IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This test has been failing with:
Wait until record is migrated to lmaster node 0
<30|BAD: node 0 is not dmaster
dmaster: 1
rsn: 8
flags: 0x00010000 MIGRATED_WITH_DATA
data(6) = "value1"
*** TEST COMPLETED (RC=1) AT 2021-02-02 06:18:48, CLEANING UP...
This should never happen. If this really fails then the wait should
time out.
The problem is that wait_until() does:
"$@" || _rc=$?
and vacuum_test_key_dmaster() currently calls ctdb_test_fail() on
failure, which causes the shell to exit. Instead, pass a variant to
wait_until() that simply returns the correct status instead of
exiting.
An alternative would be to change the statement in wait_until() to do:
("$@") || _rc=$?
so it captures the exit. However, this is a global change and
requires more thought.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is helpful if you are in a listening loop with the same receiver
for many sockets doing the same thing.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Check that the desired state is set on all nodes instead of just the
test node. This ensures that node flags have correctly propagated
across the cluster.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14513
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Oct 6 04:32:06 UTC 2020 on sn-devel-184
This isn't used anywhere and can easily be checked via "ctdb pnn" and
"ctdb recmaster" commands.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Swen Schillig <swen@linux.ibm.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Aug 3 22:21:04 UTC 2020 on sn-devel-184
If nfsconf exists then use it as last resort to attempt to extract
[nfsd]:threads from /etc/nfs.conf.
Invocation of nfsconf requires "|| true" because this script uses "set
-e". Add a stub that always fails to at least test this much.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14444
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Jul 27 07:06:58 UTC 2020 on sn-devel-184
Instead of master/slave.
Nearly all of these are simple textual substitutions, which preserve
the case of the original. A couple of minor cleanups were made in the
documentation (such as "LVSMASTER" -> "LVS leader").
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Instead of master/slave.
Nearly all of these are simple textual substitutions, which preserve
the case of the original.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Avoid use of non-portable md5sum by constructing database names using
index. Improve indentation, use more modern commands, code
improvements (shellcheck).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Wed Jul 22 09:14:35 UTC 2020 on sn-devel-184
Simplify code, use more modern commands, code improvements (shellcheck).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
"wc -l" on some platforms (e.g. FreeBSD) contains leading spaces, so
strip them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Select test node with IPs instead of using a fixed node. Remove
unnecessary code, use more modern commands, code
improvements (shellcheck).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
"wc -l" on some platforms (e.g. FreeBSD) contains leading spaces and
stops "$num from being a number. Create a more portable solution and
put it in a function instead of repeating the logic.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It would be nice to get rid of "onnode any". There's no use making
tests nondeterministic. If covering different cases matters then they
should be explicitly handled.
In most places "any" is replaced by "$test_node". In some cases,
where $test_node is not set, a fixed node that is already used
elsewhere can be reused.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Separate cluster startup from test initialisation for tests that start
the cluster with customised configuration. In these cases the result
of the cluster startup is actually the point of the test.
Additionally, pubips.013.failover_noop.sh claims to have completed
test initialisation twice, which just seems wrong.
The result is:
* ctdb_test_init() takes one option (-n) to indicate when it should
not configure/start the cluster
* New function ctdb_nodes_start_custom() accepts options for special
cluster configuration, only operates on local daemons and triggers a
test failure rather than a test error on failure.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The only caller calls ctdb_test_error() on failure and nesting this
calls can be confusing. A future change will make this even more
confusing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Mostly avoidance of quoting warnings.
Silencing warnings about unquoted $CTDB_TEST_CAT_RESULTS_OPTS is
handled by passing '-' to cat when that variable's value is empty.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Apart from the non-constant sourcing of include files.
Mostly avoidance of quoting warnings.
One subtle change is to simply pass "120" to wait_until_ready() to
stop warnings that it expects arguments but none are passed (both
SC2119 and SC2120). There seems no way to indicate to structure
function argument handling so that shellcheck realises arguments are
optional. In later shellcheck versions, disabling SC2120 for a
function also silences complaints about its callers... but not all of
our testing uses "later" shellcheck versions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Use "#!/usr/bin/env bash" for improved portability
* Drop test_info() definition and replace it with a comment
The use of test_info() is pointless.
* Drop call to cluster_is_healthy()
This is a holdover from when the previous test would restart daemons
to get things ready for a test. There was also a bug where going
into recovery during the restart would sometimes cause the cluster
to become unhealthy. If we really need something like this then we
can add it to ctdb_test_init().
* Make order of preamble consistent
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Avoid:
.../UNIT/shellcheck/scripts/local.sh: line 14: type: shellcheck: not found
The "type" command in dash prints the "not found" message to stdout
but the bash version prints to stderr, so redirect stderr too.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The output in a test failure appears to contain no pstree output
because "00\.test\.script,.*" does not match. However, this is just a
guess because the output is not shown.
Showing the output makes it easier to understand test failures.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This will allow local daemons to be used in more contexts, especially
in tests run by Jenkins where the directory names for some targets can
be very long.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
In certain circumstance, which aren't obvious, cat(1) can fail when
attempting to write a lot of data. This is due to something (probably
write(2)) returning EAGAIN.
Given that the -v option should only really be used for test
debugging, ignore the failure instead of spending time debugging it.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14446
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
In certain circumstance, which aren't obvious, cat(1) can fail when
attempting to write a lot of data. This is due to something (probably
write(2)) returning EAGAIN.
Given that the -v option should only really be used for test
debugging, ignore the failure instead of spending time debugging it.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14446
Signed-off-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Jul 22 04:10:47 UTC 2020 on sn-devel-184
Avoid use of non-portable md5sum by constructing database names using
index. Improve indentation, use more modern commands, code
improvements (shellcheck).
Signed-off-by: Martin Schwenke <martin@meltin.net>
