IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There is a chance that restoring IP addresses to the test node will
result in different IP addresses being assigned to that node.
Removing a single IP address may then fail (or be a no-op) if it is
done after the restore.
So, swap the single IP address removal to happen first, then restore,
then remove all IP addresses.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ctdb reloadips will fail if it can't disable takover runs. The most
likely reason for this is that there is already a takeover run in
progress. We can't predict when this will happen, so retry if this
occurs.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Otherwise, when looping tests for a long time, nodes are unable to
connect to each other.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon May 13 08:42:44 UTC 2019 on sn-devel-184
error: ‘%04d’ directive writing between 4 and 11 bytes into a region of
size 5 [-Werror=format-overflow=]
sprintf(key, "key%04d", i);
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Since commit 0e9ead8f28 daemons have
been shut down after each test, so this option no longer has anything
to do with killing daemons.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Sometimes the detach test fails:
Check detaching single test database detach_test1.tdb
BAD: database detach_test1.tdb is still attached
Number of databases:4
dbid:0x5ae995ee name:detach_test4.tdb path:tests/var/simple/node.0/db/volatile/detach_test4.tdb.0
dbid:0xd84cc13c name:detach_test3.tdb path:tests/var/simple/node.0/db/volatile/detach_test3.tdb.0
dbid:0x8e8e8cef name:detach_test2.tdb path:tests/var/simple/node.0/db/volatile/detach_test2.tdb.0
dbid:0xc62491f4 name:detach_test1.tdb path:tests/var/simple/node.0/db/volatile/detach_test1.tdb.0
Number of databases:3
dbid:0x5ae995ee name:detach_test4.tdb path:tests/var/simple/node.1/db/volatile/detach_test4.tdb.1
dbid:0xd84cc13c name:detach_test3.tdb path:tests/var/simple/node.1/db/volatile/detach_test3.tdb.1
dbid:0x8e8e8cef name:detach_test2.tdb path:tests/var/simple/node.1/db/volatile/detach_test2.tdb.1
Number of databases:4
dbid:0x5ae995ee name:detach_test4.tdb path:tests/var/simple/node.2/db/volatile/detach_test4.tdb.2
dbid:0xd84cc13c name:detach_test3.tdb path:tests/var/simple/node.2/db/volatile/detach_test3.tdb.2
dbid:0x8e8e8cef name:detach_test2.tdb path:tests/var/simple/node.2/db/volatile/detach_test2.tdb.2
dbid:0xc62491f4 name:detach_test1.tdb path:tests/var/simple/node.2/db/volatile/detach_test1.tdb.2
*** TEST COMPLETED (RC=1) AT 2019-04-27 03:35:40, CLEANING UP...
When issued from a client, the detach control re-broadcasts itself
asynchronously to all nodes and then returns success. The controls to
some nodes to do the actual detach may still be in flight when success
is returned to the client. Therefore, the test should wait for a few
seconds to allow the asynchronous controls to complete.
The same is true for the attach control, so workaround the problem in
the attach test too.
An alternative is to make the attach and detach controls synchronous
by avoiding the broadcast and waiting for the results of the
individual controls sent to the nodes. However, a simple
implementation would involve adding new nested event loops.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This sometimes fails, apparently due to a cat process in onnode
getting EAGAIN. The conclusion is that tests that process large
amounts of output should not depend on a sub-shell delivering that
output into a shell variable.
Change try_command_on_node() to leave all of the output in file
$outfile and just put the first 1KB into $out. $outfile is removed
after each test completes.
Change the implementation of sanity_check_output() to use $outfile
instead of $out.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
All callers are currently passed $out. Global variable $out is used
in many other places so use it here to simplify the interface and make
future changes simpler.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB's system memory monitoring in 05.system.script monitors both main
memory and swap. The swap monitoring was originally based on
the (possibly incorrect, see below) idea that swap space stacks on top
of main memory, so that when a system starts filling swap space then
this is supposed to be a good sign that the system is running out of
memory. Additionally, performance on a Linux system tends to be
destroyed by the I/O associated with a lot of swapping to spinning
disks.
However, some platforms default to creating only 4GB of swap space
even when there is 128GB of main memory. With such a small swap to
main memory ratio, memory pressure can force swap to be nearly full
even when a significant amount of main memory is still available and
the system is performing well. This suggests that checking swap
utilisation might be less than useful in many circumstances.
So, remove the separate swap space checking and change the memory
check to cover the total of main memory and swap space.
Test function set_mem_usage() still takes an argument for each of main
memory and swap space utilisation. For simplicity, the same number is
now passed twice to make the intended results comprehensible. This
could be changed later.
A couple of tests are cleaned up to no longer use hard-coded
/proc/meminfo and ps output.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If a data packet arrives which exceeds the queue's current buffer size,
the buffer needs to be increased to hold the full packet. Once the packet
is processed the buffer size should be decreased to its standard size again.
This test case verifies this process.
Signed-off-by: Swen Schillig <swen@linux.ibm.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Christof Schmitt <cs@samba.org>
Autobuild-User(master): Christof Schmitt <cs@samba.org>
Autobuild-Date(master): Wed Apr 10 00:17:37 UTC 2019 on sn-devel-144
Some test scenarios require access to the created queue.
Prepare the test_setup function to provide it as additional parameter.
Signed-off-by: Swen Schillig <swen@linux.ibm.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Christof Schmitt <cs@samba.org>
The tests are written around the default of sysvinit-redhat. Add
support for systemd-redhat.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13860
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
This can be used to test the version checking logic. Cache the
version to avoid re-checking the environment variable each time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
This file is included by local_daemons.sh, which is not a bash script
and wait_until() uses the "local" keyword. Prefixing variable names
with '_' to indicate that they are local changes a lot of lines in
this function. So, fix indentation, potential quoting problems and
other ShellCheck hits while touching this function.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
This isn't used anywhere that requires it to be exported, but the lack
of consistency will cause problems and confusion at some later stage.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
ctdb_sock_addr values are hashed in some contexts. This means that
all of the memory used for the ctdb_sock_addr should be consistent
regardless of how parsing is done. The first 2 cases are just sanity
checks but the 3rd case involving an IPv4-mapped IPv6 address is the
real target of this test addition.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13839
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
CTDB_CLUSTER_MUTEX_HELPER can't be depended on because it is only set
when the tests are not installed and setting it unconditionally for
this particular use would be wrong.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13800
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@samba.org>
Under the covers, a command is always used. However, there is no way
of testing of the code path where a command is explicitly configured.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13800
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13791
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Feb 22 03:51:37 CET 2019 on sn-devel-144
Checking that the database contains 0 records cause a traverse. This
may take a lock and cause vacuuming to fail (or be deferred for a
particular record/chain). Minimise the chance of this happening by
only checking for 0 records every 10 seconds.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This can result in Unix domain socket names that are too long.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Dec 18 05:31:00 CET 2018 on sn-devel-144
If CTDB_BASE is relative then the symbolic link target will be
incorrect.
Don't force CTDB_BASE to be absolute because this can result in Unix
domain socket names that are too long.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Event scripts (well, statd_callout) can change directory, causing
stubs to be unable to locate EVENTSCRIPTS_TESTS_VAR_DIR if it is
relative.
Don't force TEST_VAR_DIR to be absolute because this can result in
Unix domain socket names that are too long.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If TEST_VAR_DIR is relative then symbolic link targets will be
incorrect.
Don't force TEST_VAR_DIR to be absolute because this can result in
Unix domain socket names that are too long.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Ideally this would just involve using "test -r". However, operating
system security features may mean that kernel stacks are not readable
even though they appear to be.
Instead, try reading that stack of a process on the test node. If
that succeeds then so should reading the stack of the "stuck" sleep
process in the test.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13684
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Tim Beale <timbeale@catalyst.net.nz>
Autobuild-User(master): Tim Beale <timbeale@samba.org>
Autobuild-Date(master): Thu Nov 15 08:15:32 CET 2018 on sn-devel-144
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Nov 8 11:03:11 CET 2018 on sn-devel-144
Explicitly background ctdbd instead.
This has the advantage of leaving stdin open. ctdbd can then be
enhanced to exit when stdin closes, allowing better cleanup in a test
environment.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Nov 6 10:30:14 CET 2018 on sn-devel-144
These aren't used by simple tests but they will be useful for
integrating ctdbd local daemons into other test suites and for
debugging.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The etc-ctdb/ subdirectory containing the event script moves into the
top-level tests/ directory because the subdirectory is really now
owned by local_daemons.sh instead of simple/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This provides a separate script for handling local daemons. It can be
used for testing outside of the CTDB simple test suite. It is
installed as ctdb_local_daemons.
The logic is copied from ctdb/tests/simple/scripts/local_daemons.bash.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Always create an empty event script directory. If $TEST_SUBDIR is
unset then don't use it to look for etc-ctdb/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Don't calculate this locally as _tools_dir. Add it to PATH
unconditionally - this may result in duplicate entries in PATH but the
resulting code is simpler.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Don't calculate this locally as _test_bin_dir. Just calculate
top_dir, source script_install_paths.sh and use
$CTDB_SCRIPT_TESTS_BINDIR.
Don't bother sanity checking if TEST_BIN_DIR is set. It will go away
soon.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
