IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This changes the locking behaviour when the databases are frozen.
Instead of a single lock helper locking all databases with a priority,
a lock helper is launched for every database.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
These variables are used for state information related to freezing
databases. Instead use the API functions to check if the databases
are frozen.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Use ctdb->freeze_mode only in ctdb_freeze.c and use the functions to
check if databases are frozen everywhere else.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
The pending calls are migration requests received from clients (over unix
domain socket) which are under processing. After a recovery is finished,
any requests which are under processing will be dropped since they do
not belong to the current generation. All the pending call requests
are resent with new generation to restart record migrations.
This is in preparation for parallel database recovery.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This iterator only iterates through databases of specified priority.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
These changes enable the default installation prefix settings to
take effect in both Waf 1.5 and 1.8 with no additional code changes.
Signed-off-by: Thomas Nagy <tnagy@waf.io>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Should be an IP address not a filename.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Sat Sep 19 16:39:23 CEST 2015 on sn-devel-104
At the moment they are not installed at all if xsltproc is not
available.
They can still be filtered to have the paths match what was
configured.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Tue Sep 15 11:57:44 CEST 2015 on sn-devel-104
These still say /tmp/ctdb.socket, which is very out-dated. Update
with build-time location.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
In this case: ctdbd_wrapper, onnode, ctdb_diagnostics, ctdb.sudoers.
Set sensible defaults from configure options.
Update documentation to match, trying to fix up anything that has been
missed before.
The onnode unit tests need a symlink to the functions file.
The simple integration tests need to set CTDB_BASE and also
need symlinks to functions/nodes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
fixup
Signed-off-by: Martin Schwenke <martin@meltin.net>
This hasn't existed for a long time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This variable points to /etc/ by default.
This distinguishes it from the different variable from wscript, which
points to /etc/ctdb/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Also fix an unused test to set CTDB_BASE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Clearly identifies where all state files from scripts should go and
allows that location to be easily changed. This patch should not
change any behaviour (outside of eventscript unit tests, where a
clearer location is now used).
CTDB_VARDIR should no longer be overridden. Continue to set
CTDB_DBDIR and similar to override database location in unit tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Have wscript do path substitution.
No need to export this and CTDB_ETCDIR here, but test scripts will
still need to do so.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Format instructions for adding/deleting nodes with appropriate XML and
simplify wording.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Using $CTDB_VARDIR at file scope is dangerous because it doesn't
respect the configuration. Uses of these variables are simple so just
drop the variables and use $CTDB_VARDIR inside functions where it is
safe.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This directory has been under $CTDB_VARDIR for a long time, so is
already removed. The command is also potentially dangerous if
$ctdb_managed_dir is not set.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
They're not used outside of ctdb_standard_event_helper().
As a consequence, make ctdb_standard_event_helper() do nothing. It is
harder to remove because it is used in many places, perhaps by
external eventscripts where it has been copied from existing scripts.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
To get a similar effect just do something like this:
mmaddcallback ctdb-disable-on-quorumLoss \
--command /usr/bin/ctdb \
--event quorumLoss --parms "disable"
mmaddcallback ctdb-enable-on-quorumReached \
--command /usr/bin/ctdb \
--event quorumReached --parms "enable"
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
60.nfs sets this to a directory where the NFS callout can store state.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Sep 14 08:36:34 CEST 2015 on sn-devel-104
sockets are created in a loop until an unused address is found.
But the unused socket fds were not closed.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Just use ctdb_tcp_connection. It is the same. There are no external
users.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Sep 3 22:12:02 CEST 2015 on sn-devel-104
Always check filesystem usage for the database directories.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Sat Aug 29 20:08:48 CEST 2015 on sn-devel-104
CTDB should warn by default if too much system memory or swap is used.
The tests have also been tweaked. In particular, the filesystem-only
tests need to initialise the memory information to avoid errors where
meminfo isn't set.
Document the defaults, warning against disabling them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
They are only printed when the percentage usage changes. This should
stop the logs from being filled with warnings.
Add a test for the throttling.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Marking the node unhealthy should cause Samba processes to close,
possible freeing a stack of memory. If not, then it is somebody
else's problem.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
New variables CTDB_MONITOR_MEMORY_USAGE and CTDB_MONITOR_SWAP_USAGE.
Both take a pair of <warn_threshold>:<unhealthy_threshold> where each
theshold is specified as a percentage.
This adds a callout to check_thresholds() that is run when the
unhealthy threshold is reached.
Add some combination tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
