/num_groups/gid_t* +
SID+num_rids+domain_group_rids* + unix username + nt username + nt domain
+ user session key etc. this is the MINIMUM info identified so far that's
actually implemented. missing bits include the called and calling
netbios names etc. (basically, anything that can be loaded into
standard_sub() and standard_sub_basic()...)
(This used to be commit aa3c659a8dba0437c17c60055a6ed30fdfecdb6d)
don't coredump when adding forms,
and a small non obvious memory leak in the rpc buffers
J.F.
(This used to be commit bee11f8889378b9f1cc6e2818fd0f8dd7ddcf10d)
Also added addform/setform rpc api calls. Now I can add/change forms from
the server property dialog box.
Jean Francois
(This used to be commit 8d73f83b6c112327a51c0df2e96a1866deb13c3a)
Tidied up some of the mess (no other word for it). Still doesn't
compile cleanly. There are calls with incorrect parameters that
don't seem to be doing the right thing.
This code still needs surgery :-(.
Jeremy.
(This used to be commit 18ff93a9abbf68ee8c59c0af3e57c63e4a015dac)
include/smb.h:
param/loadparm.c: Made GUEST_SESSSETUP run time selectable. Horror of horrors :-).
printing/printing.c: Added J.F.'s latest fix.
rpc_parse/parse_misc.c:
parse_reg.c:
rpcclient/cmd_reg.c:
rpcclient/display.c: SGI compiler signed/unsigned issues.
smbd/reply.c: Made GUEST_SESSSETUP run time selectable. Horror of horrors :-).
utils/testparm.c: Added extra test.
Jeremy.
(This used to be commit 9668a5ef50be2e6b575f9989e87ee2ff8da5ac1d)
client/client.c:
client/clitar.c:
include/client.h:
smbwrapper/smbw_dir.c:
smbwrapper/smbw_stat.c:
smbwrapper/smbw.c:
lib/util.c: Converted all use of 'mode' to uint16.
smbd/quotas.c: Fixed stupid comment bug I put in there :-(.
printing/printing.c: Fix from J.F. to new code.
Jeremy.
(This used to be commit bacd3e9d2036a804e73644a28fc498f229c8446c)
Added quotas patch for autoconf from Dejan Ilic <svedja@lysator.liu.se>.
printing/printing.c: Filenames with spaces patch from Allan Bjorklund <allan@umich.edu>
utils/nmblookup.c: Fix usage() function.
smbd/reply.c: Split out the security=server and security=domain checks into
check_server_security() and check_domain_security() to aid the
writing of the 'hack' appliance mode invented by John Schimmel.
Jeremy.
(This used to be commit f09ab9b52251087a58af92ec753537ca34a970fc)
dummy.in files are no longer needed, and new directories will be taken
care of automatically, at configure (or config.status --recheck) time
(This used to be commit 237a8e5fe62d757c04b8207cbbee4df1470cfe4e)
to check for stat64 and friends, and then changes much of Samba
to use the data type SMB_OFF_T for file size information.
stat/fstat/lstat/lseek/ftruncate have now become sys_stat etc. to hide
the 64 bit calls if needed.
Note that this still does not expose 64 bit functionality to the
client, as the changes to the reply_xxx smb's are not yet done.
This code change should make these changes possible.
Still to do before full 64 bit-ness to the client:
fcntl lock code.
statfs code
widening of dev_t and ino_t (now possible due to SMB_DEV_T and SMB_OFF_T
types being in place).
Let me know if wierd things happen after this check-in and I'll
fix them :-).
Jeremy.
(This used to be commit 14500936c321d15995c963766aac67bf1f4e3824)
