IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Updating ctdb.tdb on each add-client, del-client and each delete
during notify was too ambitious. Persistent transactions do not
perform well enough to do this.
Revert to having add-client and del-client create touch files. Each
monitor event calls "statd-callout update" to convert touch files into
ctdb.tdb records.
Update testcases to do the "update" and add an extra test.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
All tunables set in configuration are currently set to 0 on system
where /bin/sh is dash (and perhaps other non-bash shells). dash puts
single quotes around all values in the output of the "set" builtin
command, whereas bash only puts them around values when something
needs to be quoted. Tunables always have a simple integer value so
dash will quote them and bash won't. The setup code currently passes
the raw value, including any quotes to "ctdb setvar ...". This
command does no error checking on the input, so "'1'" is converted to
0.
Change the code so that the value is determined from the shell
variable and is independent of the "set" output.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Block iSCSI port for families of all address the node is configured to
host.
Could just unconditional add blocking using ip6tables instead.
However, this would produce errors when no IPv6 public addresses are
configured and ip6tables is not installed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Add checking to "releaseip" and "updateip" to ensure that the given IP
address is really on the given interface with the given netmask. If
reality doesn't match the given arguments then believe reality.
Use new function iptables_wrapper() instead of calling iptables()
directly.
Use new function flush_route_cache() instead of doing IPv4-specific
/proc magic.
Remove setting of otherwise unused variable "failed".
Fix a test for which the error message has changed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Also update associated eventscript unit tests and ctdb stub.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Also add and update tests for statd stack dumps. Update the existing
60.ganesha statd test to do more iterations. Duplicate the result as
a new test for 60.nfs.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The current check is incorrect in 2 ways:
* Commit be71a84565e9e7532a77c175732b764d1f42c1cd contained a thinko
that stops virtio_net interfaces from simply being marked up
* virtio_net interfaces can actually be down
virtio_net has supported ethtool since Linux 2.6.29, so just remove
the special case. This means that testing CTDB on very old virtual
machines is not supported.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Thu Jul 31 13:08:47 CEST 2014 on sn-devel-104
This was used to limit damage in the "recovered" event.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Jul 29 10:03:16 CEST 2014 on sn-devel-104
This event was introduced to handle misconfiguration. For example,
where all nodes where configured as NAT gateway slaves.
However, this event can fail when there are performance issues and
capabilities can't be retrieved from a remote node. The problem is
most likely with the remote node, so marking the local node UNHEALTHY
is probably a mistake.
Having a NAT gateway master node only matters in "ipreallocated", so
leave it to do the checking. Given that a node will run
"ipreallocated" as part of the first recovery, this should cause
misconfigurations to be detected nice and early.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Check that the $GANRECDIR symlink points to the location specified by
$CTDB_GANESHA_REC_SUBDIR and replace it if incorrect. This handles
reconfiguration and filesystem changes.
While touching this code:
* Create the $GANRECDIR link as a separate step if it doesn't exist.
This means there is only 1 place where the link is created.
* Change some variables names to the style used for local function
variables.
* Remove some "ln failed" error messages. ln failures will be logged
anyway.
* Add -v to various mkdir/rm/ln commands so that these actions are
logged when they actually do something.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Jun 20 05:40:16 CEST 2014 on sn-devel-104
Backup and restore of the cluster filesystem can upset the operation
of 60.ganesha by changing the contents of this subdirectory.
Allow this subdirectory to be configured to a subdirectory that is
ignored by backup and restore processes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Jun 11 09:29:22 CEST 2014 on sn-devel-104
The range
CTDB_PER_IP_ROUTING_TABLE_ID_LOW..CTDB_PER_IP_ROUTING_TABLE_ID_HIGH
should not include 253-255. Otherwise policy routing may overwrite
the default system routing tables.
Add some corresponding tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is the loop variable. It can't be empty, especially given the
way the list is built. This must have survived from an earlier
version of the script.
Given that there are whitespace changes associated with the above,
clean-up the "virtio_net" avoidance check so that it reads less like
line-noise.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Commit 4ee4925d416a86341bd76c11fa99ec9173682a1d forgot about
CTDB_NATGW_SLAVE_ONLY so it introduces an incorrect failure when this
is set, and CTDB_NATGW_PUBLIC_IFACE or CTDB_NATGW_PUBLIC_IP is unset.
Relax the sanity check to see if CTDB_NATGW_SLAVE_ONLY is set.
Update the documentation to explicitly state that
CTDB_NATGW_PUBLIC_IFACE and CTDB_NATGW_PUBLIC_IP are optional and
unused if CTDB_NATGW_SLAVE_ONLY is set. It would be possible to
insist that CTDB_NATGW_PUBLIC_IFACE and CTDB_NATGW_PUBLIC_IFACE should
be unset in that case. However, it is more reasonable to allow
consistent configuration across nodes except with some nodes
configured slave-only.
Add tests, update infrastructure and fix a thinko in the stub's
"natgwlist" implementation.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Mon Apr 14 06:06:49 CEST 2014 on sn-devel-104
Extend CTDB_NATGW_STATIC_ROUTES so that each network can have an
optional gateway that overrides CTDB_NATGW_DEFAULT_GATEWAY.
Signed-off-by: Martin Schwenke <martin@meltin.net>
This has been implied since the command to add the route has had
errors redirected to /dev/null. If infrastucture (e.g. ADS, DNS) is
on the same network as CTDB_NATGW_PUBLIC_IP then no route is
necessary.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Although the dots in $CTDB_NATGW_PUBLIC_IP could probably only help
match an invalid public IP address, this is only executed once so do
as exact a check as possible.
Use CTDB_BASE instead of hardcoding /etc/ctdb.
Make the error message less redundant.
Signed-off-by: Martin Schwenke <martin@meltin.net>
delete_all() really needed renaming for clarity. While doing this,
might as well rename some of the others that don't start with
"natgw_".
Signed-off-by: Martin Schwenke <martin@meltin.net>
NAT gateway really can't operate unless most of the configuration
variables are set.
A check in delete_all() can be removed - strange that this isn't also
done in the add case.
Signed-off-by: Martin Schwenke <martin@meltin.net>
"statd-callout notify" currently complains until an add-client or
del-client is done.
Given that we might use ctdb.tdb for something else in the future it
makes sense attach to it in the "startup" event. This could be done
in the background but it should be so lightweight that a timeout will
indicate serious problems.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If a primary IP address is being deleted from an interface, the
secondaries are remembered and added back after the primary is
deleted. This is done under a lock shared by the add/del script code.
It is necessary because, by default, Linux deletes secondaries when
the corresponding primary is deleted.
There is a race here between ctdbd and the scripts, since ctdbd
doesn't know about the lock. If ctdbd receives a release IP control
and the IP address is not on an interface then it is regarded as a
"Redundant release of IP" so no "releaseip" event is generated. This
can occur if the IP address in question is a secondary that has been
temporarily dropped. It is more likely if the number of secondaries
is large.
Since Linux 2.6.12 (i.e. 2005) Linux has supported a
promote_secondaries option on interfaces. This option is currently
undocumented but that will change in Linux 3.14. With
promote_secondaries enabled the kernel will not drop secondaries but
will promote a corresponding secondary instead. The kernel does all
necessary locking.
Use promote_secondaries to simplify the code, avoid re-adding
secondaries, avoid re-adding routes and provide improved performance.
This could be done conditionally, with a fallback to legacy
secondary-re-adding code, but no supported Linux distribution is
running a pre-2.6.12 kernel so this is unnecessary.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This adds new files for Ganesha's recovery. myreleaseip_* are used by
the recovery thread on the node where IP is released. The releaseip_*
and tekeip_* files are used by recovery thread where IP is taken over.
Signed-off-by: Srikrishan Malik <srimalik@in.ibm.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Srikrishan Malik <srimalik@in.ibm.com>
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Thu Jan 30 11:18:19 CET 2014 on sn-devel-104
If NFS RPC checks do restart Ganesha, then it's possible that share
check can fail prematurely.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
This is naive and assumes no performance problems when updating
persistent DBs. It also does no error handling.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
The background update is never guaranteed to complete before the cache
is used, so don't bother trying it at the beginning. Instead, put a
timeout on a foreground update.
If the foreground update fails:
* If there's no available cache file then die.
* If there is a previous cache file then use it and log a warning.
* Do a background update at the end of the monitor event.
Also remove commas in the "smb ports" list before use, since (newer?)
testparm seem to insert commas into the default value. Update the
associated test to add a comma.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 8c6f511254ecb0381a609b37e3a0ee6e5ec5d562)
* It should run on "ipreallocated" instead of "recovered"
* Variable name NODE -> ip since that's what it is
* Simplify some logic
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 45e2bc66abf9fcfeadcc279a656ed7fd1838920a)
Routes only need to be updated when IPs have moved. IP takeover runs
will generate "ipreallocated", which is enough. "recovered" always
follows "ipreallocated" anyway, so avoid the redundancy.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 1152215fc69217e4292762e28d193b7ea0e06ee3)
Any time a node changes flags in any significant way there will be a
takeover run, which will generate an "ipreallocated" event. The
"recovered" event always happens straight after a takeover run so we
update the NAT gateway twice.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 542c70d6281d636ecd51502fbbf219f418bfac66)
There is no reconfigure code for these scripts so no need to check for
reconfiguration.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 41df1637c1d8a7b2f5a9974408db71b1f74cb2f2)
Nothing ever (or has ever) set the "needs reconfigure" flag, so this
code is unnecessary.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 5b77fd95bda5f1960aca952e1b759231890b56f3)
Reduce the complexity, including the depth of background processes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 49f077c475b078889ff0492fe7d567a64d6cb87c)
Otherwise calls to "ctdb natgwlist" will not behave as expected if a
non-standard file is used, since that command will use the default
file location.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit e574b30257126679704b088c4334a8e7a53a9c3f)
All CTDB configuration variables should start with CTDB_.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit f12658aff125996ae45eea23241d8c3d0567b893)
