IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In certain circumstance, which aren't obvious, cat(1) can fail when
attempting to write a lot of data. This is due to something (probably
write(2)) returning EAGAIN.
Given that the -v option should only really be used for test
debugging, ignore the failure instead of spending time debugging it.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14446
Signed-off-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Jul 22 04:10:47 UTC 2020 on sn-devel-184
Avoid use of non-portable md5sum by constructing database names using
index. Improve indentation, use more modern commands, code
improvements (shellcheck).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Select test node with IPs instead of using a fixed node. Remove
unnecessary code, use more modern commands, code
improvements (shellcheck).
Signed-off-by: Martin Schwenke <martin@meltin.net>
"wc -l" on some platforms (e.g. FreeBSD) contains leading spaces and
stops "$num from being a number. Create a more portable solution and
put it in a function instead of repeating the logic.
Signed-off-by: Martin Schwenke <martin@meltin.net>
It would be nice to get rid of "onnode any". There's no use making
tests nondeterministic. If covering different cases matters then they
should be explicitly handled.
In most places "any" is replaced by "$test_node". In some cases,
where $test_node is not set, a fixed node that is already used
elsewhere can be reused.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Separate cluster startup from test initialisation for tests that start
the cluster with customised configuration. In these cases the result
of the cluster startup is actually the point of the test.
Additionally, pubips.013.failover_noop.sh claims to have completed
test initialisation twice, which just seems wrong.
The result is:
* ctdb_test_init() takes one option (-n) to indicate when it should
not configure/start the cluster
* New function ctdb_nodes_start_custom() accepts options for special
cluster configuration, only operates on local daemons and triggers a
test failure rather than a test error on failure.
Signed-off-by: Martin Schwenke <martin@meltin.net>
The only caller calls ctdb_test_error() on failure and nesting this
calls can be confusing. A future change will make this even more
confusing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Mostly avoidance of quoting warnings.
Silencing warnings about unquoted $CTDB_TEST_CAT_RESULTS_OPTS is
handled by passing '-' to cat when that variable's value is empty.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Apart from the non-constant sourcing of include files.
Mostly avoidance of quoting warnings.
One subtle change is to simply pass "120" to wait_until_ready() to
stop warnings that it expects arguments but none are passed (both
SC2119 and SC2120). There seems no way to indicate to structure
function argument handling so that shellcheck realises arguments are
optional. In later shellcheck versions, disabling SC2120 for a
function also silences complaints about its callers... but not all of
our testing uses "later" shellcheck versions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
* Use "#!/usr/bin/env bash" for improved portability
* Drop test_info() definition and replace it with a comment
The use of test_info() is pointless.
* Drop call to cluster_is_healthy()
This is a holdover from when the previous test would restart daemons
to get things ready for a test. There was also a bug where going
into recovery during the restart would sometimes cause the cluster
to become unhealthy. If we really need something like this then we
can add it to ctdb_test_init().
* Make order of preamble consistent
Signed-off-by: Martin Schwenke <martin@meltin.net>
Avoid:
.../UNIT/shellcheck/scripts/local.sh: line 14: type: shellcheck: not found
The "type" command in dash prints the "not found" message to stdout
but the bash version prints to stderr, so redirect stderr too.
Signed-off-by: Martin Schwenke <martin@meltin.net>
The output in a test failure appears to contain no pstree output
because "00\.test\.script,.*" does not match. However, this is just a
guess because the output is not shown.
Showing the output makes it easier to understand test failures.
Signed-off-by: Martin Schwenke <martin@meltin.net>
This will allow local daemons to be used in more contexts, especially
in tests run by Jenkins where the directory names for some targets can
be very long.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Better compatibility, since od output isn't consistent on FreeBSD.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Mar 10 09:17:12 UTC 2020 on sn-devel-184
When the tests are run interactively this will make it more noticeable
that shellcheck is not installed because the test summary will
indicate missing tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Skipped tests return a status that indicates failure. In combination
with the -e option this results in an exit with failure on the first
skipped test.
Convert skipped test status to success. The skip has already been
counted.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
When "ctdb shutdown" is run with -n <N> it does not wait for the node
<N>'s ctdbd to go down but exits immediately. This means that the
local_daemons.sh shutdown command can find the PID file still present
and then attempt the shutdown, but the daemon can have exited between
the check and the shutdown. Although the test waits until the node is
disconnected, the transport is taken down just before the exit, so
this does not guarantee the daemon has exited.
A local shutdown command (no -n <N>) waits until the socket
disconnects and this happens *after* the PID file is gone, so this is
safe to use with the local_daemons.sh shutdown command.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Mar 2 10:39:28 UTC 2020 on sn-devel-184
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Sat Feb 29 11:53:42 UTC 2020 on sn-devel-184
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Sat Feb 29 08:02:50 UTC 2020 on sn-devel-184
This change basically moves out nmbd references from 50.samba script to
a new 48.netbios script. Accordingly ctdb test scripts are tweaked to
cope with newly added script.
Signed-off-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This depends on a small amount of internal knowledge but is the
cleanest way of avoiding errors for nodes that have already been shut
down.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Separate functions are not needed for stopping/starting/restarting
individual nodes. The stop and start functions essentially just use
onnode, though for local daemons this is embedded in local_daemons.sh.
So, just provide one stop and one start function that takes an
optional nodespec, defaulting to all nodes.
Restarting becomes common.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Typo in variable name db_map_pattern
* Variable num_db_init used before set
* dbmap_pattern does not cover database flags
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Feb 12 04:38:47 UTC 2020 on sn-devel-184
Shellcheck noticed that pnn was never referenced. Not sure this ever
worked or whether it got broken somewhere along the way.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
select_test_node_and_ips() is not required in these cases.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
When running tests from a top-level build, a stale build in ctdb/bin/
will be preferred and may cause confusing results.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
