IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Captured packets include a link-layer header, which is considered in
the Linux code but not the PCAP code. Also, the actual captured
length is in caplen, not len.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The current code might be slightly more efficient but
intentionally (although temporarily) modifying a const argument just
seems wrong.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Most packet sizes and offsets are multiples of 32-bit words. The IPv6
payload length is in octets. The IPv6 version is the top 4 bits of
the relevant field.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Calculate each offset from the beginning of the buffer and explicitly
use the sizes of structures.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Ethernet packets must be at least 64 bytes.
For ARP the packet size was limited to 64 bytes. This is probably OK
but the code might as well be a little more general.
For IPv6 NA there was no guarantee that the packet is at least 64
bytes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are numerous places in the code where errno can be lost causing
the wrong error to be printed by a caller. Change ctdb_sys_send_arp()
to always return a useful errno on error instead of returning -1 and
sometimes having errno set correctly.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Finding the interface and the MAC address are obvious. Might as well
set up the common parts of the destination address structure.
Continue to open the socket and find the MAC address first. This
might seem odd because marshalling and other subsequent steps may
fail. However, in the future this code might be optimised to open a
single socket to send ARPs for a list of addresses on each interface,
so don't change the logic.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Commit fa94a49dbb accidentally dropped
some copyright attributions. The original version of system_socket.c
was based on system_linux.c but many parts have been taking from
system_freebsd.c, which had these additional copyright attributions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The daemon writes 0 into the specified file descriptor when it is up
and listening. This can be used to avoid loops in clients that
attempt to connect until they succeed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13592
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use the "failover:disabled" option instead.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This make the new configuration style more consistent with the old one.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Since commit 9c51b278b1 the compiler has
been able to inline the affected call to uint16_checksum(). Given
that the data (phdr) is being accessed by an incompatible
pointer (data) there is an aliasing problem when the call is inlined.
This results in incorrect behaviour with -O2/-O3 when compiling with
at least GCC 6, 7, and 8.
Fix this by making the types compatible.
Also fixes CID 1437604 (Reliance on integer endianness). This is a
false positive because the uint16_checksum doesn't depend on the order
of the input uint16_t items.
https://bugzilla.samba.org/show_bug.cgi?id=13588
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The queue's input buffer is calculated in an iterative way.
This can result in a few back and forth jumping and
a few memory allocations and mem-free cycles.
This is very time consuming and not required, because the required
memory size can be calculated right away.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Aug 18 04:58:05 CEST 2018 on sn-devel-144
The calculation of the bytes to read from the socket can be done easier
by the usage of the common MIN() macro.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
After
commit e097b7f8ff
Author: David Disseldorp <ddiss@suse.de>
Date: Sun Jul 31 03:14:54 2011 +0200
io: Make queue_io_read() safe for reentry
the destructor has no purpose anymore, therfore, remove it.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Mon Aug 6 11:37:32 CEST 2018 on sn-devel-144
Provides for listing of scripts and chmod enable/disable.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13551
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
When configured with --picky-developer and using -O3 with gcc 8.1:
../common/system_socket.c: In function ‘parse_ip_mask’:
../common/system_socket.c:229:2: error: ‘strncpy’ specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
strncpy(s, str, len+1);
^~~~~~~~~~~~~~~~~~~~~~
../common/system_socket.c:223:8: note: length computed here
len = strlen(str);
^~~~~~~~~~~
Use strlcpy() instead and check the result.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13545
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Defaulting to host public IP addresses when all nodes are unhealthy
does not obey the principle of least surprise. It has caused much
confusion over the years. It often leads to problems when all nodes
are unhealthy due to something like a cluster filesystem being
unmounted.
Change the default value for this tunable as the first step of
completely removing this behaviour.
Remove tests that set NoIPHostOnAllDisabled=1 and update the expected
result for other tests where no nodes are healthy.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The system_<os>.c files contain a lot of duplication, making
maintenance difficult. These functions are being merged into
system_socket.c and system.c.
Bring across ctdb_sys_open_capture_socket(),
ctdb_sys_close_capture_socket() and ctdb_sys_read_tcp_packet().
Remove empty system_<os>.c files.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The system_<os>.c files contain a lot of duplication, making
maintenance difficult. These functions are being merged into
system_socket.c and system.c.
Bring across tcp_checksum(), renamed to ip_checksum().
uint16_checksum() becomes static.
Use the BSD struct tcphdr field names for portability. See the
comment in the code for more details about how we get this to compile
on older glibc versions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The system_<os>.c files contain a lot of duplication, making
maintenance difficult. These functions are being merged into
system_socket.c and system.c.
Bring a copy of tcp_checksum6(), renamed to ip6_checksum().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The system_<os>.c files contain a lot of duplication, making
maintenance difficult. These functions are being merged into
system_socket.c and system.c.
This function doesn't need ctdb_sock_addr so put it with general
system utilities.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The system_<os>.c files contain a lot of duplication, making
maintenance difficult. These functions are being merged into
system_socket.[ch] and system.[ch].
This function doesn't need ctdb_sock_addr so put it with general
system utilities.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
system_socket.[ch] will contain all the raw socket code and other
functions that use ctdb_sock_addr. system.[ch] will contain other
platform dependent functions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Configuration reload should reset the values of configuration options
missing from the config file to default.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Jun 29 15:12:37 CEST 2018 on sn-devel-144
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Jun 22 11:57:19 CEST 2018 on sn-devel-144
