IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Once DB_PUSH_START is processed as part of recovery, push_started
flag tracks if there are multiple attempts to send DB_PUSH_START.
In DB_PUSH_CONFIRM, once the record count is confirmed, all information
related to DB_PUSH should be reset. However, The push_started flag was
not reset when the push_state was reset.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Jun 8 14:31:52 CEST 2016 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11956
In do_recovery, after the recovery and takeover is complete, recoverd
event is triggered. When the parallel database recovery was separated,
ctdb_recovery_helper implemented sending END_RECOVERY control which
causes recoverd event to be triggered. So when there is parallel database
recovery, recoverd event is triggered twice.
Instead move the call to run_recovered_eventscript() explicitly in
the serial recovery code path. This avoids the duplication trigger of
recoverd event.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This generates takeip-pre and releaseip-pre call-out events.
One use is to put NFS into grace before an IP is assigned to an
interface.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
A second NFS eventscript may be required, so make this code available
to it.
The initialisation code can't be evaluated in the functions file
because service_state_dir isn't yet setup, so put it in a function and
call it with other initialisation code.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Wed Jun 8 04:52:18 CEST 2016 on sn-devel-144
The recovery lock helper must exit when it notices its parent is gone.
However, that can take a few seconds.
The usual way of terminating the recovery daemon is for the main ctdbd
to send it a SIGTERM. Installing a handler is nice and simple.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the process holding the recovery lock terminates unexpectedly then
the recovery daemon needs to know that the lock is no longer held.
While here, rename hold_reclock_handler() to take_reclock_handler() so
there is a clear difference between the two handler names.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This makes the API more general. If they are needed in a handler then
they can be in the private data.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This will allow a simplification of the cluster mutex API, so the
private data can be registered when calling ctdb_cluster_mutex().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It won't be called more than once by the cluster mutex code.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
After the first activity on the file descriptor, ignore any subsequent
activity. Single-shot handlers are easier to write.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It isn't necessarily a file.
Don't bother changing the control, since it doesn't pervade the code.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Setting the recovery lock file at startup can be done more simply.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Support for updating the recovery lock is being removed because it
isn't possible to recover from failure.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the recovery lock setting is not consistent with that of the
recovery master then abort.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The recovery lock can not be reliably updated at run-time. If it
fails to update on some nodes then split-brain protection is gone and
there is no reasonable way to repair the situation. CTDB will have to
be restarted on all nodes. So, if this feature is being used to avoid
scheduling an outage then an outage will have to be scheduled just in
case!
To update the recovery lock, shut down CTDB on all nodes, reconfigure
the recovery lock and start CTDB again.
Those that *really* want to be able to change the recovery lock at
run-time can still do so. Set CTDB_RECOVERY_LOCK to point to a script
and this script can then be modified at run-time. However, please
don't report bugs if bad things happen...
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11946
Commit 670db6ac1d split tevent-util public
library to create tevent-unix-util public library for standalone ctdb
use. This created a public library dependency between samba and ctdb
for packaging.
Bundle tevent_unix.c in public library tevent-util as before. However,
to avoid the dependencies for packaging, standalone ctdb build will
build tevent-util as a private library with only tevent_unix.c
This simplifies any new subsystems (or libraries) which need tevent-util
and are linked in both samba and ctdb.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
The timeout RecoverTimeout (default 120) is used for control messages
sent during the recovery. If any of the nodes does not respond to any
of the recovery control messages for RecoverTimeout seconds, then it
will cause a failure of recovery of a database. Recovery helper will
retry the recovery for a database 5 times.
In the worst case, if a database could not be recovered within 5 attempts,
a total of 600 seconds would have passed. During this time period other
timeouts will be triggered causing unnecessary failures as follows:
1. During the recovery, even though recoverd is processing events,
it does not send a ping message to ctdb daemon. If a ping message is
not received for RecdPingTimeout (default 60) seconds, then ctdb will
count it as unresponsive recovery daemon. If the recovery daemon
fails for RecdFailCount (default 10) times, then ctdb daemon will
restart recovery daemon. So after 600 seconds, ctdb daemon will
restart recovery daemon.
2. If ctdb daemon stays in recovery for RecoveryDropAllIPs (default 120),
then it will drop all the public addresses. This will cause all
SMB client to be disconnected unnecessarily. The released public
addresses will not be taken over till the recovery is complete.
To avoid dropping of IPs and restarting recovery daemon during a delayed
recovery, adjust RecoverTimeout to 30 seconds and limit number of
retries for recovering a database to 3. If we don't hear from a node
for more than 25 seconds, then the node is considered disconnected.
So 30 seconds is sufficient timeout for controls during recovery.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Mon Jun 6 08:49:15 CEST 2016 on sn-devel-144
If the node becomes stopped or banned after recovery is marked
active, then it will never freeze the databases, and hence the
node will keep banning itself indefinitely, until ctdbd is restarted.
This is a regression from 4.3, introduced with
b4357a79d9
and
d8f3b490bb
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11945
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Wed Jun 1 17:36:12 CEST 2016 on sn-devel-144
This adapts the debug message in local_node_got_banned
to reflect what the function is currently doing.
This message was not adapted when the function was changed.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Jun 1 04:30:36 CEST 2016 on sn-devel-144
Both of these expand to 1. However, AF_LOCAL is a Unix domain socket,
which makes no sense when reading the code.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Thu May 26 11:42:46 CEST 2016 on sn-devel-144
With an empty value the first expression adds a trailing opening
quote, so the second expression doesn't add the closing quote. Handle
this with a special case.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This doesn't need to print the family. Nothing uses it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Stub scripts are more obvious. rc.local should only be used when
strictly necessary.
iptables_wrapper doesn't need to be no-op-ed, provided flock is
installed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Block and unblock IP addresses using these new functions. This makes
the code more readable.
The case statement in each function is very cheap, so there is no need
to prematurely optimise and pass the family.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB_INIT_STYLE isn't used in this script.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Kai Blin <kai@samba.org>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri May 20 21:06:18 CEST 2016 on sn-devel-144
