IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
* define some const SE_PRIV structure for use when
you need a SE_PRIV* to a privilege
* fix an annoying compiler warngin in smbfilter.c
* translate SIDs to names in 'net rpc rights list accounts'
* fix a seg fault in cli_lsa_enum_account_rights caused by
me forgetting the precedence of * vs. []
(based on Simo's code in trunk). Rewritten with the
following changes:
* privilege set is based on a 32-bit mask instead of strings
(plans are to extend this to a 64 or 128-bit mask before
the next 3.0.11preX release).
* Remove the privilege code from the passdb API
(replication to come later)
* Only support the minimum amount of privileges that make
sense.
* Rewrite the domain join checks to use the SeMachineAccountPrivilege
instead of the 'is a member of "Domain Admins"?' check that started
all this.
Still todo:
* Utilize the SePrintOperatorPrivilege in addition to the 'printer admin'
parameter
* Utilize the SeAddUserPrivilege for adding users and groups
* Fix some of the hard coded _lsa_*() calls
* Start work on enough of SAM replication to get privileges from one
Samba DC to another.
* Come up with some management tool for manipultaing privileges
instead of user manager since it is buggy when run on a 2k client
(haven't tried xp). Works ok on NT4.
supported pipe. Netlogon is still special, as we open that twice, one to do
the auth2, the other one with schannel.
The client interface is completely unchanged for those who only use a single
pie. cli->pipe_idx is used as the index for everything except the "real"
client rpc calls, which have been explicitly converted in my last commit. Next
step is to get winbind to just use a single smb connection for multiple pipes.
Volker
patches.
Pass down the pipe_idx down to all functions in cli_pipe where nt_pipe_fnum is
referenced. First step towards having multiple pipes on a cli_struct. The idea
is to not have a single nt_pipe_fnum but an array for the pipes we support.
Volker
The old #ifdef JRATEST-block was copying 16 bytes and thus overwriting
acct_flags with bizarre values, breaking a lot of things.
This patch is successfully running in a production environment for quite
some time now and is required to finally allow Exchange 5.5 to access
another Exchange Server when both are running on NT4 in a
samba-controlled domain. This also allows Exchange Replication to take
place, Exchange Administrator to access other Servers in the network,
etc. Fixes Bugzilla #1136.
Thanks abartlet for helping me with that one.
Guenther
* add IA64 to the architecture table of printer-drivers
* add new "net"-subcommands:
net rpc printer migrate {drivers|printers|forms|security|settings|all}
[printer]
net rpc share migrate {shares|files|all} [share]
this is the first part of the migration suite. this will will (once
feature-complete) allow to do 1:1 server-cloning in the best possible way by
making heavy use of samba's rpc_client-functions. all migration-steps
are implemented as rpc/smb-client-calls; net communicates via rpc/smb
with two servers at the same time (a remote, source server and a
destination server that currently defaults to the local smbd). this
allows e. g. printer-driver migration including driverfiles, recursive
mirroring of file-shares including file-acls, etc. almost any migration
step can be called with a migrate-subcommand to provide more flexibility
during a migration process (at the cost of quite some redundancy :) ).
"net rpc printer migrate settings" is still in a bad condition (many
open questions that hopefully can be adressed soon).
"net rpc share migrate security" as an isolated call to just migrate
share-ACLs will be added later.
Before playing with it, make sure to use a test-server. Migration is a
serious business and this tool-set can perfectly overwrite your
existing file/print-shares.
* along with the migration functions had to make I the following
changes:
- implement setprinter level 3 client-side
- implement net_add_share level 502 client-side
- allow security descriptor to be set in setprinterdata level 2
serverside
guenther
On systems with /dev/urandom, this avoids a change to secrets.tdb for every fork().
For other systems, we now only re-seed after a fork, and on startup.
No need to do it per-operation. This removes the 'need_reseed'
parameter from generate_random_buffer().
Andrew Bartlett
for setting up an schannel connection. This solves the problem
of a Samba DC running winbind, trusting a native mode AD domain,
and needing to enumerate AD users via wbinfo -u.
group_info4 in set_dom_group_info also has the level in the record
itself. This seems not to be an align. Tested with NT4 usrmgr.exe. It can
still create a domain group on a samba machine.
Volker
As well as avoiding DOS charset issues, this scheme returns useful error
codes, that we can map back via the pam interface.
This patch also cleans up the interfaces used for password buffers, to
avoid duplication of code.
Andrew Bartlett
domains, this patch ensures that we always use the ADS backend when
security=ADS, and the remote server is capable.
The routines used for this behaviour have been upgraded to modern Samba
codeing standards.
This is a change in behaviour for mixed mode domains, and if the trusted
domain cannot be reached with our current krb5.conf file, we will show
that domain as disconnected.
This is in line with existing behaviour for native mode domains, and for
our primary domain.
As a consequence of testing this patch, I found that our kerberos error
handling was well below par - we would often throw away useful error
values. These changes move more routines to ADS_STATUS to return
kerberos errors.
Also found when valgrinding the setup, fix a few memory leaks.
While sniffing the resultant connections, I noticed we would query our
list of trusted domains twice - so I have reworked some of the code to
avoid that.
Andrew Bartlett
rpc_parse/parse_lsa.c:
nsswitch/winbindd_rpc.c:
nsswitch/winbindd.h:
- Add const
libads/ads_ldap.c:
- Cleanup function for use
nsswitch/winbindd_ads.c:
- Use new utility function ads_sid_to_dn
- Don't search for 'dn=', rather call the ads_search_retry_dn()
nsswitch/winbindd_ads.c:
include/rpc_ds.h:
rpc_client/cli_ds.c:
- Fixup braindamage in cli_ds_enum_domain_trusts():
- This function was returning a UNISTR2 up to the caller, and
was doing nasty (invalid, per valgrind) things with memcpy()
- Create a new structure that represents this informaiton in a useful way
and use talloc.
Andrew Bartlett
defaults specified by the caller to prevail.
Don't use NTLM2 for RPC pipes, until we know how it works in signing or sealing.
Call ntlmssp_sign_init() unconditionally in the client - we setup the
session key, why not setup the rest of the data.
Andrew Bartlett
This means that we now support 'net rpc join' with KRB5 (des based)
logins. Now, you need to hack 'net' to do that, but the principal is
important...
When we add kerberos to 'net rpc', it should be possible to still do
user management and the like over RPC.
(server-side support to follow shortly)
Andrew Bartlett
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
the bind response to WKSSVC it does not send \PIPE\ntsvcs as NT4 (did not
check w2k) but \PIPE\wkssvc. I'm not sure whether we should make this check at
all, so making it a bit more liberal should hopefully not really hurt.
Volker
In cli_lsa_lookup_sids don't leave the domain field uninitialized if
some sid could not be mapped. Otherwise this call is unnecessarily
complicated to call.
Volker
