IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
major changes include:
- added NSTATUS type
- added automatic mapping between dos and nt error codes
- changed all ERROR() calls to ERROR_DOS() and many to ERROR_NT()
these calls auto-translate to the client error code system
- got rid of the cached error code and the writebmpx code
We eventually will need to also:
- get rid of BOOL, so we don't lose error info
- replace all ERROR_DOS() calls with ERROR_NT() calls
but that is too much for one night
This commit gets rid of all our old codepage handling and replaces it with
iconv. All internal strings in Samba are now in "unix" charset, which may
be multi-byte. See internals.doc and my posting to samba-technical for
a more complete explanation.
- removes SMB_ALIGNMENT. That macro caused all sorts of problems with
getting unicode aligned right in sub-protocols (such as SMBtrans and
SMBtrans2). I believe the performance reasons for having
SMB_ALIGNMENT has gone away with the new variants of the SMB
protocol anyway, as newer commands tend to have their own internal
alignment.
- fix the locations where we set smb_flg2 to absolute values. We must
never do this if we want a hope of coping with unicode.
- add initial support for unicode on the wire in smbd. Currently
enabled using SMBD_USE_UNICODE environment variable.
.cvsignore remove config.h - not in this directory
include/profile.h profile changes
lib/messages.c added message to return debug level
libsmb/clierror.c cast to get rid of compiler warning
libsmb/smbencrypt.c cast to get rid of compiler warning
profile/profile.c add flush profile stats changes for profile struct
rpc_parse/parse_samr.c fix for compiler warning
rpc_server/srv_samr.c cast to get rid of compiler warning
smbd/ipc.c profile stats
message.c profile stats
smbd/negprot.c profile stats
smbd/nttrans.c profile stats
smbd/trans2.c profile stats
utils/smbcontrol.c new flush stats command
------------
The following series of commits are for the new tdb based printing
backend. This completely replaces our old printing backend.
Major changes include:
- all print ops are now done in printing/*.c rather than scattered all
over the place
- system job ids are decoupled from SMB job ids
- the lpq parsers don't need to be nearly so smart, they only need to
parse the filename, the status and system job id
- we can store lots more info about a job, including the full job name
- the queue cache control is much better
I also added a new utility routine file_lines_load() that loads a text
file and parses it into lines. This is used in out lpq parsing and I
also want to use it to replace all of our fgets() based code in other
places.
assumption that we have one socket everywhere
while doing so I discovered a few bugs!
1) the clientgen session retarget code if used from smbd or nmbd would
cause a crash as it called close_sockets() which closed our main
socket! fixed by removing close_sockets() completely - it is unnecessary
2) the caching in client_addr() and client_name() was bogus - it could
easily get fooled and give the wrong result. fixed.
3) the retarget could could recurse, allowing an easy denial of
service attack on nmbd. fixed.
was small enough to pass the SMBtrans max data test we weren't setting the
"more data needed" error. I was fogetting the RPC_HEADER_LEN.... I now
check the correct length (current pdu staging area length). More printer
spool enum stuff works now. This bug does not affect TNG.
Jeremy.
pdus, and then feeds them over either a "local" function call or a "remote"
function call to an msrpc service. the "remote" msrpc daemon, on the
other side of a unix socket, then calls the same "local" function that
smbd would, if the msrpc service were being run from inside smbd.
this allows a transition from local msrpc services (inside the same smbd
process) to remote (over a unix socket).
removed reference to pipes_struct in msrpc services. all msrpc processing
functions take rpcsrv_struct which is a structure containing state info
for the msrpc functions to decode and create pdus.
created become_vuser() which does everything not related to connection_struct
that become_user() does.
removed, as best i could, connection_struct dependencies from the nt spoolss
printing code.
todo: remove dcinfo from rpcsrv_struct because this stores NETLOGON-specific
info on a per-connection basis, and if the connection dies then so does
the info, and that's a fairly serious problem.
had to put pretty much everything that is in user_struct into parse_creds.c
to feed unix user info over to the msrpc daemons. why? because it's
expensive to do unix password/group database lookups, and it's definitely
expensive to do nt user profile lookups, not to mention pretty difficult
and if you did either of these it would introduce a complication /
unnecessary interdependency. so, send uid/gid/num_groups/gid_t* +
SID+num_rids+domain_group_rids* + unix username + nt username + nt domain
+ user session key etc. this is the MINIMUM info identified so far that's
actually implemented. missing bits include the called and calling
netbios names etc. (basically, anything that can be loaded into
standard_sub() and standard_sub_basic()...)
- disabled (AGAIN) the GETDC "if (MAILSLOT\NTLOGON)" code that will get
NT5rc2 to work but WILL break win95 (AGAIN). this needs _not_ to be
re-enabled but to be replaced with a better mechanism.
- added SMBwrite support (note: SMBwriteX already existed) as NT5rc2 is
sending DCE/RPC over SMBwrite not SMBwriteX.
----------------------------
- removed DOM_RID4
- removed SAMR_UNKNOWN_32
- added SAMR_SET_USERINFO (opcode 0x32)
- added level 0x1 to SAMR_QUERY_DOM_INFO (needed for create user)
- fixed pwdb_gethexpwd() it was failing on XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
- added mod_sam21pwd_entry()
- preparing to call mod_sam21pwd_entry()
- added "user session key" to user_struct.dc. this is md4(nt#) and is
needed to decode user's clear-text passwords in SAMR_SET_USERINFO.
- split code out in chgpasswd.c to decode 516 byte password buffers.
* Added SAMR_LOOKUP_DOMAIN (-> SamrLookupDomainInSamServer)
* Added real SAMR_ENUM_DOM_GROUPS (corresponding to
SamrEnumerateGroupsInDomain). The existing one is just an alias for
SamrQueryDisplayInformation (see below).
* Added three extra info levels to SAMR_QUERY_DISPINFO. Info level 3 is
what was previously SAMR_ENUM_DOM_GROUPS; info levels 4 and 5 are
simple user/group list requests used by Win9x and I suspect (haven't
checked) the "low speed connection" User Manager.
* Added another two aliases for SAMR_QUERY_DISPINFO, opcodes 0x30 and
0x33. Usually the first is with info level 3 and the second 4 but there is
some overlap so indeed these should be implemented as just aliases.
* Return ERRDOS/ERRmoredata on extra data instead of
STATUS_BUFFER_OVERFLOW for Win95's benefit. On a named pipe this results
in an SMBreadX as usual.
Still need to fix SAMR_QUERY_DOMAIN_INFO which has a hard-coded number of
users and groups - which Win95 proceeds to truncate at.
Tidied up some of the mess (no other word for it). Still doesn't
compile cleanly. There are calls with incorrect parameters that
don't seem to be doing the right thing.
This code still needs surgery :-(.
Jeremy.
lib/util.c: Fixed Luke's set_first_token() function - should return void.
smbd/close.c: Move delete_on_close into file_fd_struct structure.
smbd/ipc.c: Changed local_machine back to fstring.
smbd/nttrans.c: Use defines for mapping share modes.
smbd/open.c: Move delete_on_close into file_fd_struct structure, added code for ALLOW_SHARE_DELETE.
smbd/reply.c: Use defines for mapping share modes.
smbd/trans2.c: Move delete_on_close into file_fd_struct structure.
Jeremy.
(as it is everywhere else).
smbwrapper/smbsh.c: For IRIX n32 binaries, set _RLDN32_LIST not _RLD32_LIST.
Exec users preferred shell is SHELL environment variable is set.
tests/fcntl_lock.c: Added sys/types.h for systems that need this.
Jeremy.
smbd/chgpasswd.c: Fixed (my) stupid bug where I was returning stack based variables. Doh !
smbd/trans2.c: Allows SETFILEINFO as well as QFILEINFO on directory handles.
Jeremy.
smb.tgz file from my portable.
particularly the call to mem_data followed by a realloc of that data in
cli_pipe.c's rpc_read() function.
smbd responses now use p->rdata_i which is a faked-up pointer into
p->rdata's response data. rdata can be very long; rdata_i is limited
to point to no more than max_tsize - 0x18 in length. this will make
it an almost trivial task to add the encrypted rpc headers after
rdata_i, and mem_buf_copy will cope admirably with rhdr chained to
rdata_i chained to auth_verifier etc etc...
