IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This commit allows an optional port number to be specified after the
hostname on the winexe command line. If no port is given, it defaults
to port 445, just like it used before. Although this is probably a
pretty uncommon use-case, it allows port-forwarding the service through
a firewall to an alternate port, which can occassionally be helpful.
$ ./bin/winexe -U karl%password1 //127.0.0.1:5445 cmd.exe
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>
Signed-off-by: Karl Lenz <xorangekiller@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Two small Windows binaries that winexe uses to execute commands on a
remote system, winexesvc32.exe and winexesvc64.exe, are compiled then
translated into a C byte array as hex so that they can be embedded into
the winexe binary. Although the winexesvc binaries were built properly,
the Python method that does the translation to C tried to open them in
text mode, which would have worked in Python 2 before the concept of
bytearrays was introduced, but instead raises an exception in Python 3.
The exception was unfortunately suppressed, so the build didn't stop,
and the winexe binary that was produced was effectively useless because
it didn't contain either winexesvc binary as expected. After winexe
successfully authenticated with a Windows host, it showed the error
message below rather than executing the given command on the remote
system.
$ ./bin/winexe -U karl%password1 -d 2 //192.168.56.3 cmd
winexe_svc_install: dcerpc_svcctl_StartServiceW failed: WERR_BAD_EXE_FORMAT
main: winexe_svc_install failed: NT_STATUS_BAD_INITIAL_PC
This commit fixes that problem by opening the winexesvc binaries in
binary mode rather than text mode when the winexe build script reads
them to translate them to C. Furthermore it adds an additional
sanity check that will cause the winexesvc binary generator commands to
fail if the winexesvc binaries cannot be opened or read correctly to
guarantee that the build does not silently "succeed" if something like
this ever happens again.
Signed-off-by: Karl Lenz <xorangekiller@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This is not called anymore, bump the VFS version number in a separate
commit
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Jun 20 18:34:20 UTC 2019 on sn-devel-184
This is driven by the imminent smb2 unix extensions, we'll want to make use of
it from source3/libsmb.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We'll add parameters in the next commit, make that commit a bit more obvious
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This also removes smb_vfs_ev_glue_[push|pop]_use() as the only caller
got removed.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
SMB_VFS_GETXATTRAT_SEND() gets passed a raw event context and the
default implementation uses that as well a raw threadpool. Impersonation
is done explicitly instead of by the tevent and pthreadpool wrappers.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Noel Power <npower@samba.org>
Autobuild-User(master): Noel Power <npower@samba.org>
Autobuild-Date(master): Fri Dec 14 18:00:40 CET 2018 on sn-devel-144
Signed-off-by: Brian Candler <b.candler@pobox.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Dec 14 04:13:38 CET 2018 on sn-devel-144
Signed-off-by: Brian Candler <b.candler@pobox.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
winexe from https://sourceforge.net/projects/winexe/ is a project
based on Samba libraries from 2012. According to the winexe git
repository the last Samba commit winexe was updated to is 47bbf9886f
from November 6, 2012. As winexe uses unpublished Samba internal
libraries, it broke over time.
This is a port of the winexe functionality to more modern Samba
versions. It still uses internal APIs, but it being part of the tree
means that it is much easier to keep up to date.
The Windows service files were taken literally from the original
winexe from the sourceforge git. Andrzej Hajda chose GPLv3 only and
not GPLv3+. As GPL evolves very slowly, this should not be a practical
problem for quite some time.
To build it under Linux, you need mingw binaries on your build
system. Under Debian stretch, the package names are gcc-mingw-w64 and
friends.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Aug 28 02:03:07 CEST 2018 on sn-devel-144
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Wed Jul 25 20:44:12 CEST 2018 on sn-devel-144
This line was probably copied over from skel_transparent.c, remove it.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
reponse --> response
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Fill it in when available, else return it as zero.
Based on a patch from Puran Chand <pchand@vmware.com>.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
All code in Samba now uses SMB_VFS_PWRITE or SMB_VFS_PWRITE_SEND.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Sat May 5 01:38:07 CEST 2018 on sn-devel-144
All code in Samba now uses SMB_VFS_PREAD or SMB_VFS_PREAD_SEND.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Wed May 2 01:06:28 CEST 2018 on sn-devel-144
Samba-VirusFilter Contributors:
SATOH Fumiyasu @ OSS Technology Corp., Japan
Module creator/maintainer
Luke Dixon luke.dixon@zynstra.com
Samba 4 support
Trever L. Adams
Documentation
Code contributions
Samba-master merge work
With many thanks to the Samba Team.
Signed-off-by: Trever L. Adams <trever.adams@gmail.com>
Signed-off-by: SATOH Fumiyasu <fumiyas@osstech.co.jp>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
These scripts are not that useful anymore, as they rely
on parameters to be defined in loadparm.c
It's confusing to get 'git grep' matches for parameters there...
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Aug 11 14:19:24 CEST 2017 on sn-devel-144
