IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is undocumented and is not needed. It was a workaround for
trying to ensure public IP addresses are properly rebalanced after
running "ctdb addip" on multiple nodes. "ctdb reloadips" is a better
solution.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
During the recovery process, the timeout value for sending all controls
is decided by RecoverTimeout tunable. So in the recovery process,
first get the tunables, so the control timeout gets set correctly.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Current NFS and CIFS tickle tests do not test the killtcp
functionality on the releasing node. 2-way killing is done for NFS,
so this test explicitly looks for packets from the releasing node.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
tcpdump does not support filtering on MAC address when reading from a
file. Therefore, this is implemented by conditionally using grep to
filter the output of tcpdump.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There's a tiny chance that the connection information may not be
transferred to other nodes quickly enough, so add an explicit wait.
Also clean up the description and recognise that it is the takeover
node that does the tickling.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the files section uses %{_libexecdir} then CTDB must also be
configured to build and install with the same path, otherwise rpmbuild
can fail due to a mismatch. "rpmbuild --showrc" indicates that the
default %configure command sets:
--libexecdir=%{_libexecdir} \
A mismatch will occur on SUSE systems, where SLES 12 and OpenSUSE 12
set _libexecdir to %{_exec_prefix}/lib.
The failure was initially seen when testing on Debian where
_libexecdir is set to %{_prefix}/lib/x86_64-linux-gnu, though Debian
is an unlikely platform for building RPMs...
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Mar 7 14:43:15 CET 2016 on sn-devel-144
Use real-time priority only for obtaining record and database locks.
Do not open databases with real-time priority as it can cause thundering
herd on fcntl lock while opening tdb database. Also relinquish real-time
priority after the lock is obtained.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Mon Mar 7 11:29:00 CET 2016 on sn-devel-144
CTDB releases all IPs in following cases: starting up, shutting down,
node gets banned, node does not come out of recovery for a long time.
Always inform samba when CTDB releases IP addresses.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
CTDB already notifies Samba with RELEASE_IP message. Samba can take
appropriate action based on that.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This is unmaintained and misleading.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Mar 7 05:00:15 CET 2016 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11770
From man page of packet(7):
protocol is the IEEE 802.3
protocol number in network byte order. See the <linux/if_ether.h>
include file for a list of allowed protocols. When protocol is set to
htons(ETH_P_ALL), then all protocols are received.
Protocol argument was changed from network order to host order wrongly
in commit 9f8395cb7d.
Specifying "protocol" field to socket(AF_PACKET, ...) call only affects
the packets that are recevied. So use protocol = 0 when sending raw
packets.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Mar 4 12:58:50 CET 2016 on sn-devel-144
Anything starting with CTDB_ is appended to each node's configuration
file.
This is made slightly more difficult because the "env" command doesn't
necessarily quote values for consumption by the shell. The strategy
used here is a bit fragile (assumes double-quotes, no nested quotes)
but this is test code and only developers are expected to use this
override.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Tue Mar 1 08:56:09 CET 2016 on sn-devel-144
This uses a configuration file which can be more easily overridden
that explicit command-line options.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
GNU/kFreeBSD's platform name is 'gnukfreebsd', not just 'kfreebsd'.
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Autobuild-User(master): Garming Sam <garming@samba.org>
Autobuild-Date(master): Tue Mar 1 05:42:23 CET 2016 on sn-devel-144
These have been scattered around the code so that
tevent_loop_allow_nesting() can be called. However, only the main
daemon and some tests currently use nested event loops.
TEVENT_DEPRECATED is already defined in the places where it is needed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Feb 26 07:11:29 CET 2016 on sn-devel-144
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Wed Feb 24 11:57:23 CET 2016 on sn-devel-144
If a record is not on a local node, then it is migrated from remote node.
However, before the client can get a lock on the record, it's possible
for the record to get migrated away. In that case, repeat migration.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
There is no allocated memory returned from these functions.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
The database context returned is allocated off the client and is not
allocated from user-supplied TALLOC_CTX.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This is similar to ctdb_client_wait() with additional timeout argument.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
It does not make sense to update this statistic for the timeout case,
since this could skew the statistic. To keep it simple, just update
it for the usual case where there is lock contention, since this is
the usual case. So the daemon statistic measures time to test the
lock and the corresponding recovery daemon statistic measures time to
take the lock.
Additionally, the recovery daemon will eventually use this code to
take the lock, and the method of updating the latency statistic will
need to be pushed further out to a configurable handler that depends
on the calling context.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Feb 23 10:32:06 CET 2016 on sn-devel-144
Have 0 indicate that the lock was taken. This allows non-zero values
to be used to indicate why the lock could not be taken. EACCES means
lock contention.
For now use just EACCES to cover all failures, since
ctdb_recovery_lock() returns a bool and details of other errors will
be lost. ctdb_recovery_lock() will undergo some big changes, so don't
try to fix this now.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This currently returns an incorrect error when the expected number of
bytes are not read. Separate out the different cases to clarify the
logic and avoid reporting the wrong error.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is already done before the destructor is assigned.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The callbacks that use this value are only ever called if recovery
mode is being set to NORMAL. So do not check if recmode is NORMAL
either.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This pattern is used quite a few times in the CTDB code. Many
instances use ctdb_kill() but for signal 0 this just calls kill(2)
anyway.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The child process writes the status into the pipe before looping to
wait.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Where possible, this should no longer be used.
struct ctdb_public_ip_list is a fixed size structure and introduces an
extra level of indirection. This means one level of indirection can
be dropped for known_public_ips and available_public_ips.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Feb 12 08:40:21 CET 2016 on sn-devel-144
Confirm that after re-attaching detached database, it is empty.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
_cluster_is_recovered() is used to check if all the nodes in the
cluster have recovery mode set to NORMAL. This is mainly used just
after recovery to wait till the recovery is over. Instead just check
the recovery mode on node 0.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This matches the behaviour during serial database recovery.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Thu Feb 11 08:01:14 CET 2016 on sn-devel-144
This is unnecessary in Samba >= 4.0 because winbindd monitors IP
address itself and no longer needs to be told when they are dropped.
The smbcontrol commands can hang if a node has recovery mode active
because smbcontrol is unable to connect to the registry. Therefore,
the smbcontrol commands should be removed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11719
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Wed Feb 10 14:08:17 CET 2016 on sn-devel-144
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Uri Simchoni <uri@samba.org>
Autobuild-User(master): Uri Simchoni <uri@samba.org>
Autobuild-Date(master): Tue Feb 9 22:28:08 CET 2016 on sn-devel-144
This reverts commit 0ff90f4fac.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11707
The checks against database generation are not required since
the global generation is updated as part of updating vnnmap
before the actual database recovery. This change was done in
5aab31a39a.
Checking only against the database generation is incomplete. It can
cause CTDB to abort if the following sequence of events happen.
- CTDB gets REQ_DMASTER packet (gen1)
This packet processing gets deferred to get a record lock
- CTDB goes into recovery, marks RECOVERY_ACTIVE
CTDB recovery helper updates vnnmap (gen2)
- CTDB processes REQ_DMASTER packet (gen1)
The check against database generation (gen1) succeeds.
The check for lmaster is now invalid because VNNMAP has changed.
This will cause CTDB to abort due to protocol error.
Reverting the patch stops processing packets of older generation before
they get into call processing.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Tue Feb 9 12:39:24 CET 2016 on sn-devel-144
ctdb/server/ipalloc_lcp2.c:264:29: warning: 'minimbl' may be used uninitialized
in this function [-Wmaybe-uninitialized]
Guenther
Signed-off-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sun Feb 7 00:56:44 CET 2016 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11696
We neither have public headers nor a public library.
Guenther
Signed-off-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Jan 29 04:33:36 CET 2016 on sn-devel-144
Nothing checks it anymore.
This means that the NAT gateway capability in the daemon is now
unused.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The "natgwlist" command is no longer marked "auto all" and is also
marked "without daemon". That latter is not strictly true because
ctdb_natgw needs the daemon so a subsequent invocation of "ctdb
nodestatus" will work. However, "without daemon" is used here because
the top-level "ctdb natgwlist" does not need to open a connection to
the daemon. It just needs to invoke ctdb_natgw.
Update tests to suit.
It would make sense to make "ctdb natgw" generally call out to
ctdb_natgw, passing all argument. However, that can be done later.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These tests deal only with timeouts that can occur retrieving
capabilities. The NAT gateway capability is going away so drop the
tests now to simplify future commits.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To keep this commit comprehensible, 11.natgw and the CTDB CLI tool are
temporarily inconsistent. The tool will be made consistent in a
subsequent commit.
ctdb_natgw_slave_only() is reimplemented to check for the option in
the appropriate line in $CTDB_NATGW_NODES.
Update unit tests and documentation.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Handle the "slave-only" option in the unit test setup. Reindent
function while touching it.
Also drop a test that no longer makes sense. Specifying both "master"
and "slave-only' is now much more obvious, since they need to be on
the same line, and is now punishable by undefined behaviour.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Some features, such NAT gateway and LVS support, can be implemented
without daemon and (internal) ctdb CLI tool support. These are
non-core features that don't need incredible performance and they
don't need to be in the core code. They can easily be reimplemented
in scripts, along with some configuration changes.
For continuity, the ctdb CLI tool code will call out to helper scripts
so that the current status information can still be provided. Those
helper scripts may then reinvoke the ctdb CLI tool to gather
information.
So, redo the tool testing using a "ctdb" stub command. This will
swallow standard input and feed it to the test program each time the
"ctdb" stub is called.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is intended to replace the use of "ctdb natgwlist" in 11.natgw
and provide different views of the NAT gateway status.
It replaces the use of CTDB_NATGW_SLAVE_ONLY=yes with a "slave-only"
keyword in the NAT gateway nodes file. This means the nodes file must
be consistent on all nodes in a NAT gateway group.
Note that this script is not yet integrated, so there are no behaviour
or documentation changes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This has always been the case. Now it is documented and enforced.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Now its name describes its usage and the code reads better.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Each is now used in only one place and the logic is more obvious
without them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
... instead of talloc_zero(). This sets the db_id correctly.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Wed Jan 20 07:28:42 CET 2016 on sn-devel-144
The reqid will be deleted when the client control state is freed.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This allows the client code to optionally clean up and/or re-connect to
CTDB daemon when it the daemon goes away. If no disconnect callback is
registered and CTDB daemon goes away, then the client will terminate.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reduces intentation by using early returns.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Thu Jan 14 22:41:29 CET 2016 on sn-devel-144
These allocate enough memory but things get confusing if they're used
as a guide when updating the code.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Tue Jan 12 22:19:16 CET 2016 on sn-devel-144
Consider this sequence of events:
1. Instance of script running update_tickles() hangs
2. Script debugging is launched asynchronously
3. New instance of script is launched, creates temporary file(s)
4. Original hung script makes progress before asynchronous script
debugging kills it, so it removes temporary file(s)
5. New instance of script produces error due to missing files(s)
This is obviously rare.
Use more unique filenames to avoid step (4) removing the file(s)
belonging to other instances of the script.
This requires some extra cleanup to avoid too many temporary files
(which is why unique filenames were not originally usd). It is
sufficient to remove files modified at least 10 minutes ago.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Whitespace and indentation improvements.
Remove comments describing events, since the README covers that much
better.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
The current code uses so many shell idioms that it is difficult to
follow.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Commit cfa0ffe780 introduced a memory
leak. Never assume...
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
The first element of these structures is a 32-bit PNN. On 64-bit
systems this field can be followed by 32-bits of padding. When the
structures are copied this can cause uninitialised memory to be
copied.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Thousands of these can be generated each second, rendering INFO level
debugging useless.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
assinged -> assigned
Signed-off-by: Karolin Seeger <kseeger@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Jan 11 21:40:36 CET 2016 on sn-devel-144
This is used by the recovery daemon to validate the current recovery
master. Don't risk being unable to elect a new master if the current
master is inactive but unresponsive.
Note that this client call is currently not used by any other callers.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Sun Dec 13 03:17:10 CET 2015 on sn-devel-104
Add a new option -l to check whether POSIX byte range locks are
working. Usage:
node1$ touch /path/to/cluster-fs/FILE
node1$ ./bin/ping_pong -l /path/to/cluster-fs/FILE
Holding lock, press any key to continue...
You should run the same command on another node now.
node2$ ./bin/ping_pong -l /path/to/cluster-fs/FILE
Output can either be:
Holding lock, press any key to continue...
This means POSIX byte range locks are *not* working.
If you see this instead:
file already locked, calling check_lock to tell us who has it locked...:
check_lock failed: lock held: pid='27375', type='1', start='0', len='0'
Working POSIX byte range locks
Congrats, you have a cluster fs with functional byte range locks!
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Dec 10 08:48:38 CET 2015 on sn-devel-104
Shorter temporary variables for compactness/readability. "tmp_ip" is
5 characters longer than "t". In each for statement it is used 4
times, so costs 20 characters. Save those extra characters so that
future edits will avoid going over 80 columns.
Tweak whitespace for readability, rewrap some code.
No functional changes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
As per the comment:
If the IP address is hosted on this node then remove the connection.
Otherwise this function has been called because the server IP
address has been released to another node and the client has exited.
This means that we should not delete the connection information.
The takeover node processes connections too.
This doesn't matter at the moment, since the empty connection list for
an IP address that has been released will never be pushed to another
node. However, it matters if the connection information is stored in
a real replicated database.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
In a subsequent commit ctdb_takeover_client_destructor_hook() needs to
know the VNN. So just have both callers of
ctdb_remove_tcp_connection() do the lookup and pass in the VNN.
This should cause no change in behaviour.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Tickle list updates are broadcast to all connected nodes and are
accepted even when received on the same node that sent them. This
could actually lead to lost connection information when information
about new connections is received while an update is in-flight.
Instead, return early when the IP is hosted on the current node, since
it is the only one that could have sent the update.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Move information about TCP connection tracking and resetting into
ctdb.7.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
exportfs can hang when, for example, DNS is flakey. Given that
exports don't change much, it makes sense to cache them.
Don't try to add error handling when exportfs fails but do print a
warning. Proper error handling can be added separately.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It hasn't worked since commit cda5f02c7c
in 2009, which reworked the banning code. Since then
ctdb_control_modflags() has contained a comment saying:
/* we don't let other nodes modify our BANNED status */
Unbanning all nodes originally occurred here when the recovery master
role moved to a new node. The logic could have been meant for the
case when the old recovery master was malfunctioning, so got banned.
If any other nodes had been banned by this recovery master then they
would be unbanned. However, this would also unban the old recovery
master, which is probably suboptimal. The logic would also trigger if
a node was banned for a good reason and then the recovery master was
stopped. So, apart from doing nothing, the logic is too simplistic so
might as well be removed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The banning code caters for the case where the node specified in the
bantime data is not the node receiving the control. This never
happens. There are 2 places where ctdb_ctrl_set_ban() is called: the
ctdb CLI tool and the recovery daemon. Both pass the same node in the
bantime data that they are sending the control to. There are no plans
to do anything more elaborate, so just delete the handling of this
special case.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the header is specified, then the datalen should be incremented.
There are two ways of marshalling ctdb_rec_data:
1. ctdb_rec_data->header is NULL and ctdb_rec_data->data embeds both
the header and the value. Used in recovery for push/pull of records.
2. ctdb_rec_data->header is not NULL and ctdb_rec_data->data embeds
only the value. Used everywhere else.
In both cases, the wire format includes the header and the value.
There is nothing in the wire format to inform the unmarshalling code
whether to extract the header separately or not.
In the current code the header is extracted depending on whether the
header argument to the extractor routine is NULL or not. This is insane
and highly error-prone.
So in the new API, unmarshalling code never extracts the header. If the
caller requires the header, then it can be extracted separately using
special function ctdb_ltdb_header_extract().
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Wed Nov 25 13:21:48 CET 2015 on sn-devel-104
There can be 0 public addresses.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
ctdb_addr_info->iface can be NULL.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is required when ctdb client wants to send arbitrary data as part
of CTDB_REQ_MESSAGE.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is a duplicate function to ctdb_addr_to_str, but ctdb-util cannot
be linked with the code using new API mainly because it code in ctdb-util
requires struct ctdb_context.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
Since this code does not need any private structures defined in
ctdb_private.h, protocol/protocol.h should suffice.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
This can be easily decomposed into 2 separate arrays.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Nov 23 05:34:55 CET 2015 on sn-devel-104
This puts all of the memory allocation for ipalloc_state into its init
function. This also simplifies the code because
set_ipflags_internal() can no longer fail because it no longer
allocates memory.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is cleaner than returning ipflags and assigning them into
ipalloc_state afterwards.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Instead of local or passed temporary contexts.
This has the side effect of making ipalloc_state available inside the
modified functions, making future use of ipalloc_state simpler.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The only likely failure is out of memory, so just return boolean
value.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These should be created elsewhere. If not then something is wrong, so
don't hide the problem.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Nov 20 04:40:26 CET 2015 on sn-devel-104
As do the functions called below it. They no longer need a CTDB
context.
create_merged_ip_list() now takes both a CTDB context and an
ipalloc_state.
Drop ipalloc_state from CTDB context. So the substitution in the
code is:
ctdb->ipalloc_state -> ipalloc_state
Tweak the test code to match.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
For various reasons create_merged_ip_list() needs a CTDB context.
This is difficult to resolve now for a few reasons, including:
* The ip_tree needs somewhere to live.
It isn't very useful in its current form. However, in the future
real remote IP monitoring will probably be added back, so leave it
around.
* It uses node flags from the ctdb_node structure.
This could be changed by putting a node map into ipalloc_state
and referencing that.
For now, it is easier to move it out to where there will be a CTDB
context available for the forseeable future. ctdb_takeover_run() will
need one as long as the current client interface is used.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The IP allocation algorithms need the value of this tunable, so copy
it to avoid needing the CTDB context.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Algorithm-related tunables from the CTDB context no longer need to be
accessed in the allocation logic.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>