IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
be able to send a message to the "ldap_server" task without having to
know its task ID.
(This used to be commit 8f69867867857e0c9a9246c2dec9612ccc234724)
torture code that can tell the difference between dos and ntstatus
codes without mapping
(This used to be commit 5521060c089c2181a2f3c7aeabd2f3ba813c6e60)
set to the internal ldap server over loopback. The following happened:
- DCERPC_AUTH3 request
- auth requests calls ldb
- ldb calls ldap
- ldap calls our internal ldap server, triggering events
- samrConnect from client
- connect refused
- SMBclose from client
- causes dcerpc_pipe to be destroyed
- AUTH3 continues
- dies on freed pipe
I chose this solution as it provides a guarantee that backends only have to think about
async issues when they mark a request async. When they don't, this code guarantees that
a second request won't happen on the same connection while processing the first one
(This used to be commit 45487e8a1402c64d1c314befe8bd9f65587fd0d6)
amazingly, I have seen w2k do a session setup followed by an immediate
attempted opening of \netlogon, with no tconx to ipc$ first. So this
error code can matter.
(This used to be commit 79112d81cb9ea3fc7e94be1af282ab4247170532)
behaviour on session setups, and because we no longer need do deal
with the linked list as much, the code is much simpiler too.
We may be able to compleatly remove the tid and vuid linked lists, but
I need to check.
This patch also tries to clean up the VUID handling and session setups
in general. To avoid security issues, we now have a distinction
between VUIDs allocated for the session setup (to tie togeather the
multiple round trips) and those used after authentication.
Andrew Bartlett
(This used to be commit 3e5775146d9ce6f0ac43aecae7e899b5324399ad)
- change the iface_n_*() functions to return a "const char *" instead of a "struct ipv4_addr"
I think that in general we should move towards "const char *" for
all IP addresses, as this makes IPv6 much easier, and is also easier
to debug. Andrew, when you get a chance, could you fix some of the
auth code to use strings for IPs ?
- return a NTSTATUS error on bad name queries and node status instead
of using rcode. This makes the calling code simpler.
- added low level name release code in libcli/nbt/
- use a real IP in the register and wins nbt torture tests, as w2k3
WINS server silently rejects some operations that don't come from the
IP being used (eg. it says "yes" to a release, but does not in fact
release the name)
(This used to be commit bb1ab11d8e0ea0bd9ae34aebeb565d36fe4b495f)
make it possible to add optimisations to the events code such as
keeping the next timed event in a sorted list, and using epoll for
file descriptor events.
I also removed the loop events code, as it wasn't being used anywhere,
and changed timed events to always be one-shot (as adding a new timed
event in the event handler is so easy to do if needed)
(This used to be commit d7b4b6de51342a65bf46fce772d313f92f8d73d3)
servers in smbd. The old code still contained a fairly bit of legacy
from the time when smbd was only handling SMB connection. The new code
gets rid of all of the smb_server specific code in smbd/, and creates
a much simpler infrastructures for new server code.
Major changes include:
- simplified the process model code a lot.
- got rid of the top level server and service structures
completely. The top level context is now the event_context. This
got rid of service.h and server.h completely (they were the most
confusing parts of the old code)
- added service_stream.[ch] for the helper functions that are
specific to stream type services (services that handle streams, and
use a logically separate process per connection)
- got rid of the builtin idle_handler code in the service logic, as
none of the servers were using it, and it can easily be handled by
a server in future by adding its own timed_event to the event
context.
- fixed some major memory leaks in the rpc server code.
- added registration of servers, rather than hard coding our list of
possible servers. This allows for servers as modules in the future.
- temporarily disabled the winbind code until I add the helper
functions for that type of server
- added error checking on service startup. If a configured server
fails to startup then smbd doesn't startup.
- cleaned up the command line handling in smbd, removing unused options
(This used to be commit cf6a46c3cbde7b1eb1b86bd3882b953a2de3a42e)
- stream_socket services
the smb, ldap and rpc service which sets up a srtam socket end then
waits for connections
and
- task services
which this you can create a seperate task that do something
(this is also going through the process_model subsystem
so with -M standard a new process for this created
with -M thread a new thread ...
I'll add datagram services later when we whave support for datagram sockets in lib/socket/
see the next commit as an example for service_task's
metze
(This used to be commit d5fa02746c6569b09b6e05785642da2fad3ba3e0)
- added #if TALLOC_DEPRECATED around the _p functions
- fixes the code that broke from the above
while doing this I fixed quite a number of places that were
incorrectly using the non type-safe talloc functions to use the type
safe ones. Some were even doing multiplies for array allocation, which
is potentially unsafe.
(This used to be commit 6e7754abd0c225527fb38363996a6e241b87b37e)
maintaining the async nature of the server. This is done with a
SMBtrans request queue for partially completed requests.
The smb signing issues with this get a little tricky, but it now seems
to work fine
(This used to be commit bc0209058b76a947ad27673aeb096d11a168996b)
- change smbcli_read/write to take void * for the buffers to match read(2)/write(2)
all this fixes a lot of gcc-4 warnings
metze
(This used to be commit b94f92bc6637f748d6f7049f4f9a30b0b8d18a7a)
The previous code didn't handle the case where the file got renamed or
deleted while waiting for the sharing violation delay. To handle this
we need to make the 2nd open a full open call, including the name
resolve call etc. Luckily this simplifies the logic.
I also expanded the RAW-MUX test to include the case where we do
open/open/open/close/close, with the 3rd open async, and that open
gets retried after both the first close and the 2nd close, with the
first retry failing and the 2nd retry working. The tests the "async
reply after a async reply" logic in pvfs_open().
(This used to be commit eded2ad9c91f5ba587ef4f7f5f5a6dceb4b51ff3)
- use #include <XXX.h> for operating system includes
- use includes relative to include/ for things like system/wait.h
also fixed the thread backend to work somewhat. To fix it properly we need to do this:
- add a configure test for support for thread local storage (the __thread keyword)
- refuse to do pthreads if tls doesn't work
- refuse to do pthreads if seteuid() affects process instead of thread
- defined THREAD_LOCAL as __thread when WITH_PTHREADS
- add THREAD_LOCAL to all the global data structures that should be
thread local (there are quite a few)
right now the thread backend falls over when you hit it with several
connections at once, due to the lack of __thread on some critical
structures.
(This used to be commit 0dc1deabd0b53bc7a6f6cee2ed99e2cbbe422262)
deferred reply is short-circuited immediately when the file is
closed by another user, allowing it to be opened by the waiting user.
- added a sane set of timeval manipulation routines
- converted all the events code and code that uses it to use struct
timeval instead of time_t, which allows for microsecond resolution
instead of 1 second resolution. This was needed for doing the pvfs
deferred open code, and is why the patch is so big.
(This used to be commit 0d51511d408d91eb5f68a35e980e0875299b1831)
I have created the include/system/ directory, which will contain the
wrappers for the system includes for logical subsystems. So far I have
created include/system/kerberos.h and include/system/network.h, which
contain all the system includes for kerberos code and networking code.
These are the included in subsystems that need kerberos or networking
respectively.
Note that this method avoids the mess of #ifdef HAVE_XXX_H in every C
file, instead each C module includes the include/system/XXX.h file for
the logical system support it needs, and the details are kept isolated
in include/system/
This patch also creates a "struct ipv4_addr" which replaces "struct
in_addr" in our code. That avoids every C file needing to import all
the system networking headers.
(This used to be commit 2e25c71853f8996f73755277e448e7d670810349)
- get rid of req->mid, as it isn't a safe value to use to match
requests in the server (it is safe in the client code, as we choose
the mid, but in the server we can't rely on other clients to choose
the mid carefully)
(This used to be commit 938fb44351e12a515073ea94cd306988d5ca7340)
the idea is that a passthru module can use ntvfs_async_state_push() before
calling ntvfs_next_*() and in the _send function it calls
ntvfs_async_state_pop() and then call the upper layer send_fn itself
- ntvfs_nbench is now fully async
- the ntvfs_map_*() functions and the trans(2) mapping functions are not converted yet
metze
(This used to be commit fde64c0dc142b53d128c8ba09af048dc58d8ef3a)
haven't marked the socket non-blocking yet as I haven't checked that
the send path is OK for non-blocking.
(This used to be commit bda978cc2a921a888534054135b9325427425dd2)
The main change is to make socket_recv() take a pre-allocated buffer,
rather than allocating one itself. This allows non-blocking users of
this API to avoid a memcpy(). As a result our messaging code is now
about 10% faster, and the ncacn_ip_tcp and ncalrpc code is also
faster.
The second change was to remove the unused mem_ctx argument from
socket_send(). Having it there implied that memory could be allocated,
which meant the caller had to worry about freeing that memory (if for
example it is sending in a tight loop using the same memory
context). Removing that unused argument keeps life simpler for users.
(This used to be commit a16e4756cd68ca8aab4ffc59d4d9db0b6e44dbd1)
rather than doing everything itself. This greatly simplifies the
code, although I really don't like the socket_recv() interface (it
always allocates memory for you, which means an extra memcpy in this
code)
- fixed several bugs in the socket_ipv4.c code, in particular client
side code used a non-blocking connect but didn't handle EINPROGRESS,
so it had no chance of working. Also fixed the error codes, using
map_nt_error_from_unix()
- cleaned up and expanded map_nt_error_from_unix()
- changed interpret_addr2() to not take a mem_ctx. It makes absolutely
no sense to allocate a fixed size 4 byte structure like this. Dozens
of places in the code were also using interpret_addr2() incorrectly
(precisely because the allocation made no sense)
(This used to be commit 7f2c771b0e0e98c5c9e5cf662592d64d34ff1205)
- the stacking of modules
- finding the modules private data
- hide the ntvfs details from the calling layer
- I set NTVFS_INTERFACE_VERSION 0 till we are closer to release
(because we need to solve some async problems with the module stacking)
metze
(This used to be commit 3ff03b5cb21bb79afdd3b1609be9635f6688a539)
library are closed on abnormal termination
- convert the service.h structures to the new talloc methods
(This used to be commit 2dc334a3284858eb1c7190f9687c9b6c879ecc9d)
server code. This fixes a number of memory leaks I found when testing
with valgrind and smbtorture, as the cascading effect of a
talloc_free() ensures that anything derived from the top level object
is destroyed on disconnect.
(This used to be commit 76d0b8206ce64d6ff4a192979c43dddbec726d6e)
like it in the mainline code (outside the smb.conf magic).
We will need to have a more useful 'helper' routine for this, but for
now we at least get a reliable IP address.
Also remove the unused 'socket' structure in the smb server - it seems
to have been replaced by the socket library.
Andrew Bartlett
(This used to be commit d8fd19a2020da6cce691c0db2b00f42e31d672cc)
