IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
read/write requests for large reads. up to max_mux requests may be
outstanding. This gives _much_ better throughput and should allow
smbsh to saturate just about any network.
this is an implementation of the "fast SMB" method I described on the
CIFS list a couple of months back.
- enable cli_RNetSharEnum
- fix password handling in sesssetup for NT1 protocol
- handle partial reads and writes in cli_{read,write}
- added cli_getattrE
- modify cli_qpathinfo() to swap byte order for win95 servers
- handle temporary errors from FINDFIRST/FINDNEXT from win95 servers,
when we get a error we sleep for a bit and retry
- return approx unix errno from cli_error(). Need to add a lot more
cases to this.
- added srvsvc client files
clientgen.c :
- replaced cli_error(cli, int *cls, int *err) with
cli_error(cli, uint8 cls, uint32 *err). this version detects
32 bit status messages. the DOS error "MORE_DATA", the
equivalent of the 32 bit *warning* 0x8000 0005
(STATUS_BUFFER_OVERFLOW), was being processed as an error,
terminating the cli_receive_trans() call.
cli_pipe.c :
- replaced calls that had been incorrectly modified from
32 bit warnings (0x8000 0005 - STATUS_BUFFER_OVERFLOW)
to 8 bit DOS errors (0x01 0xEA - MORE_DATA).
the use of the old version of cli_error (DOS only)
instead of the new one (DOS and 32 bit) caused the
dce/rpc client code to fail.
- replaced 2 space indentation with tab indentation in all functions.
cli_srvsvc.c :
cmd_srvsvc.c :
- added these files back in, fixing them up to use jeremy's
modified versions of the dce/rpc client functions.
parse_srv.c :
- added back in some "unused" functions required by dce/rpc
client-side code. it would be helpful if all such "unused"
functions could be added back in.
rpcclient.c :
- added "session", "file", "share", "connection" enumeration
functions back in. these are equivalent to nt's "NetXXXXXEnum"
Win32 (MSDN) functions.
- added "srvinfo" function back in. this is equivalent to
nt's NetServerGetInfo Win32 (MSDN) function.
param/loadparm.c:
smbd/oplock.c: Allow kernel oplocks to be turned off in the smb.conf file.
smbd/server.c: Move init_structs() to after the smb.conf file is loaded - preparation
for making a "max open files" parameter.
Jeremy.
uid_t, gid_t and vuid. Added sys_getgroups() to get
around the int * return problem. Set correct datatypes
for all uid, gid and vuid variables.
Jeremy.
Changes to get Samba to compile cleanly with the IRIX compiler
with the options : -fullwarn -woff 1209,1174 (the -woff options
are to turn off warnings about unused function parameters and
controlling loop expressions being constants).
Split prototype generation as we hit a limit in IRIX nawk.
Removed "." code in smbd/filename.c (yet again :-).
Jeremy.
prompted by the interpret_security() dead code that Jean-Francois
pointed out I added a make target "finddead" that finds potentially
dead (ie. unused) code. It spat out 304 function names ...
I went through these are deleted many of them, making others static
(finddead also reports functions that are used only in the local
file).
in doing this I have almost certainly deleted some useful code. I may
have even prevented compilation with some compile options. I
apologise. I decided it was better to get rid of this code now and add
back the one or two functions that are needed than to keep all this
baggage.
So, if I have done a bit too much "destroying" then let me know. Keep
the swearing to a minimum :)
One bit I didn't do is the ubibt code. Chris, can you look at that?
Heaps of unused functions there. Can they be made static?
clitar.c: Added 'Samba style' comments before string_create_s().
loadparm.c: Fixed missing comma in SSL code.
util.c: Removed string_create_s(). Currently it's only called from
clitar.c and having it here as well as a static in clitar
causes the compile to break (Richard, please decide where
you want this function).
lib/rpc/parse/parse_net.c: Fix from <anders.blomdell@control.lth.se>
to stop coredump on missing parameter.
Jeremy.
This patch may not yet compile with -DUSE_SSL enabled, further
Makefile changes may be needed. But it was important to get
this code in place before I go off to USENIX.
Jeremy.
It removed all ocurrences of the following functions :
sprintf
strcpy
strcat
The replacements are slprintf, safe_strcpy and safe_strcat.
It should not be possible to use code in Samba that uses
sprintf, strcpy or strcat, only the safe_equivalents.
Once Andrew has fixed the slprintf implementation then
this code will be moved back to the 1.9.18 code stream.
Jeremy.
everywhere. I've implemented slprintf() as a bounds checked sprintf()
using mprotect() and a non-writeable page.
This should prevent any sprintf based security holes.
clientgen.c: Added nt_error as an entry in the struct client_state.
password.c: Open the netlogon pipe.
smb.h: Added nt_error as an entry in the struct client_state.
lib/rpc/parse/parse_net.c: Added comments on net logon.
lib/rpc/server/srv_netlog.c: Added comments on net logon.
Jeremy.
password.c: Changed global cli -> pw_cli, removed strtok (bad strtok, bad :-)
use in security=server, started to extend security=domain code.
smbpasswd.c: Removed rap error code functions.
Jeremy.
clientgen.c: Changed to fill change password buffer with random stuff.
password.c: Changed to get challenge from genrand.c
server.c: Added #ifdef around O_SYNC.
version.h: Changed to 1.9.19prealpha.
genrand.c:
New code to generate (hopefully) good random numbers for
use in crypto challenges/session keys etc.
PLEASE REVIEW THIS CODE AND SUGGEST IMPROVEMENTS !!!!!!
Jeremy.
regularized parameter syntax:
setup, setup_count, max_setup_count,
params, params_count, max_params_count,
data, data_count, max_data_count,
(and if a reply is needed)
*reply_params, *reply_data_len
*reply_data, *reply_data_len
This allows the pointers and the lengths
that relate to these pointers to be next
to each other in the parameter list. This
makes seeing what you are passing to these
functions much easier to see.
Getting ready for adding the lib/rpc/client
functions needed to do security=domain.
torture.c: Fixed it so it uses / rather than \\
internally for the //machine/share syntax.
Jeremy.
quotas.c: Linux quota fix.
util.c: Ensure smb_read_error is zero in all calls that can set it.
lib/rpc/include/rpc_misc.h lib/rpc/include/rpc_netlogon.h
lib/rpc/parse/parse_misc.c lib/rpc/parse/parse_net.c
lib/rpc/server/srv_netlog.c : Modify Luke's code to call
SamOEMhash().
Jeremy.
Changed smbpasswd to be client-server for a normal user, rather
than accessing the private/smbpasswd file directly (it still accesses
this file directly when run as root, so root can add users/change a
users password without knowing the old password).
A shakeout of this change is that smbpasswd can now be used to
change a users password on a remote NT machine (yep - you heard
that one right - we can now change a NT password from UNIX !!!!!).
Jeremy.
"name resolve order" parameter.
source/Makefile: Re-ordered link for name resolve order code.
source/clientgen.c:
source/clientutil.c: Added calls to resolve_name().
source/includes.h: Added HPUX zombie fix.
source/loadparm.c: Added new name resolve order parameter.
source/namequery.c: Re-wrote to include parsing of lmhosts file, new resolve_name()
function requested by John.
source/nmbd.c: Tell resolve_name not to do WINS lookups if we are the WINS server.
source/nmbd_lmhosts.c: Call lmhosts parsing functions in namequery.c
source/password.c: Call resolve_name() to lookup security=server name.
source/reply.c:
source/time.c:
source/trans2.c: "fake directory create times" fix from Jim Hague - hague@research.canon.com.au.
source/util.c: Removed isalnum() test in Get_Hostname() that seems to cause
problems on many systems.
Jeremy.
clientgen.c:
clientutil.c:
clitar.c: Changed usage of receive_smb to new function client_receive_smb
except for one use of receive_smb in client.c. This is the
receive_smb used to discard packets received whilst in a
keyboard wait state.
util.c: Created new function client_receive_smb that ignores session
keepalives just as the old receive_smb used to do. Created
internal function read_smb_length_return_keepalive that is
used internally by the changed receive_smb call.
Changed read_smb_len to not use an internal buffer - it is
never called with a null buffer so such code is redundant.
Jeremy.
reply.c: Changed reply_open_and_X to split out the oplock
request bits from core and extended and if an oplock was granted only set
the corresponding bit on reply.
server.c: Added code to dynamically allocate i/o buffers in oplock_break
(prevents recursion problems) , also made reset of sent_oplock_break
explicit.
Jeremy.
added test in smbtorture for the server updating the directory modify
time when a file is added to a directory
cleanup in smbtorture so no garbage files are left on the server
