IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Same code, less lines
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Nov 13 04:10:54 CET 2018 on sn-devel-144
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Mon Nov 12 13:44:09 CET 2018 on sn-devel-144
When a keytab of type MEMORY is used, the MIT kerberos krb5_kt_add_entry()
library function adds a keytab entry to the beginning of the keytab table,
instead of the end.
This adds a MIT kerberos conditional to reverse iterate through
the keytable entries to address this.
Signed-off-by: Justin Stephenson <jstephen@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Alexander Bokovoy <ab@samba.org>
Autobuild-Date(master): Sat Nov 10 12:48:02 CET 2018 on sn-devel-144
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Nov 10 02:19:29 CET 2018 on sn-devel-144
mdb_copy() was dutifully checking the PATH for the mdb_copy executable,
then, if it didn't find it, blindly proceeding anyway and trying to run
a non-existent executable. This resulted in a cryptic error:
ERROR(<type 'exceptions.OSError'>): uncaught exception - [Errno 2] No
such file or directory
Add in an extra check that we actually find the executable and raise a
better human-readable exception if we don't.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Nov 9 21:07:47 CET 2018 on sn-devel-144
When we created the backup-file for the restoredc/renamedc/labdc
testenvs we weren't explicitly a --configfile on the samba-tool command.
This meant the command tried to use the smb.conf form the default
install location, i.e. /usr/local/samba/etc/smb.conf. On the gitlab CI
runner, there's no samba installed, so it ends up using the default
settings, which is fine. However, if the host machine had an invalid
smb.conf installed there, creating the testenv would fail with an error
like:
ERROR(runtime): uncaught exception - Unable to load default file
File "bin/python/samba/netcmd/__init__.py", line 184, in _run
return self.run(*args, **kwargs)
File "bin/python/samba/netcmd/domain_backup.py", line 222, in run
lp = sambaopts.get_loadparm()
File "bin/python/samba/getopt.py", line 94, in get_loadparm
self._lp.load_default()
We can avoid this by always explictly specifying the backupfromdc's
smb.conf when creating the backup file.
Likewise, labdc/customdc also need the config specified when the admin
password is reset.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
We always need to specify "env->{CONFIGURATION}" when running a samba-tool
command to setup a testenv. Add a note to the README as this wasn't at
all clear.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Fix fallout from the KDC prefork patchset (99aea42520fc..).
GCC warns when Samba is being built with --with-system-mitkrb5.
Fix this by adapting the signature of mitkdc_task_init() to match
task_init which has been extended to return a status code.
Status codes try to mimick those of kdc-heimdal.c:kdc_task_init()
as closely as possible.
Signed-off-by: Philipp Gesang <philipp.gesang@intra2net.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Nov 9 03:49:55 CET 2018 on sn-devel-144
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Nov 8 11:03:11 CET 2018 on sn-devel-144
This fixes a segfault in pyglue:
==10142== Process terminating with default action of signal 11 (SIGSEGV)
==10142== Bad permissions for mapped region at address 0x6F00A20
==10142== at 0x6F1074B: py_set_debug_level (pyglue.c:165)
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13679
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Nov 7 21:17:59 CET 2018 on sn-devel-144
Allow the rpc_server to run in the prefork process model. Due to the use
of shared handles and resources all of the rpc end points are serviced
in the first worker process. Those end points that can be run in
multiple processes (currently only Netlogon and management) are serviced in
the first and any subsequent workers.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Pass the instance number to the post_fork hook. This is required to
allow the rpc_server to support the prefork process model.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Increase the default number of worker processes started by the pre-fork
process model from 1 to 4.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Convert the ad_dc environment from single process model to the prefork
process model.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
generate_users_and_groups() now generates the machine acounts as well as
the user accounts, so it seems there's no need to also have
generate_traffic_accounts(), which does the same job.
Instead, we can just pass through the number of machine acounts to
generate_users_and_groups() and delete the other function.
Also updated generate_users_and_groups() so that machine_accounts is
no longer optional (we want to create machine accounts in all cases).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
