IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Captured packets include a link-layer header, which is considered in
the Linux code but not the PCAP code. Also, the actual captured
length is in caplen, not len.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The current code might be slightly more efficient but
intentionally (although temporarily) modifying a const argument just
seems wrong.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Most packet sizes and offsets are multiples of 32-bit words. The IPv6
payload length is in octets. The IPv6 version is the top 4 bits of
the relevant field.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Calculate each offset from the beginning of the buffer and explicitly
use the sizes of structures.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Ethernet packets must be at least 64 bytes.
For ARP the packet size was limited to 64 bytes. This is probably OK
but the code might as well be a little more general.
For IPv6 NA there was no guarantee that the packet is at least 64
bytes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are numerous places in the code where errno can be lost causing
the wrong error to be printed by a caller. Change ctdb_sys_send_arp()
to always return a useful errno on error instead of returning -1 and
sometimes having errno set correctly.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Finding the interface and the MAC address are obvious. Might as well
set up the common parts of the destination address structure.
Continue to open the socket and find the MAC address first. This
might seem odd because marshalling and other subsequent steps may
fail. However, in the future this code might be optimised to open a
single socket to send ARPs for a list of addresses on each interface,
so don't change the logic.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Commit fa94a49dbb accidentally dropped
some copyright attributions. The original version of system_socket.c
was based on system_linux.c but many parts have been taking from
system_freebsd.c, which had these additional copyright attributions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Confirmation is now received from eventd that it is accepting
connections, so this is no longer needed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13592
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The current method of retrying the connection to eventd means that
messages get logged for each failure.
Instead, pass a pipe file descriptor to eventd and wait for it to
write 0 to the pipe to indicate that it is ready to accept client
connections.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13592
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The pipe will soon be needed earlier, so initialise it earlier.
Ensure the file descriptors are closed on error.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13592
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Other errors free argv, so do it here too.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13592
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The daemon writes 0 into the specified file descriptor when it is up
and listening. This can be used to avoid loops in clients that
attempt to connect until they succeed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13592
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This shows that config file loading continues in spite of unknown keys
if ignore_unknown is true.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use the "failover:disabled" option instead.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Only a "disabled" option for now. Not documented because it isn't
used yet.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is about to become a config file option that can't be dynamically
changed at run-time, so drop this test for now. This test will be added
once the tunable becomes a config file option.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This make the new configuration style more consistent with the old one.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This will become common, so will be useful to have support for.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Negative options can be confusing, so switch to a positive option.
This was supposed to be done months ago but was forgotten.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Values for ctdb.conf options are now returned by
get_ctdb_conf_option(). The main goal is to allow old boolean options
to be replaced by new logically negated options.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This should never have been a user-level option, but some people used
it.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Since commit 9c51b278b1 the compiler has
been able to inline the affected call to uint16_checksum(). Given
that the data (phdr) is being accessed by an incompatible
pointer (data) there is an aliasing problem when the call is inlined.
This results in incorrect behaviour with -O2/-O3 when compiling with
at least GCC 6, 7, and 8.
Fix this by making the types compatible.
Also fixes CID 1437604 (Reliance on integer endianness). This is a
false positive because the uint16_checksum doesn't depend on the order
of the input uint16_t items.
https://bugzilla.samba.org/show_bug.cgi?id=13588
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The queue's input buffer is calculated in an iterative way.
This can result in a few back and forth jumping and
a few memory allocations and mem-free cycles.
This is very time consuming and not required, because the required
memory size can be calculated right away.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Aug 18 04:58:05 CEST 2018 on sn-devel-144
The calculation of the bytes to read from the socket can be done easier
by the usage of the common MIN() macro.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
Kill the ctdb_mutex_ceph_rados_helper with SIGKILL and then confirm
that the lock is automatically released following expiry.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Thu Aug 9 16:26:36 CEST 2018 on sn-devel-144
RADOS locks without expiry persist indefinitely. This results in CTDB
deadlock during failover if the recovery master dies unexpectedly, as
subsequently elected recovery master nodes can't obtain the recovery
lock.
Avoid deadlock by using a lock expiration time (10s by default), and
renewing it periodically.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13540
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
In preparation for adding a lock refresh timer.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Set a handler for SIGINT to release the lock.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ceph-common linkage is needed with new versions of Ceph.
Also respect the --libcephfs_dir=<path> parameter when provided.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
