IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We've seen this function report "Unknown family, 0" and then CTDB
disappeared without a trace. If we can reproduce it then this might
help us to debug it.
The idea is that you do something like the following in /etc/sysconfig/ctdb:
export CTDB_EXTERNAL_TRACE="/etc/ctdb/config/gcore_trace.sh"
When we hit this error than we call out to gcore to get a core file so
we can do forensics. This might block CTDB for a few seconds.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 7895bc003f087ab2f3181df3c464386f59bfcc39)
Thanks to Ronnie for highlighting the issue of memory lockdown on AIX.
Fix typo, use getuid and not getpid.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 21a5cbf9518fafc610939f14874371a52b1dc8b3)
Wrap all creation of child processes inside ctdb_fork() which is used to track all processes we have spawned.
Capture SIGCHLD to track also which child processes have terminated.
Wrap kill() inside ctdb_kill() and make sure that we never send a !0 signal to a child process pid that has already terminated (and might have been replaced with a
(This used to be ctdb commit f73a4b1495830bcdd094a93732a89dd53b3c2f78)
there are some child processes where we do not create a connection to the main daemon (switch_from_server_to_client()) because it is expensive to set up and we normally might not need to talk to the daemon at all via a domainsocket.
but we might want to still call to ctdb_ltdb_store() from such chil processes.
(This used to be ctdb commit 9e372a08c40087e6b5335aa298e94d88273566a5)
scheduler for the child.
Use ctdb_fork() from callers where we dont want the child to be running
at real-time privilege.
(This used to be ctdb commit 58795a4c9e0624e20fa3e0023b65127053edd103)
Revert this patch:
commit 482c302d46e2162d0cf552f8456bc49573ae729d
We may need to use real-time processes for the main daemon and the recovery daemon to handle the cases where systems come under very high loads.
(This used to be ctdb commit 08bef9dcab6e4da15fc783f8624e5ed09aa060b5)
This reverts commit f7e91ae905cd61249028e15f2cb509ea69f10b9e.
This may require a change to the ctdb protocol, or a mechanism
to negotiate/verify that we dont run with different hash fucntions
across the cluster.
Reverting the change until we decide how to solve this in the master
version.
(This used to be ctdb commit 2a2a7a201c90462295544ca23c8a3e215f140622)
This is called everytime a reallocation is performed.
While STARTRECOVERY/RECOVERED events are only called when
we do ipreallocation as part of a full database/cluster recovery,
this new event can be used to trigger on when we just do a light
failover due to a node becomming unhealthy.
I.e. situations where we do a failover but we do not perform a full
cluster recovery.
Use this to trigger for natgw so we select a new natgw master node
when failover happens and not just when cluster rebuilds happen.
(This used to be ctdb commit 7f4c591388adae20e98984001385cba26598ec67)
In Samba this is now called "tevent", and while we use the backwards
compatibility wrappers they don't offer EVENT_FD_AUTOCLOSE: that is now
a separate tevent_fd_set_auto_close() function.
This is based on Samba version 7f29f817fa.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 85e5e760cc91eb3157d3a88996ce474491646726)
Ronnie and I tracked down a bug which seems to be caused by a node
running so slowly that we timed out the request and reused the request
id before it responded.
The result was that we unlocked the wrong record, leading to the
following:
ctdbd: tdb_unlock: count is 0
ctdbd: tdb_chainunlock failed
smbd[1630912]: [2010/06/08 15:32:28.251716, 0] lib/util_sock.c:1491(get_peer_addr_internal)
ctdbd: Could not find idr:43
ctdbd: server/ctdb_call.c:492 reqid 43 not found
This exact problem is now detected, but in general we want to delay
id reuse as long as possible to make our system more robust.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 9eb9c53ef29f4871ae2fe62fc5cb6145fca89eed)
This resolves a problem with huge numbers of requests which could overflow
16 bits. Fortunately, the IDR should scale reasonably well, so we can simply
hold all the requests.
Although noone checks for failure, I added a constant for that.
BZ: 60540
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 72efc4122e37798227c3420a65ed1f706ca9ebe7)
In the case of a timeout, we dump a log of what's happening to a file
in /tmp. We do it from the signal handler, which is an unreliable hack
(BZ58365).
Instead, create another (lower-priority) child to do the dump, then
kill the timedout script.
Note that this doesn't quite work as intended (the dump is often run
after the script has been killed), so the next patch resolves this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 7ee5ecc8d53e78e2dec21197b74a74cc4ae1834c)
This is needed because the "startup" event runs after the initial recovery,
but we need to do some actions before the initial recovery.
metze
(This used to be ctdb commit e953808449c102258abb6cba6f4abf486dda3b82)
We don't want ctdb stalling due to paging; this can be far worse than
scheduling delays. But if we simply do mlockall(MCL_FUTURE), it
increases the risk that mmap (ie. tdb open) or malloc will fail,
causing us to abort.
This patch is a compromise: we mlock all current pages (including
10k of future stack for expansion) and then relock when a client
asks us to open a TDB. We warn, but don't exit, if it fails.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 82f778e85440bc713d3f87c08ddc955d3cfce926)
1) It's buggy. Code needs to be carefully written (ie. no busy
loops) to handle running with it, and we fork and run scripts.[1]
2) It makes debugging harder. If ctdbd loops (as has happened recently)
it can be extremely hard to get in and see what's happening. We've already
seen the valgrind hacks.
3) We have seen recent scheduler problems. Perhaps they are unrelated,
but removing this very unusual setup is unlikely to hurt.
4) It doesn't make anything faster. Under all but the most perverse of
circumstances, 99% of the cpu gives the same performance as 100%, and
we will always preempt normal processes anyway.
[1] I made this worse in 0fafdcb8d353 "eventscript: fork() a child for
each script" by removing the switch_from_server_to_client() which
restored it, but even that was only for monitor scripts. Others were
run with RT priority.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 482c302d46e2162d0cf552f8456bc49573ae729d)
We're going to need this so ctdb can query non-monitor status.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 53bc5ca23ca55a3ac63a440051f16716944a2a51)
validate the input values used and refuse setting the debug level to an unknown value
(This used to be ctdb commit daec49cea1790bcc64599959faf2159dec2c5929)
Log this in "ctdb statistics".
Also add a varaible "RecLockLatencyMs" that will log an error everytime it takes longer than this to access the reclock file.
(This used to be ctdb commit 042377ed803bb8f7ca9d6ea1a387427b7b8ba45a)
log the type of operation and the database name for all latencies higher
than a treshold
(This used to be ctdb commit 1d581dcd507e8e13d7ae085ff4d6a9f3e2aaeba5)
older ipv4-only version of these controls.
We need this so that we are backwardcompatible with old versions of ctdb
and so that we can interoperate with a ipv4-only recmaster during a
rolling upgrade.
(This used to be ctdb commit 6b76c520f97127099bd9fbaa0fa7af1c61947fb7)
This enhances the framework for sending tcp tickles to be able to send ipv6 tickles as well.
Since we can not use one single RAW socket to send both handcrafted ipv4 and ipv6 packets, instead of always opening TWO sockets, one ipv4 and one ipv6 we get rid of the helper ctdb_sys_open_sending_socket() and just open (and close) a raw socket of the appropriate type inside ctdb_sys_send_tcp().
We know which type of socket v4/v6 to use based on the sin_family of the destination address.
Since ctdb_sys_send_tcp() opens its own socket we no longer nede to pass a socket
descriptor as a parameter. Get rid of this redundant parameter and fixup all callers.
(This used to be ctdb commit 406a2a1e364cf71eb15e5aeec3b87c62f825da92)
