IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is used to set several variables so it might as well be cd-proof.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There is no sane way of keeping stdin open when using the shell to
background ctdbd in local_daemons.sh. Instead, have ctdbd fork when
not interactive and when test mode is enabled. become_daemon() can't
be used for this: if it forks then it also closes stdin.
For the interactive case, become_daemon() wasn't doing anything
special, so do nothing instead.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
A subsequent file descriptor allocation may return 0 and unexpected
things may then happen.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Otherwise, if the test is run via ssh it will "unexpectedly" find
itself at the other end of a pipe.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This doesn't work when stdin is not a tty.
This reverts commit ea754bfdec.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Jan 30 13:53:22 UTC 2020 on sn-devel-184
POSIX says:
If job control is disabled (see set, -m), the standard input for an
asynchronous list, before any explicit redirections are performed,
shall be considered to be assigned to a file that has the same
properties as /dev/null. This shall not happen if job control is
enabled. In all cases, explicit redirection of standard input shall
override this activity.
ctdbd is backgrounded at startup, so the above causes stdin to be
redirected from /dev/null. Enable job control to work around this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Tue Jan 28 11:24:35 UTC 2020 on sn-devel-184
This makes it more like the way it works with a cluster filesystem.
It also allows the subdirectory to be manipulated in tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
See the comments added to the tests.
It may be possible to rewrite these so they do something sane for
IPv6... some other time.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14227
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Jan 3 00:00:55 UTC 2020 on sn-devel-184
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Thu Nov 14 12:03:46 UTC 2019 on sn-devel-184
If any of the option parsing or command parsing fails, generate usage
message.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This can fail as follows:
--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--
Running test ./tests/UNIT/tool/ctdb.process-exists.003.sh (02:26:30)
--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--
ctdb.process-exists.003 - ctdbd process with multiple connections on node 0
Setting up fake ctdbd
<10||0|
OK
<10|PID 26107 exists
|0|
OK
==================================================
Running "ctdb -d NOTICE process-exists 26107 0x1234567812345678"
PASSED
==================================================
Running "ctdb -d NOTICE process-exists 26107 0xaebbccdd12345678"
Registered SRVID 0xaebbccdd12345678
--------------------------------------------------
Output (Exit status: 1):
--------------------------------------------------
PID 26107 with SRVID 0xaebbccdd12345678 does not exist
--------------------------------------------------
Required output (Exit status: 0):
--------------------------------------------------
PID 26107 with SRVID 0xaebbccdd12345678 exists
FAILED
connection to daemon closed, exiting
==========================================================================
TEST FAILED: ./tests/UNIT/tool/ctdb.process-exists.003.sh (status 1) (duration: 0s)
==========================================================================
This happens when dummy_client has not registered the SRVID (for its
10th connection) before the 2nd simple_test.
Change the initial wait to ensure that the SRVID is registered.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Nov 6 02:46:24 UTC 2019 on sn-devel-184
Improve quoting and indentation. Print a clear error if the cluster
goes back into recovery and doesn't come back out.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Retrying like this hides bugs. The cluster should come up first time,
every time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is the only place where setting an environment variable by hand
is recommended, so remove the anomaly.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Tue Oct 22 21:02:11 UTC 2019 on sn-devel-184
Now they are clearly all part of CTDB.
TEST_SOCKET_WRAPPER_SO_PATH gets too long in
integration_local_daemons.bash, so change it to
CTDB_TEST_SWRAP_SO_PATH instead of just prefixing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Implement this for local daemons integration tests, dumping last 100
lines of logs. This makes it possible to debug some failures in
automated tests where the logs are unavailable for analysis.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
When run from integration tests $CTDB already includes $VALGRIND, if
set. So only add $VALGRIND if $CTDB is not set.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There is no good reason why the code needs to be this way. The
intervening code was removed years ago leaving a more complex version
of something very simple.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
That's all they do now.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Oct 4 10:58:10 UTC 2019 on sn-devel-184
It makes sense to do this in one place in case other headers/footers
are added.
Reindent ctdb_test_begin() while touching this function.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It makes sense to do this in one place in case other headers/footers
are added.
Simplify ctdb_test_end() accordingly, reindenting because nearly all
lines are modified.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This allows more variables to be set in this function because they are
no longer in a sub-shell.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Only the test file name is ever passed.
Reindent while touching many existing lines.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These are not used outside this script so they do not need to be
environment variables.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* ctdb_onnode()
* testprog_onnode()
* function_onnode()
These encapsulate familiar patterns found when running
try_command_on_node(). The new function names are more concise and
encourage more readable tests. Test writers can do less thinking
about the subtleties of running different types of commands on nodes.
For example, these functions ensure that $CTDB and $VALGRIND are used
in the correct contexts.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There is no point folding this down to 1. Tests should be able to see
the original value, if required.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The main change is to source cluster.bash instead of integration.bash.
While touching the preamble, the following additional changes are also
made:
* Drop test_info() definition and replace it with a comment
The use of test_info() is pointless.
* Drop call to ctdb_test_check_real_cluster()
cluster.bash now does this.
* Drop call to cluster_is_healthy()
This is a holdover from when the previous test would restart daemons
to get things ready for a test. There was also a bug where going
into recovery during the restart would sometimes cause the cluster
to become unhealthy. If we really need something like this then we
can add it to ctdb_test_init().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This centralises this logic. Use it in a subset of tests - there are
other cases but these will be cleaned up soon.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This allows standard exit codes for failed and skipped tests, and test
errors.
Skipped tests currently just succeed and a test error is the same as a
failure. These can be easily changed later when run_tests.sh is ready
to handle them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use of this tunable was dropped over 5 years ago in commit
16837bc309.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Oct 4 07:07:21 UTC 2019 on sn-devel-184
Bring this up to date. Drop descriptions of command-line options
because these tend to bit-rot - refer to "run_tests.sh -h" instead.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Thu Sep 26 06:01:33 UTC 2019 on sn-devel-184
Split some tests out into database/ and failover/ subdirectories.
Rename the remaining tests in simple/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Do the same with the alternative code for real clusters.
Both of these can now be used by other test suites.
Fix some basic shellcheck warnings (e.g. avoid word-splitting by
quoting) while moving code and add the new files to the shellcheck
test.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
run_tests() already has a loop, so use it.
This means collections of test suites can be handled - but explicitly
check valid collection names to avoid running junk.
Add special cases for simple and complex. These will be removed when
those test suites are moved to collections. This seems to be the
smallest amount of churn to support bisection.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The additional function makes the logic harder to understand.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The UNIT subdirectory directory will contain all unit tests. Use an
uppercase name to avoid conflicts with source code subdirectories.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is now local to run_tests.sh.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Sep 24 03:46:59 UTC 2019 on sn-devel-184
CTDB_TEST_TMP_DIR repaces SIMPLE_TESTS_VAR_DIR. local.bash no longer
needs to ensure that TEST_VAR_DIR is set, since it longer uses this
variable. Drop the comment because state has not been maintained
between tests for some time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is a subdirectory of TEST_VAR_DIR that is unique to the current
test suite. It is recreated for each individual test.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
With some upcoming changes, the setting of CTDB_BASE becomes
problematic because it will be included unconditionally whereas it is
currently being conveniently and almost accidentally not include in
some contexts.
So, instead of trying to coerce onnode into behaving as desired, have
the local daemons tests use local_daemons.sh onnode directly.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
On my laptop this is "memcheck-amd64-linux instead of just "memcheck".
Alternatively, this part of the test could simply be skipped if
$VALGRIND is set.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This covers the following:
SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
POSIX agrees that -a and -o should not be used:
https://pubs.opengroup.org/onlinepubs/9699919799/utilities/test.html
Fixing these doesn't cause much churn.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This means less random files dropped in /tmp or similar.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The usage message says it is dodgy and some test suites may not
support it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There is no point inventing a whole new set of options here.
Continue to locally implement the --no-event-scripts option. This
must be first, though in practice only one option is ever passed to
setup_ctdb() from ctdb_test_init().
Simply pass all other options through to "local_daemons.sh setup".
This has the side effect of causing failure when an invalid option is
passed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
SC2086 Double quote to prevent globbing and word splitting
This one doesn't need the double quotes if it is contained within the
preceding variable expansion.
SC2181 Check exit code directly with e.g. 'if mycmd;', not indirectly with $?
SC2004 $/${} is unnecessary on arithmetic variables
These are straightforward.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is only needed for setup_ctdb_base() so only set it when calling
this function.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The nested, arbitrary use of onnode can cause messages from ssh on
stderr to appear in the node list:
Getting list of nodes...
Output of "onnode -pq all ctdb pnn | grep '^[0-9][0-9]*$'":
Warning: Permanently added '10.0.0.72' (RSA) to the list of known hosts.^M
Warning: Permanently added '10.0.0.75' (RSA) to the list of known hosts.^M
Warning: Permanently added '10.0.0.73' (RSA) to the list of known hosts.^M
Warning: Permanently added '10.0.0.74' (RSA) to the list of known hosts.^M
1
0
3
2
Create/wipe test database rec_test.tdb
Failed to execute "Permanently added '10.0.0.72' (RSA) to the list of known hosts.^M ctdb attach rec_test.tdb" on node(s) "Warning:"
Invalid <nodespec>
Avoid that by using an existing function that does not nest ssh uses.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Direct leak of 256 byte(s) in 8 object(s) allocated from:
#0 0x7f11b90d9c08 in __interceptor_malloc (/lib64/libasan.so.5+0xefc08)
#1 0x7f11b8f395df in tdb_alloc_read ../../../lib/tdb/common/io.c:696
#2 0x7f11b8f290ee in _tdb_fetch ../../../lib/tdb/common/tdb.c:274
#3 0x7f11b8f29379 in tdb_fetch ../../../lib/tdb/common/tdb.c:283
#4 0x473ecc in ltdb_fetch ../../tests/src/fake_ctdbd.c:904
#5 0x478b40 in ltdb_transaction_update ../../tests/src/fake_ctdbd.c:993
#6 0x41fef2 in ctdb_rec_buffer_traverse ../../protocol/protocol_types.c:1656
#7 0x48108b in ltdb_transaction ../../tests/src/fake_ctdbd.c:1026
#8 0x48108b in control_trans3_commit ../../tests/src/fake_ctdbd.c:2878
#9 0x48108b in client_process_control ../../tests/src/fake_ctdbd.c:4147
#10 0x48108b in client_process_packet ../../tests/src/fake_ctdbd.c:3839
#11 0x4847f5 in client_read_handler ../../tests/src/fake_ctdbd.c:3806
#12 0x44f620 in comm_read_done ../../common/comm.c:208
#13 0x7f11b8f94fe8 in _tevent_req_notify_callback ../../../lib/tevent/tevent_req.c:141
#14 0x7f11b8f951fd in tevent_req_finish ../../../lib/tevent/tevent_req.c:193
#15 0x7f11b8f95265 in _tevent_req_done ../../../lib/tevent/tevent_req.c:199
#16 0x44e876 in pkt_read_handler ../../common/pkt_read.c:133
#17 0x44f315 in comm_fd_handler ../../common/comm.c:412
#18 0x7f11b8f92896 in tevent_common_invoke_fd_handler ../../../lib/tevent/tevent_fd.c:138
#19 0x7f11b8fa6937 in epoll_event_loop ../../../lib/tevent/tevent_epoll.c:736
#20 0x7f11b8fa6937 in epoll_event_loop_once ../../../lib/tevent/tevent_epoll.c:937
#21 0x7f11b8f9f53e in std_event_loop_once ../../../lib/tevent/tevent_standard.c:110
#22 0x7f11b8f90f34 in _tevent_loop_once ../../../lib/tevent/tevent.c:772
#23 0x7f11b8f955f1 in tevent_req_poll ../../../lib/tevent/tevent_req.c:300
#24 0x485a04 in start_server ../../tests/src/fake_ctdbd.c:4450
#25 0x485a04 in main ../../tests/src/fake_ctdbd.c:4544
#26 0x7f11b8c60412 in __libc_start_main (/lib64/libc.so.6+0x24412)
Signed-off-by: Swen Schillig <swen@linux.ibm.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Mon Aug 26 10:19:30 UTC 2019 on sn-devel-184
This test has been flapping because sometimes the record is not
vacuumed within the expected time period, perhaps even because the
check for the record can interfere with vacuuming. However, instead
of waiting for vacuuming the record can be cleared by doing a
recovery. This should be much more reliable.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14085
RN: Fix flapping CTDB tests
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Wed Aug 21 13:06:57 UTC 2019 on sn-devel-184
The following test sometimes fails:
==================================================
Running "cluster_mutex_test lock-unlock-lock-unlock ./tests/var/cluster_mutex.lockfile"
--------------------------------------------------
Output (Exit status: 134):
--------------------------------------------------
LOCK
UNLOCK
CONTENTION
NOLOCK
cluster_mutex_test: ../../tests/src/cluster_mutex_test.c:307: test_lock_unlock_lock_unlock: Assertion `dl2->mh != NULL' failed.
--------------------------------------------------
Required output (Exit status: 0):
--------------------------------------------------
LOCK
UNLOCK
LOCK
UNLOCK
FAILED
==========================================================================
TEST FAILED: tests/cunit/cluster_mutex_001.sh (status 1) (duration: 0s)
==========================================================================
This is due to a race in the test. For the first UNLOCK a signal is
sent to the cluster mutex handler but the test tries to retake the
lock before that process is scheduled and the signal is processed.
Therefore, the fcntl() lock is still held and contention is seen.
After unlocking, tests need to wait until the child has gone, so build
this into ctdb_kill(). This is one of the only places where the PID
is accessible.
Outside of testing, on a real system, nothing will never try
to (re)take the lock so quickly.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14085
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Check the record count more often, from multiple nodes. Add a case
with multiple records.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14085
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use the VNN map from the node running node_has_status().
This means that
wait_until_node_has_status 1 notlmaster 10 0
will run "ctdb status" on node 0 and check (for up to 10 seconds) if
node 1 is in the VNN map.
If the LMASTER capability has been dropped on node 1 then the above
will wait for the VNN map to be updated on node 0. This will happen
as part of the recovery that is triggered by the change of LMASTER
capability. The next command will then only be able to attach to
$TESTDB after the recovery is complete thus guaranteeing a sane state
for the test to continue.
This stops simple/79_volatile_db_traverse.sh from going into recovery
during the traverse or at some other inconvenient time.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14085
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
All the other cases involve matching bits.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14085
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Re-indent and drop non-POSIX left-parenthesis from case labels.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14085
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Should be used when public IP addresses are not assigned.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If there is a failure it will always be the last test run. Don't
obscure this by following it with a summary.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These files now pass, so we might as well keep them in good shape.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This can be used to find ctdb_run_tests and ctdb_local_daemons.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Given other improvements, this is now needlessly complex.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
SC2045 Iterating over ls output is fragile. Use globs.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
SC2034 summary appears unused. Verify use (or export if used externally)
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
SC2155 Declare and assign separately to avoid masking return values
The wscript changes require an identical change in local_daemons.sh.
While touching the lines in wscript, escape the backslashes to make
them literal backslashes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
SC2164 Use 'cd ... || exit' or 'cd ... || return' in case cd fails
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
SC2086 Double quote to prevent globbing and word splitting
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These tests currently do not do what is expected. They test the
default case.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the lock file is inaccessible or the inode number changes then the
lock is lost, so exit. This allows the recovery daemon to trigger an
election. The ensuing recovery will re-take the lock.
By default the lock file is checked every 60 seconds. A lot can
happen in 60 seconds but being more aggressive and accessing the lock
too often could result in a performance issue for the cluster
filesystem.
An new optional 2nd argument is added, which is the lock file re-check
time in seconds.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Put the checking for the process being immediately re-parented into
the computation too. This will be very rare and doing it
consistently makes testing saner.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This makes it consistent with print-socket.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Jul 5 06:19:11 UTC 2019 on sn-devel-184
Static analysis finds that earlier in the call path, ctdb_string_len()
checks for NULL, so complains that a NULL value can be passed to
strlen() here. Avoid this by adding an assert().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The dummy reader should never be called, so contains an assert on the
buffer length that should always trigger. Just abort() instead.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These are all cases comparing a number of bytes written (int or
ssize_t) with a size_t, so casting to size_t is appropriate.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Change declarations of variable and parameters, usually loop variables
and limits, from int to unsigned int, size_t or uint32_t.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This improves readability. Also, the asserts involving this
expression get more complicated in the next commit, so this will keep
those asserts within a single line.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There is a chance that restoring IP addresses to the test node will
result in different IP addresses being assigned to that node.
Removing a single IP address may then fail (or be a no-op) if it is
done after the restore.
So, swap the single IP address removal to happen first, then restore,
then remove all IP addresses.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ctdb reloadips will fail if it can't disable takover runs. The most
likely reason for this is that there is already a takeover run in
progress. We can't predict when this will happen, so retry if this
occurs.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Otherwise, when looping tests for a long time, nodes are unable to
connect to each other.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon May 13 08:42:44 UTC 2019 on sn-devel-184
error: ‘%04d’ directive writing between 4 and 11 bytes into a region of
size 5 [-Werror=format-overflow=]
sprintf(key, "key%04d", i);
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Since commit 0e9ead8f28 daemons have
been shut down after each test, so this option no longer has anything
to do with killing daemons.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Sometimes the detach test fails:
Check detaching single test database detach_test1.tdb
BAD: database detach_test1.tdb is still attached
Number of databases:4
dbid:0x5ae995ee name:detach_test4.tdb path:tests/var/simple/node.0/db/volatile/detach_test4.tdb.0
dbid:0xd84cc13c name:detach_test3.tdb path:tests/var/simple/node.0/db/volatile/detach_test3.tdb.0
dbid:0x8e8e8cef name:detach_test2.tdb path:tests/var/simple/node.0/db/volatile/detach_test2.tdb.0
dbid:0xc62491f4 name:detach_test1.tdb path:tests/var/simple/node.0/db/volatile/detach_test1.tdb.0
Number of databases:3
dbid:0x5ae995ee name:detach_test4.tdb path:tests/var/simple/node.1/db/volatile/detach_test4.tdb.1
dbid:0xd84cc13c name:detach_test3.tdb path:tests/var/simple/node.1/db/volatile/detach_test3.tdb.1
dbid:0x8e8e8cef name:detach_test2.tdb path:tests/var/simple/node.1/db/volatile/detach_test2.tdb.1
Number of databases:4
dbid:0x5ae995ee name:detach_test4.tdb path:tests/var/simple/node.2/db/volatile/detach_test4.tdb.2
dbid:0xd84cc13c name:detach_test3.tdb path:tests/var/simple/node.2/db/volatile/detach_test3.tdb.2
dbid:0x8e8e8cef name:detach_test2.tdb path:tests/var/simple/node.2/db/volatile/detach_test2.tdb.2
dbid:0xc62491f4 name:detach_test1.tdb path:tests/var/simple/node.2/db/volatile/detach_test1.tdb.2
*** TEST COMPLETED (RC=1) AT 2019-04-27 03:35:40, CLEANING UP...
When issued from a client, the detach control re-broadcasts itself
asynchronously to all nodes and then returns success. The controls to
some nodes to do the actual detach may still be in flight when success
is returned to the client. Therefore, the test should wait for a few
seconds to allow the asynchronous controls to complete.
The same is true for the attach control, so workaround the problem in
the attach test too.
An alternative is to make the attach and detach controls synchronous
by avoiding the broadcast and waiting for the results of the
individual controls sent to the nodes. However, a simple
implementation would involve adding new nested event loops.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This sometimes fails, apparently due to a cat process in onnode
getting EAGAIN. The conclusion is that tests that process large
amounts of output should not depend on a sub-shell delivering that
output into a shell variable.
Change try_command_on_node() to leave all of the output in file
$outfile and just put the first 1KB into $out. $outfile is removed
after each test completes.
Change the implementation of sanity_check_output() to use $outfile
instead of $out.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
All callers are currently passed $out. Global variable $out is used
in many other places so use it here to simplify the interface and make
future changes simpler.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB's system memory monitoring in 05.system.script monitors both main
memory and swap. The swap monitoring was originally based on
the (possibly incorrect, see below) idea that swap space stacks on top
of main memory, so that when a system starts filling swap space then
this is supposed to be a good sign that the system is running out of
memory. Additionally, performance on a Linux system tends to be
destroyed by the I/O associated with a lot of swapping to spinning
disks.
However, some platforms default to creating only 4GB of swap space
even when there is 128GB of main memory. With such a small swap to
main memory ratio, memory pressure can force swap to be nearly full
even when a significant amount of main memory is still available and
the system is performing well. This suggests that checking swap
utilisation might be less than useful in many circumstances.
So, remove the separate swap space checking and change the memory
check to cover the total of main memory and swap space.
Test function set_mem_usage() still takes an argument for each of main
memory and swap space utilisation. For simplicity, the same number is
now passed twice to make the intended results comprehensible. This
could be changed later.
A couple of tests are cleaned up to no longer use hard-coded
/proc/meminfo and ps output.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If a data packet arrives which exceeds the queue's current buffer size,
the buffer needs to be increased to hold the full packet. Once the packet
is processed the buffer size should be decreased to its standard size again.
This test case verifies this process.
Signed-off-by: Swen Schillig <swen@linux.ibm.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Christof Schmitt <cs@samba.org>
Autobuild-User(master): Christof Schmitt <cs@samba.org>
Autobuild-Date(master): Wed Apr 10 00:17:37 UTC 2019 on sn-devel-144
Some test scenarios require access to the created queue.
Prepare the test_setup function to provide it as additional parameter.
Signed-off-by: Swen Schillig <swen@linux.ibm.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Christof Schmitt <cs@samba.org>
The tests are written around the default of sysvinit-redhat. Add
support for systemd-redhat.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13860
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
This can be used to test the version checking logic. Cache the
version to avoid re-checking the environment variable each time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
This file is included by local_daemons.sh, which is not a bash script
and wait_until() uses the "local" keyword. Prefixing variable names
with '_' to indicate that they are local changes a lot of lines in
this function. So, fix indentation, potential quoting problems and
other ShellCheck hits while touching this function.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
This isn't used anywhere that requires it to be exported, but the lack
of consistency will cause problems and confusion at some later stage.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
ctdb_sock_addr values are hashed in some contexts. This means that
all of the memory used for the ctdb_sock_addr should be consistent
regardless of how parsing is done. The first 2 cases are just sanity
checks but the 3rd case involving an IPv4-mapped IPv6 address is the
real target of this test addition.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13839
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
CTDB_CLUSTER_MUTEX_HELPER can't be depended on because it is only set
when the tests are not installed and setting it unconditionally for
this particular use would be wrong.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13800
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
Under the covers, a command is always used. However, there is no way
of testing of the code path where a command is explicitly configured.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13800
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13791
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Feb 22 03:51:37 CET 2019 on sn-devel-144
Checking that the database contains 0 records cause a traverse. This
may take a lock and cause vacuuming to fail (or be deferred for a
particular record/chain). Minimise the chance of this happening by
only checking for 0 records every 10 seconds.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This can result in Unix domain socket names that are too long.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Dec 18 05:31:00 CET 2018 on sn-devel-144
If CTDB_BASE is relative then the symbolic link target will be
incorrect.
Don't force CTDB_BASE to be absolute because this can result in Unix
domain socket names that are too long.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Event scripts (well, statd_callout) can change directory, causing
stubs to be unable to locate EVENTSCRIPTS_TESTS_VAR_DIR if it is
relative.
Don't force TEST_VAR_DIR to be absolute because this can result in
Unix domain socket names that are too long.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If TEST_VAR_DIR is relative then symbolic link targets will be
incorrect.
Don't force TEST_VAR_DIR to be absolute because this can result in
Unix domain socket names that are too long.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Ideally this would just involve using "test -r". However, operating
system security features may mean that kernel stacks are not readable
even though they appear to be.
Instead, try reading that stack of a process on the test node. If
that succeeds then so should reading the stack of the "stuck" sleep
process in the test.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13684
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Tim Beale <timbeale@catalyst.net.nz>
Autobuild-User(master): Tim Beale <timbeale@samba.org>
Autobuild-Date(master): Thu Nov 15 08:15:32 CET 2018 on sn-devel-144
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Nov 8 11:03:11 CET 2018 on sn-devel-144
Explicitly background ctdbd instead.
This has the advantage of leaving stdin open. ctdbd can then be
enhanced to exit when stdin closes, allowing better cleanup in a test
environment.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Nov 6 10:30:14 CET 2018 on sn-devel-144
These aren't used by simple tests but they will be useful for
integrating ctdbd local daemons into other test suites and for
debugging.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The etc-ctdb/ subdirectory containing the event script moves into the
top-level tests/ directory because the subdirectory is really now
owned by local_daemons.sh instead of simple/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This provides a separate script for handling local daemons. It can be
used for testing outside of the CTDB simple test suite. It is
installed as ctdb_local_daemons.
The logic is copied from ctdb/tests/simple/scripts/local_daemons.bash.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Always create an empty event script directory. If $TEST_SUBDIR is
unset then don't use it to look for etc-ctdb/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Don't calculate this locally as _tools_dir. Add it to PATH
unconditionally - this may result in duplicate entries in PATH but the
resulting code is simpler.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Don't calculate this locally as _test_bin_dir. Just calculate
top_dir, source script_install_paths.sh and use
$CTDB_SCRIPT_TESTS_BINDIR.
Don't bother sanity checking if TEST_BIN_DIR is set. It will go away
soon.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ctdb_test_init() now passes any arguments to setup_ctdb().
Update tests that have custom local daemon configuration to call
ctdb_test_init() directly. Remove the redundant, initial call to
ctdb_test_init() to avoid starting the cluster an extra time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This no longer does anything. Integration test cases now start and
shut down the cluster.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The remainder of the scheduled restart logic is about to be removed,
so produce debugging information any time the cluster is not healthy.
While here, reindent and drop the else since there is already an early
return before it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Integration test cases now start and shut down the cluster.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Interrupting a test run currently moves on to the next test. It
should exit.
Follow the practice of exiting with 128 + signal number.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Running testsuite-specific code here isn't a good option.
Daemons are now shut down in ctdb_test_exit(), even when testing is
interrupted.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This makes tests self-contained. They can also now be individually
looped, if necessary.
Most tests (all but 1 complex, more than 50% of simple) restart the
daemons anyway, so this simplification is worth it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Exit on first test failure instead of setting a variable. The bizarre
logic in ctdb_test_exit() makes this worth dropping.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These 3 tests duplicate various checks and can easily be handled as a
single test.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The "continue" and "enable" tests are just extensions of the "stop"
and "disable" tests, so drop the latter 2.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This strengthens those tests to ensure that released IPs aren't
replaced with others.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If there aren't enough addresses in the list then the shift will
silently fail and the printed address will be the unshifted value of
$1, which is incorrect/unexpected. So, sanity check the node number.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The local daemons ssh stub doesn't need to do this because the ctdbd
and the ctdb tool now only need CTDB_TEST_MODE and CTDB_BASE for local
daemon tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Just leak the memory allocated by path_socket(). This is only used in
short-lived test programs, so it isn't worth the hassle of plumbing a
talloc context through several layers to get here.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This needs to be done before any of the code changes are made,
including updating the ctdb tool.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
However, don't use ctdb-path itself because some tests use nested
instances of onnode. The outermost instance would set CTDB_SOCKET and
any inner instance would pick up that value, regardless of CTDB_BASE.
This is a temporary measure to avoid breaking testing while use of the
path functions is added to ctdbd and the ctdb tool. When this is
complete these variables can be removed altogether because the code
will just depend on CTDB_TEST_MODE and CTDB_BASE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Record counts are sometimes incomplete for large databases when
relevant tests are run on a real cluster.
This probably has something to do with ssh, pipes and buffering, so
move the filtering and counting to the remote end. This means that
only the count comes across the pipe, instead of all the record data.
Instead of explicitly excluding the key for persistent database
sequence numbers, just exclude any key starting with '_'. Such keys
are not used in tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Oct 8 05:36:11 CEST 2018 on sn-devel-144
This test sometimes fails, probably because the test is flakey.
Either the records aren't being added correctly or the counting of
records loses records. Try to debug both possibilities.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
A transaction_loop client can exit with a transaction active when its
time limit expires. This causes a recovery and causes problems with
the test cleanup, which detects unwanted recoveries and fails.
Set a flag when the time limit expires and exit cleanly before the
next transaction is started.
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Not sure this is needed but this makes it behave the same as ssh.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The goal is to allow more local daemons by expanding the address range
rather than generating invalid addresses.
For IPv6, use a separate address space instead of an offset for the
2nd address.
For IPv4, use the last 2 octets with addresses starting at
192.168.100.1 and 192.168.200.1. Avoid addresses with 0 and 255 in
the last octet by using a maximum of 100 addresses per "subnet"
starting at .1.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The goal is to allow more local daemons by expanding the address range
rather than generating invalid addresses.
For IPv6, use all 4 trailing hex digits.
For IPv4, use the last 2 octets. Although 127.0.0.0 is a /8 network,
avoid unexpected issues due to 0 and 255 in the last octet. Use a
maximum of 100 addresses per "subnet" starting at .1. Keep the first
group of addresses in 127.0.0.0/24 to continue to allow a reasonable
number of nodes to be tested with socket-wrapper.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Don't loop, just use onnode all.
For shutting down, use onnode -p all. This results in a significant
time saving for stopping many deamons because "ctdb shutdown" is now
synchronous.
onnode -p all can be used to start daemons directly because they
daemonize. However, this does not work under valgrind because the
valgrind process does not exit, so onnode will wait forever for it.
In this case, use onnode without the -p option.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Run the daemon directly and shut it down using ctdb shutdown.
The wrapper waits for ctdbd to reach >=FIRST_RECOVERY runstate within
a timeout period and shuts ctdbd down if that doesn't happen. This is
only really used to ensure that ctdbd doesn't exit early after an
apparently successful start. There are no known cases where ctdbd
will continue running but fail to reach >=FIRST_RECOVERY runstate.
When ctdbd is started in tests, the test code will wait until ctdbd is
in a healthy state on all nodes before proceeding, so there is
effectively no change in behaviour.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This directory is no longer used. Lack of removal doesn't seem to
cause a problem.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are too many functions to start/stop daemons. Simplify this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is clearer if the logic is explicit... and...
There are too many functions to start/stop daemons. Simplify this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are too many functions to start/stop daemons. Simplify this.
Inline the functionality into ctdb_start_all() and ctdb_stop_all().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are too many functions to start/stop daemons. Simplify this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are too many functions to start/stop daemons. Simplify this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are too many functions to start/stop daemons. Simplify this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This was used for debugging tests by ensuring that the arguments to
ctdbd were as expected. It no longer outputs anything useful because
ctdbd is now started without arguments.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Ensure that deleted records and vacuumed records are not resurrected
from recently inactive nodes.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13641
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
gcc 4.8.5 complains:
[319/381] Compiling ctdb/tests/src/system_socket_test.c
../tests/src/system_socket_test.c: In function ‘test_tcp’:
../tests/src/system_socket_test.c:196:20: error: ‘rst_out’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
assert((rst != 0) == (rst_out != 0));
^
cc1: all warnings being treated as errors
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Andreas Schneider <asn@samba.org>
CTDB -O3 --picky-developer build is failing. Not sure how this
slipped through.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Thu Sep 6 08:33:59 CEST 2018 on sn-devel-144
This function is used to run a extra command to check a result. This
command is usually a script (often a stub) or an external command, so
no need to trace it with valgrind or whatever else might be specified.
In the worst case the command being run is a shell function, which
valgrind won't be able to find.
There is little use running the event script tests under valgrind.
However, when the whole test suite is being run under valgrind then it
should work.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Sep 3 14:04:00 CEST 2018 on sn-devel-144
The in-tree local daemons tests don't work from a top-level Samba
compile. The simple test suite was the first test suite and things
have generally worked, so it has been slow to adopt general test
infrastructure changes.
Instead of re-calculating script and helper locations, use the paths
from script_install_paths.sh. The bin/ directory is already added to
PATH in common.sh, so don't add it here.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB's test suite doesn't work from a top-level compile. The first
step to fixing this is to correctly locate the bin/ directory.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
At the moment multiple errors will be encountered one at a time, on
each load or validate. Instead, allow all configuration errors to
printed in a single pass.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Only use ENOENT for missing configuration file.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This covers both options that appear before a section and options in
unknown sections.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
